Re: [hylafax-users] abundance of Send errors

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

George H wrote:

(session c000001038.txt)

> Jan 17 10:28:17.80: [14408]: SEND send PPS (partial page signal)
> Jan 17 10:28:17.80: [14408]: SEND send EOM (more documents)
> Jan 17 10:28:17.80: [14408]: <-- [9:AT+FRH=3\r]
> Jan 17 10:28:18.19: [14408]: --> [7:CONNECT]
> Jan 17 10:28:19.08: [14408]: --> HDLC<5:FF C8 31 45 8F>
> Jan 17 10:28:19.08: [14408]: --> [2:OK]
> Jan 17 10:28:19.08: [14408]: SEND recv MCF (message confirmation)
> Jan 17 10:28:19.08: [14408]: DELAY 70 ms
> Jan 17 10:28:19.15: [14408]: SEND end page
> Jan 17 10:28:19.15: [14408]: SEND FAX (000001038): FROM 
> user@xxxxxxxxxxxxxxxxxxxxx TO 01/444444 (page 2 of 2 sent in 0:00:09)
> Jan 17 10:28:19.15: [14408]: SEND FAX (000001038): FROM 
> user@xxxxxxxxxxxxxxxxxxxxx TO 01/444444 (docq/doc392.ps;f0 sent in 
> 0:00:20)
> Jan 17 10:28:20.17: [14408]: SEND FAX: JOB 389 DEST 01/444444 COMMID 
> 000001038 DEVICE '/dev/ttyS1' FROM 'User <user@xxxxxxxxxxxxxxxxxxxxx>' 
> USER uucp
> Jan 17 10:28:20.17: [14408]: MODEM set XON/XOFF/FLUSH: input ignored, 
> output disabled
> Jan 17 10:28:20.17: [14408]: <-- [9:AT+FRH=3\r]
> Jan 17 10:28:20.23: [14408]: --> [7:CONNECT]
> Jan 17 10:28:20.24: [14408]: --> [2:10 03]
> Jan 17 10:28:20.24: [14408]: --> [5:ERROR]
> Jan 17 10:28:20.24: [14408]: MODEM Command error
> Jan 17 10:28:20.24: [14408]: FCS error
> Jan 17 10:28:20.24: [14408]: DELAY 70 ms
> Jan 17 10:28:20.31: [14408]: <-- [9:AT+FTH=3\r]
> Jan 17 10:28:20.38: [14408]: --> [7:CONNECT]
> Jan 17 10:28:20.38: [14408]: <-- HDLC<3:FF C8 D8>
> Jan 17 10:28:20.38: [14408]: <-- data [3]
> Jan 17 10:28:20.38: [14408]: <-- data [2]
> Jan 17 10:28:21.68: [14408]: --> [2:OK]
> Jan 17 10:28:21.68: [14408]: SEND send CRP (command repeat)
> Jan 17 10:28:21.68: [14408]: <-- [9:AT+FRH=3\r]
> Jan 17 10:28:35.69: [14408]: --> [0:]
> Jan 17 10:28:35.69: [14408]: MODEM <Empty line>
> Jan 17 10:28:35.69: [14408]: MODEM TIMEOUT: waiting for v.21 carrier
> Jan 17 10:28:35.69: [14408]: <-- data [1]
> Jan 17 10:28:35.75: [14408]: --> [2:OK]

We've seen this before on your outbound jobs... this is a batch session, 
and your USR modems aren't behaving well with them.  You should probably 
disable batching with your USR modems... MaxBatchJobs: 1 in 
/var/spool/hylafax/etc/config.  Or at least disable batching to this 
destination when using the USR modem.

(session c000001039.txt)

> Jan 17 10:31:13.94: [14605]: SEND training at v.17 14400 bit/s
> Jan 17 10:31:13.94: [14605]: DELAY 70 ms
> Jan 17 10:31:14.01: [14605]: <-- [9:AT+FTH=3\r]
> Jan 17 10:31:14.09: [14605]: --> [7:CONNECT]
> Jan 17 10:31:14.09: [14605]: <-- HDLC<23:FF C0 C2 4E A6 6E 4E A6 CA 04 
> 1E 86 62 04 B2 F2 32 82 42 04 04 04 04>
> Jan 17 10:31:14.09: [14605]: <-- data [23]
> Jan 17 10:31:14.09: [14605]: <-- data [2]
> Jan 17 10:31:19.76: [14605]: --> [2:OK]
> Jan 17 10:31:19.76: [14605]: Error sending T.30 prologue frames

The USR modem is malfunctioning again, here.  Notice that it's taking 
over 5 seconds to transmit a 23-byte HDLC frame with V.21... it should 
only take maybe a second.  Something is wrong.  We could try increasing 
the timeout setting there to permit the 5-second delay... but the 
session probably is doomed due to this issue.

Session c000001042.txt looks the same as c000001039.txt to me.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*