[hylafax-users] Syncronization Failure

["Fabiano (BiGu)" <bigu@xxxxxxxxxxxxxxxxxxxx>]

Hey Guys, Im getting the follow problem when try to send fax over 
iaxmodem device, im not using VoIP, I am using an PSTN LINE to make a 
transmission....

Dec 04 11:54:05.92: [ 8942]: SESSION BEGIN 000000941 +9132107433
Dec 04 11:54:05.92: [ 8942]: HylaFAX (tm) Version 5.1.7
Dec 04 11:54:05.92: [ 8942]: SEND FAX: JOB 166 DEST 09132107433 COMMID 
000000941 DEVICE '/dev/ttyIAX0' FROM 'root 
<root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx>' USER r
Dec 04 11:54:05.92: [ 8942]: <-- [12:AT+FCLASS=1\r]
Dec 04 11:54:05.92: [ 8942]: --> [2:OK]
Dec 04 11:54:05.92: [ 8942]: DIAL 09132107433
Dec 04 11:54:05.92: [ 8942]: <-- [16:ATDT09132107433\r]
Dec 04 11:54:17.22: [ 8942]: --> [7:CONNECT]
Dec 04 11:54:27.23: [ 8942]: <-- data [1]
Dec 04 11:54:27.24: [ 8942]: --> [2:OK]
Dec 04 11:54:27.24: [ 8942]: <-- [9:AT+FRS=7\r]
Dec 04 11:54:57.25: [ 8942]: MODEM <Timeout>
Dec 04 11:54:57.25: [ 8942]: Failure to receive silence (synchronization 
failure). {E100}
Dec 04 11:54:57.25: [ 8942]: <-- data [1]
Dec 04 11:54:57.26: [ 8942]: --> [2:OK]
Dec 04 11:54:57.26: [ 8942]: <-- [9:AT+FRH=3\r]
Dec 04 11:55:04.26: [ 8942]: --> [0:]
Dec 04 11:55:04.26: [ 8942]: MODEM <Empty line>
Dec 04 11:55:04.26: [ 8942]: <-- data [1]
Dec 04 11:55:04.28: [ 8942]: --> [2:OK]
Dec 04 11:55:04.28: [ 8942]: No receiver protocol (T.30 T1 timeout) {E126}
Dec 04 11:55:04.28: [ 8942]: SEND FAILED: JOB 166 DEST 09132107433 ERR 
No receiver protocol (T.30 T1 timeout) {E126}
Dec 04 11:55:04.28: [ 8942]: <-- [9:AT+FRS=7\r]
Dec 04 11:55:18.45: [ 8942]: --> [10:NO CARRIER]
Dec 04 11:55:18.45: [ 8942]: MODEM No carrier
Dec 04 11:55:18.45: [ 8942]: Failure to receive silence (synchronization 
failure). {E100}
Dec 04 11:55:18.45: [ 8942]: <-- [9:AT+FTH=3\r]
Dec 04 11:55:18.45: [ 8942]: --> [5:ERROR]
Dec 04 11:55:19.45: [ 8942]: <-- [5:ATH0\r]
Dec 04 11:55:19.55: [ 8942]: --> [2:OK]
Dec 04 11:55:19.55: [ 8942]: SESSION END


Using Hylafax 5.1.7 and iaxmomde 0.3.0

My config is:

CountryCode:            55
AreaCode:               99
FAXNumber:              +55.99.35253009
LongDistancePrefix:     0
InternationalPrefix:    0
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      0
SpeakerVolume:          off
PercentGoodLines:       90
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "HERINGER TAXI AEREO"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25

ModemType:              Class1          # use this to supply a hint
ModemResetCmds:         "ATH1\nAT+VCID=1"       # enables CallID display
ModemReadyCmds:         ATH0
Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT response
Class1RMQueryCmd:       "!24,48,72,96"  # V.17 fast-train recv doesn't 
workwell
lass1JBIGSupport:       no

JobReqBusy:             30     #requeue interval for BUSY dial result
JobReqDataConn:         30     #requeue interval for data connection 
dial result
JobReqNoAnswer:         30     #requeue interval for NO ANSWER dial result
JobReqNoCarrier:        30     #requeue interval for NO CARRIER dial result
JobReqNoFCon:           30     #requeue interval for carrier without 
+FCON dial result
JobReqOtherS2:          60     #requeue interval for ``other'' problems
JobReqProto:            60     #requeue interval after fax protocol error


JobRetryBusy:           3       #number of retries for BUSY dial result
JobRetryDataConn:       1       #number of retries for data connection 
dial result
JobRetryNoAnswer:       1       #number of retries for NO ANSWER dial result
JobRetryNoCarrier:      1       #number of retries for NO CARRIER dial 
result
JobRetryOther:          1       #number of retries for ``other'' problems
RingTimeout:            20000

Its another way to use modem over SIP, and not IAX Protocol?

Thanks for Help...


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*