Re: [hylafax-users] Failed Faxes - failure to train remote modem at 2400 bps

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Bryan Glass - Party Stuff & U-Rent-It wrote:
> DEVICE '/dev/ttyc16'

What kind of device is ttyc16?  Sure, the modem is a USR.  But what 
device is the serial device (serial port) on ttyc16?

> Dec 11 21:44:39.54: [ 5082]: <-- [9:AT+FRH=3\r]
> Dec 11 21:44:40.12: [ 5082]: --> [7:CONNECT]
> Dec 11 21:44:40.75: [ 5082]: --> HDLC<5:FF C8 22 67 DD>
> Dec 11 21:44:40.75: [ 5082]: --> [2:OK]

The receiver is constantly responding with FTT to your training 
signals... so either there is some kind of audio corruption going on 
between your modem and the receiver, or there is an incompatibility 
between your modem and the receiver.  (I guess there's also a 
possibility that something is just plain wrong with your modem or the 
receiver.)

The fact that the session went through both V.29 and V.27ter leads me to 
believe that it's not likely an incompatibility (because it would be an 
incompatibility on both modem protocols... which is significantly less 
likely to be the case).  Most likely there is some audio problem between 
you and them.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*