Re: [hylafax-users] No Local Dialtone intermittend

["Hans Bernard" <Hans.Bernard@xxxxxxxxxxxxx>]

Hi Andrew, 

The Dial tone error is intermitted. 

I get about 60% out if y hook them up to my Analogie gateway 24 port
Cisco. 

As I got the id it could be my Analogue gateway I hooked everything up
onto Analoge Lines (Old fashion). Te fail rate is still huge and the
error stays. 

Butt 60% works and this on different modems so its not only one modem.

Kind regards, 

Hans Bernard, MCP
Associate Systems Administrator 
Global Central Labs at PPD 
Kleine Kloosterstraat 19 
1932 Zaventem 
Belgium 
Tel: +32 (0)2 416 42 22 
Fax: +32 (0)2 725 21 02 
hans.bernard@xxxxxxxxxxxxx
 


-----Original Message-----
From: Andrew Rinaldi [mailto:andrew.rinaldi@xxxxxxxxxxxx] 
Sent: Monday, December 10, 2007 14:56
To: Hans Bernard
Cc: hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] No Local Dialtone intermittend

Hi Hans,

Are you sure you can call out on this line ?  Many DID lines are receive
only.

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Hans Bernard
Sent: 10 December 2007 13:50
To: Lee Howard
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] No Local Dialtone intermittend

Hi Lee, 

I tested the AT command in minicom and get the following

AT
OK
ATX3DT0024164222
NO CARRIER
ATX3DT,,0,,024164222
NO CARRIER

The number you see is a DID test line so it should at least ring my test
phone

I also tried to add pauses before and after the Leading zero

Kind regards, 

Hans Bernard, MCP
Associate Systems Administrator
Global Central Labs at PPD
Kleine Kloosterstraat 19
1932 Zaventem
Belgium
Tel: +32 (0)2 416 42 22
Fax: +32 (0)2 725 21 02
hans.bernard@xxxxxxxxxxxxx
 

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Monday, December 10, 2007 14:28
To: Hans Bernard
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] No Local Dialtone intermittend

Hans Bernard wrote:
> Hi Lee,
>
> Thanks for the quick response. 
>
> I tried: ModemDialCmd:   ATDT,,%s
>
> But still getting allot of failed faxes with the following status. 
>
> No local dialtone; too many attempts

Try:

ModemDialCmd:  ATX3DT%s

Lee.


______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this
transmission in error, please immediately notify the sender by telephone
or return email and delete the original transmission and its attachments
without reading or saving in any manner.



____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*