![]() |
Hi Lee, I tested the AT command in minicom and get the following AT OK ATX3DT0024164222 NO CARRIER ATX3DT,,0,,024164222 NO CARRIER The number you see is a DID test line so it should at least ring my test phone I also tried to add pauses before and after the Leading zero Kind regards, Hans Bernard, MCP Associate Systems Administrator Global Central Labs at PPD Kleine Kloosterstraat 19 1932 Zaventem Belgium Tel: +32 (0)2 416 42 22 Fax: +32 (0)2 725 21 02 hans.bernard@xxxxxxxxxxxxx -----Original Message----- From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] Sent: Monday, December 10, 2007 14:28 To: Hans Bernard Cc: hylafax-users@xxxxxxxxxxx Subject: Re: [hylafax-users] No Local Dialtone intermittend Hans Bernard wrote: > Hi Lee, > > Thanks for the quick response. > > I tried: ModemDialCmd: ATDT,,%s > > But still getting allot of failed faxes with the following status. > > No local dialtone; too many attempts Try: ModemDialCmd: ATX3DT%s Lee. ______________________________________________________________________ This email transmission and any documents, files or previous email messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient or a person responsible for delivering this transmission to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by telephone or return email and delete the original transmission and its attachments without reading or saving in any manner. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*