Re: [hylafax-users] Hylafax v4.3.4-1 on Redhat Linux AS 3 update 8; multitech MT5656ZDX

[srikanth.s.sureddy@xxxxxxxxxxx]

Hi Andrew, 

But the problem here is that its not
able to initialize the modem. I get this in the log file.

Jan 25 14:28:34 cpcrefax1 FaxGetty[2849]:
MODEM set DTR OFF
Jan 25 14:28:34 cpcrefax1 FaxGetty[2849]:
MODEM set DTR ON
Jan 25 14:28:37 cpcrefax1 FaxGetty[2849]:
MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Jan 25 14:28:37 cpcrefax1 FaxGetty[2849]:
MODEM flush i/o
Jan 25 14:29:07 cpcrefax1 FaxGetty[2849]:
MODEM TIMEOUT: reading line from modem
Jan 25 14:29:07 cpcrefax1 FaxGetty[2849]:
MODEM set DTR OFF
Jan 25 14:29:07 cpcrefax1 FaxGetty[2849]:
/dev/ttyS04: Can not initialize modem.
Jan 25 14:29:39 cpcrefax1 FaxGetty[2849]:
MODEM set DTR OFF
Jan 25 14:29:39 cpcrefax1 FaxGetty[2849]:
MODEM set DTR ON
Jan 25 14:29:42 cpcrefax1 FaxGetty[2849]:
MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Jan 25 14:29:42 cpcrefax1 FaxGetty[2849]:
MODEM flush i/o
Jan 25 14:30:12 cpcrefax1 FaxGetty[2849]:
MODEM TIMEOUT: reading line from modem
Jan 25 14:30:12 cpcrefax1 FaxGetty[2849]:
MODEM set DTR OFF
Jan 25 14:30:12 cpcrefax1 FaxGetty[2849]:
MODEM set DTR ON
Jan 25 14:30:16 cpcrefax1 FaxGetty[2849]:
MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Jan 25 14:30:16 cpcrefax1 FaxGetty[2849]:
MODEM flush i/o
Jan 25 14:30:46 cpcrefax1 FaxGetty[2849]:
MODEM TIMEOUT: reading line from modem
Jan 25 14:30:46 cpcrefax1 FaxGetty[2849]:
MODEM set DTR OFF

Not sure if the uart is the culprit
here?.

Thanks,
Srikanth
972-399-4052 (off)

Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx>
Sent by: hylafax-users-bounce@xxxxxxxxxxx

01/25/2008 01:53 PM

To	Srikanth S. Sureddy/EMPL/TX/Verizon@VZNotes
cc	hylafax-users@xxxxxxxxxxx
Subject	Re: [hylafax-users] Hylafax v4.3.4-1 on Redhat Linux AS 3 update 8; multitech MT5656ZDX

srikanth.s.sureddy@xxxxxxxxxxx wrote:
> I have the same setup on a different site with redhat AS 3 update
3 and 
> hylafax v4.3.4-1 and multi tech mt5656ZDX. The only difference is
the 
> uart is 16550A on the one which hylafax works and it is 16950 on the
one 
> which does not work.

The 16950 uses a different driver and may be the source of your 
problems.  To find out, disable HylaFAX, disconnect the modem, and
plug 
in a RS232 loopback cable... then run some tests that send/receive large
amounts of data over the RS232 port.  If this works then you know
the 
problem is elsewhere.

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*