Re: [hylafax-users] HDLC frame not byte-oriented

["George H" <george.dma@xxxxxxxxx>]

On Dec 19, 2007 5:35 PM, Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx> wrote:
> Hi Nicola,
>
> The simple answer is get yourself a decent modem - something with a Agere
> Venus chipset is a good start... however, if this is an important
> installation then you might want to consider a fax board;
>
> http://www.mainpine.com/products_IQE.php

So you are 100% certain that the problems he is getting (as specified
in his error log attached) is being produced by his US Robotics modem
?

> Regards
>
> Andrew Rinaldi
> Mainpine Developer Support
> USA +1 503 822 9944 | UK +44 8458 909438
> andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com <http://www.mainpine.com/>
>   _____
>
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of nicola nicola
> Sent: 19 December 2007 14:57
> To: hylafax-users@xxxxxxxxxxx
> Subject: [hylafax-users] HDLC frame not byte-oriented
>
>
>
> Hi,
> i have sometimes problems to receive fax...
> My sistem is:
> Hylafax server 4.4.3 on SME server 7.3
> modem 33.6 SporterVoice USRobotics
> it was on class 2.0 first but i know that sometimes i have problem to
> receive so i put it in class 1, but i have problem again!!!
> Attachment you can see error logs (there are many from the same sender), my
> modem config, i have to change it?
> Thanks.
> Nicola.
>
>   _____
>
> Never miss a thing. Make Yahoo
> <http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs> your homepage.
>
>



-- 
"Nothing is impossible for the person that doesn't have to do it"
"The probability of anything happening is in inverse ratio to its desirability"
"The problem is not freedom of choice, it is about the choices you
have. Choice is always limited by the number of alternatives presented
to you"
--
George H
george.dma@xxxxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*