Re: [hylafax-users] HDLC frame not byte-oriented

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Nicola,
 
The simple answer is get yourself a decent modem - something with a Agere
Venus chipset is a good start... however, if this is an important
installation then you might want to consider a fax board;
 
http://www.mainpine.com/products_IQE.php
 
Regards
 
Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com <http://www.mainpine.com/> 
  _____  

From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of nicola nicola
Sent: 19 December 2007 14:57
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] HDLC frame not byte-oriented


Hi,
i have sometimes problems to receive fax...
My sistem is:
Hylafax server 4.4.3 on SME server 7.3
modem 33.6 SporterVoice USRobotics
it was on class 2.0 first but i know that sometimes i have problem to
receive so i put it in class 1, but i have problem again!!!
Attachment you can see error logs (there are many from the same sender), my
modem config, i have to change it?
Thanks.
Nicola.

  _____  

Never miss a thing. Make Yahoo
<http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs> your homepage.

<<attachment: winmail.dat>>