![]() |
The log required is this:
Dec 10 10:35:29.48: [31534]: SESSION BEGIN 000019629 555123123
Dec 10 10:35:29.48: [31534]: HylaFAX (tm) Version 4.2.1
Dec 10 10:35:29.48: [31534]: SEND FAX: JOB 13346 DEST 555123123 COMMID 000019629 DEVICE '/dev/ttyS1
'
Dec 10 10:35:29.48: [31534]: <-- [12:AT+FCLASS=1\r]
Dec 10 10:35:29.72: [31534]: --> [2:OK]
Dec 10 10:35:29.72: [31534]: DIAL 555123123
Dec 10 10:35:29.72: [31534]: <-- [19:ATDT0,555123123#@\r]
Dec 10 10:36:42.78: [31534]: --> [10:NO CARRIER]
Dec 10 10:36:42.78: [31534]: SEND FAILED: JOB 13346 DEST 555123123 ERR No carrier detected
Dec 10 10:36:42.78: [31534]: SEND FAILED: JOB 13346 DEST 555123123 ERR No carrier detected; too man
y attempts to dial
Dec 10 10:36:42.78: [31534]: <-- [5:ATH0\r]
Dec 10 10:36:43.01: [31534]: --> [2:OK]
Dec 10 10:36:43.01: [31534]: SESSION END
Note that :
Dec 10 10:35:29.72: [31534]: <-- [19:ATDT0,555123123#@\r]
Dec 10 10:36:42.78: [31534]: --> [10:NO CARRIER]
Hylafax wait about a minute before close connection with "NO CARRIER"
Why in this lapse hylafax fail connection with other side ?
Thanks :)On Dec 7, 2007 7:48 PM, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:YattaSpam wrote:It's probably the fault of the modem, but if you show us the session log
> I have a problem with hylafax 4.2, when it try to send a fax to a
> modem that responding without "whistle". In this case, Hylafax return
> "no carrier detect".
it would help me make that conclusion.
Lee.