Re: [hylafax-users] T38Modem - testing modems

["Jennifer Eyrich" <jce@xxxxxxxxxxx>]

Hello,

I did not change any off the config settings.

Here is the config.ttyx1 from etc/hylafax

# $Id: t38modem,v 1.2 2005/02/14 13:56:27 lhoward Exp $
#
# HylaFAX configuration for a T38FAX Pseudo Modem
#
# This file was originally sourced with permission from
# Vyacheslav Frolov's t38modem software in OpenH323 package.
#


#
CountryCode:		""
AreaCode:		""
FAXNumber:		""
LongDistancePrefix:	""
InternationalPrefix:	00
DialStringRules:	""
ServerTracing:		1
SessionTracing:		1
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	0
SpeakerVolume:		quiet
GettyArgs:		""
#

ModemType:		Class1		# use class 1 interface
ModemFlowControl:	rtscts		# default

ModemRevQueryCmd:	AT+FREV?

#
# If you're using a version earlier than 0.7.0 enable this.
#
#Class1FrameOverhead:	2		# does not include FCS

#
# AT#CID=10 enables ANI/DNIS reporting between the
# first and second RINGs in the form:
#
#   RING
#   NMBR = <calling number>
#   NDID = <called number>
#   RING
#
#ModemResetCmds:	"AT#CID=10"	# enable ANI/DNIS reporting
#RingsBeforeAnswer:	2		# collect info between two RINGs
#CallIDPattern:		"NMBR = "	# pattern string for calling number
#CallIDPattern:		"NDID = "	# pattern string for called number

#
# T.38 dial modifiers
#
# F - enable T.38 mode request after dialing
# V - disable T.38 mode request after dialing (remote host should do 
it)
#
# calling/called number dial modifiers
#
# L - reset and begin of calling number
# D - continue of called number
#
#ModemDialCmd:		ATDF%s		# user can override F by dial V
#ModemDialCmd:		ATDV%s		# user can override V by dial F
#ModemDialCmd:		ATD%sF		# user can't override F
#ModemDialCmd:		ATD%sV		# user can't override V
#ModemDialCmd:		ATD%sVL		# user can't override V or calling number


Thanks for your help.



Jennifer C. Eyrich |Network Administrator
Resnick Amsterdam Leshner, PC | 653 Skippack Pike, Suite 300 |Blue 
Bell, Pa 19422
Phone - 215.628.8080  x139 | Fax - 215.628.4752 |Website - 
www.ral-cpa.com

On Thu, 6 Dec 2007 22:20:37 +0100
 "Giulio Orsero" <giulioo@xxxxxxxxx> wrote:
 On Dec 6, 2007 10:04 PM, Jennifer Eyrich <jce@xxxxxxxxxxx> wrote:
> This is the command line
>
> t38modem -n -o /var/log/t38modem_trace.log -p ttyx0,ttyx1 --route 
> all@xxxxxxxxx > /var/log/t38modem.log 2>&1 </dev/null &
 
 In  the config.ttyx1 file, did you set
 RingsBeforeAnswer: 1     (or 2 or something different than 0)
 ?
 
 --
 giulioo@xxxxxxxxx
 
 
 ____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxx*
 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*