Re: [hylafax-users] broken hlya.conf: hylafax-5.2.1-1

[razidan <razidan@xxxxxxxxxxxxxxx>]

Robert, i misunderstood your post. i mistook hyla.conf for hfaxd.conf. 
very sorry.

my hyla.conf ( from hylafax+ 5.2.1 - source not rpm ) is at 
/usr/local/lib/fax/hyla.conf and it contains those same font lines that 
u mentioned. everything is working on my setup except that i cant get 
some pdf files.... other than that everything is ok....

i suggest u try to send fax -> check log
                   receive fax -> check log

and then come back to the list if u still have issues...

bye,
raz

Robert Moskowitz wrote:
> razidan wrote:
> > robert,
> >
> > Robert Moskowitz wrote:
> > > I installed the FC6 version of: hylafax-5.2.1-1.i386.rpm on a Centos 
> > > 5 system.
> > >
> > > I ran faxsetup, answering yes or just pressing enter for each 
> > > question except supplying my area code and no to running faxmodem.
> > >
> > > Now my /etc/hylafax/hyla.conf is basically empty and has a few very 
> > > long font lines.
> >
> > that's odd.
> >
> > > Thinking back to running faxsetup, I recall that a number of prompts 
> > > were: [] and I did not supply anything. Could that be my error?
> >
> > when u dont type anything, it means the default values will be used.
> >
> > > So I go and run faxsetup again, and all it does is confirm my config, 
> > > does not let me redo the config.
> >
> > delete the config n try again?
> Did that. It just acted as if it were confirming the conf. Did not ask 
> any questions, and just built this file:
>
> # FontMap/FontPath added by faxsetup (Fri Jan 11 12:18:03 EST 2008)
> FontMap: 
> /usr/share/ghostscript/8.15/lib:/usr/share/ghostscript/8.15/Resource:
> /usr/share/ghostscript/fonts:/usr/share/fonts/default/ghostscript:/usr/share/fon 
>
> ts/default/Type1:/usr/share/fonts/default/amspsfnt/pfb:/usr/share/fonts/default/ 
>
> cmpsfont/pfb:/usr/share/fonts/japanese:/etc/ghostscript:/usr/share/ghostscript/8 
>
> .15/lib:/usr/share/ghostscript/8.15/Resource:/usr/share/ghostscript/fonts:/usr/s 
>
> hare/fonts/default/ghostscript:/usr/share/fonts/default/Type1:/usr/share/fonts/d 
>
> efault/amspsfnt/pfb:/usr/share/fonts/default/cmpsfont/pfb:/usr/share/fonts/japan 
>
> ese:/etc/ghostscript
> FontPath: 
> /usr/share/ghostscript/8.15/lib:/usr/share/ghostscript/8.15/Resource:
> /usr/share/ghostscript/fonts:/usr/share/fonts/default/ghostscript:/usr/share/fon 
>
> ts/default/Type1:/usr/share/fonts/default/amspsfnt/pfb:/usr/share/fonts/default/ 
>
> cmpsfont/pfb:/usr/share/fonts/japanese:/etc/ghostscript:/usr/share/ghostscript/8 
>
> .15/lib:/usr/share/ghostscript/8.15/Resource:/usr/share/ghostscript/fonts:/usr/s 
>
> hare/fonts/default/ghostscript:/usr/share/fonts/default/Type1:/usr/share/fonts/d 
>
> efault/amspsfnt/pfb:/usr/share/fonts/default/cmpsfont/pfb:/usr/share/fonts/japan 
>
> ese:/etc/ghostscript
>
> Note that those lines are wrapped. There are really only 3 ines in the 
> file.
>
> > > Help?
> > >
> > > Should I just copy a hyla.conf from a hylafax 4.4.2 (Centos 4 Trixbox 
> > > 2.2.10) system? I notice its hyla.conf does not have any of these 
> > > font lines....
> >
> > worth a try. do the above first though.... 
> And what to do with the font lines....


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*