Re: [hylafax-users] No Local Dialtone intermittend

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Hans,

It's probably worth calling MultiTech to ensure they have no known
compatibility issues with your Kernel version.

I'd also suggest that you have the latest firmware and try a number of
different country code settings.

Does your Minicom test work every time ?  Are you using exactly the same AT
commands in your tests ?  What happens if you try this on a line in a
different building ?

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Hans Bernard
Sent: 10 December 2007 07:50
To: Lee Howard
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] No Local Dialtone intermittend

Hi Lee, 

Thanks for the quick response. 

I tried: ModemDialCmd:   ATDT,,%s

But still getting allot of failed faxes with the following status. 

No local dialtone; too many attempts

Kind regards, 

Hans Bernard, MCP
Associate Systems Administrator
Global Central Labs at PPD
Kleine Kloosterstraat 19
1932 Zaventem
Belgium
Tel: +32 (0)2 416 42 22
Fax: +32 (0)2 725 21 02
hans.bernard@xxxxxxxxxxxxx
 

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Friday, December 07, 2007 20:17
To: Hans Bernard
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] No Local Dialtone intermittend

Hans Bernard wrote:
>
> Hi Guys,
>
>  
>
> I am running a HylaFAX server 4.4.4 on a Redhat Linux Enterprise 
> Edition 3 Update 7 with 2 Mutlitech ISI5634UPCI/8 modemcard.
>
>
> We now have two issues
>
>  
>
> 1)       The faxq stops working and I get this message on there
>
> a.       FIFO: open: No such device or address
>

I would be very surprised if this happens on HylaFAX+ 5.2.0.

> 2)       I get allot of faxes with No Dialtone error
>
> a.       I know the lines are working
>
> b.       The modem has been tested with minicom
>
> c.       I removed the fax lines from our analogue gateway and put 
> them on old fasion Analogue lines. This is a little beter but not here
yet
>
> d.       It looks like timing issue the modem card seems to fast for 
> the analogue line.
>

Try putting a bit of a pause into your dialstring like this:

ModemDialCmd:   ATDT,,%s

Lee.


______________________________________________________________________
This email transmission and any documents, files or previous email messages
attached to it may contain information that is confidential or legally
privileged. If you are not the intended recipient or a person responsible
for delivering this transmission to the intended recipient, you are hereby
notified that you must not read this transmission and that any disclosure,
copying, printing, distribution or use of this transmission is strictly
prohibited. If you have received this transmission in error, please
immediately notify the sender by telephone or return email and delete the
original transmission and its attachments without reading or saving in any
manner.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

<<attachment: winmail.dat>>