Re: [hylafax-users] No Local Dialtone intermittend

["Hans Bernard" <Hans.Bernard@xxxxxxxxxxxxx>]

Hi Guys, 

After double checking everything for a las time I found a UTP cable
(where 4 lines are connected to) Broken. This has now been double
checked with a cable tester. 

After this change it looks OK this night we will send out 500 faxes and
I will let you know the result. 


Big thanks to everyone. 

Hans Bernard, MCP
Associate Systems Administrator 
Global Central Labs at PPD 
Kleine Kloosterstraat 19 
1932 Zaventem 
Belgium 
Tel: +32 (0)2 416 42 22 
Fax: +32 (0)2 725 21 02 
hans.bernard@xxxxxxxxxxxxx
 


-----Original Message-----
From: Andrew Rinaldi [mailto:andrew.rinaldi@xxxxxxxxxxxx] 
Sent: Tuesday, December 11, 2007 11:12
To: Hans Bernard
Cc: hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] No Local Dialtone intermittend

Hi Hans,

Do you have the latest firmware and driver from MultiTech ?  You must
ensure that your driver version is compatible with your kernel
version.... just because they seem to 'work' does not mean that they are
going to be reliable.  If I remember correctly, the ISI uses a
proprietary driver.

Is this REALLY an analog line from the Telco ?  You mentioned DID in one
of your earlier posts which could be an issue.  Have you tried this at a
different location ?

Have you tried changing the country code of your modem ?  Some modems
need to know where they are located in order to modify their behaviour
to match the local phone network.  What country does the modem report in
Minicom (look at your user manual - probably a AT+GCI=? command).

If you connect a modem to the analog line and use Minicom to dial your
cell phone number does it ring every time ?  Even if you do it 100 times
?  Use a simple dial command to begin these tests - ATDTphonenumber.

Do you have a second analog line and fax machine in your facility ?  If
you do then connect the fax machine and use Minicom to dial the fax
number.  Does it ring every time ?  Do you hear the CED tones from the
fax machine (this only works if you have a speaker on your modem).  Now
try dialling the modem from the fax machine.... does the modem display
'RING' on Minicom ?  If it does then try an ATA command to see if the
modem will answer the call.

What you are trying to do is to prove that the modem and line are
compatible and working.  You are not expecting to see any errors.  If
any of these tests fail then you should talk to MultiTech support
because this is not a HylaFAX issue.

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Hans Bernard
Sent: 11 December 2007 07:49
To: Lee Howard
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] No Local Dialtone intermittend

Hi Lee, 

I added the line to my config and have the following error.

18983 Wed08AM  125  S    sdm FAX.YYY.01.11DEC07.082942.sdm 02-7252102
0:1   2:4  No carrier detected

My config file

LogFacility:            daemon
CountryCode:            32
AreaCode:               2
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
ModemGroup:             "any:ttyMU2[a-f]"
JobReqBusy:             480

Kind regards,

Hans Bernard, MCP
Associate Systems Administrator
Global Central Labs at PPD
Kleine Kloosterstraat 19
1932 Zaventem
Belgium
Tel: +32 (0)2 416 42 22
Fax: +32 (0)2 725 21 02
hans.bernard@xxxxxxxxxxxxx
 

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Monday, December 10, 2007 18:10
To: Hans Bernard
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] No Local Dialtone intermittend

Hans Bernard wrote:
> AT
> OK
> ATX3DT0024164222
> NO CARRIER
> ATX3DT,,0,,024164222
> NO CARRIER
>   

I'm not sure what this tells us, but notice there is no "NO LOCAL
DIALTONE" error.  Put this into your modem configuration file:

ModemDialCmd:  ATX3DT,,0,%s

Make sure you don't add the 0 to your dialstring, since it will be
automatically added as you put it into ModemDialCmd.

Lee.


______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this
transmission in error, please immediately notify the sender by telephone
or return email and delete the original transmission and its attachments
without reading or saving in any manner.



____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*