Re: [hylafax-users] HDLC frame not byte-oriented

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi George,

No, but even if we fix this problem then we will just move onto others
because it's a USR modem.... that's why I gave the 'simple' answer....
obviously, other people are free to debug the logs and give the 'complex'
answer... personally, given Nicola is using a recent HylaFAX version then I
really don't think it's worth the time debugging USR problems once again.

If you are any doubt about the problems that exist for many USR users then
search the Hylafax or Microsoft SBS archives.

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of George H
Sent: 19 December 2007 15:59
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] HDLC frame not byte-oriented

On Dec 19, 2007 5:35 PM, Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx> wrote:
> Hi Nicola,
>
> The simple answer is get yourself a decent modem - something with a 
> Agere Venus chipset is a good start... however, if this is an 
> important installation then you might want to consider a fax board;
>
> http://www.mainpine.com/products_IQE.php

So you are 100% certain that the problems he is getting (as specified in his
error log attached) is being produced by his US Robotics modem ?

> Regards
>
> Andrew Rinaldi
> Mainpine Developer Support
> USA +1 503 822 9944 | UK +44 8458 909438 andrew.rinaldi@xxxxxxxxxxxx | 
> www.mainpine.com <http://www.mainpine.com/>
>   _____
>
> From: hylafax-users-bounce@xxxxxxxxxxx 
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of nicola nicola
> Sent: 19 December 2007 14:57
> To: hylafax-users@xxxxxxxxxxx
> Subject: [hylafax-users] HDLC frame not byte-oriented
>
>
>
> Hi,
> i have sometimes problems to receive fax...
> My sistem is:
> Hylafax server 4.4.3 on SME server 7.3 modem 33.6 SporterVoice 
> USRobotics it was on class 2.0 first but i know that sometimes i have 
> problem to receive so i put it in class 1, but i have problem again!!!
> Attachment you can see error logs (there are many from the same 
> sender), my modem config, i have to change it?
> Thanks.
> Nicola.
>
>   _____
>
> Never miss a thing. Make Yahoo
> <http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs> your
homepage.
>
>



--
"Nothing is impossible for the person that doesn't have to do it"
"The probability of anything happening is in inverse ratio to its
desirability"
"The problem is not freedom of choice, it is about the choices you have.
Choice is always limited by the number of alternatives presented to you"
--
George H
george.dma@xxxxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

<<attachment: winmail.dat>>