Re: [hylafax-users] T38modem and Hylafax issues

["Jennifer Eyrich" <jce@xxxxxxxxxxx>]

The script that  you sent works wonderfully.

Here is the a part from the syslog, which looks fine

Nov 29 17:34:31 ralums FaxGetty[20651]: OPEN /dev/ttyx1  HylaFAX (tm) 
Version 4.4.0
Nov 29 17:34:39 ralums FaxGetty[20707]: OPEN /dev/ttyx0  HylaFAX (tm) 
Version 4.4.0
Nov 29 17:34:40 ralums FaxGetty[20651]: MODEM VYACHESLAV FROLOV 
T38FAX/0.8.0
Nov 29 17:34:49 ralums FaxGetty[20707]: MODEM VYACHESLAV FROLOV 
T38FAX/0.8.0

I sent another fax from the cli and this is what they syslog returned

Nov 29 17:47:06 ralums FaxSend[21219]: usage: faxsend -m deviceID [-t 
tracelevel] [-l] qfile

.


note;  faxgetty ttyx0, the command line did hang, when I ctrl+C, it 
closed the connection

Nov 29 17:45:41 ralums FaxGetty[20651]: CAUGHT SIGNAL 2
Nov 29 17:45:41 ralums FaxGetty[20651]: CLOSE /dev/ttyx1
Nov 29 17:46:05 ralums FaxGetty[20707]: CAUGHT SIGNAL 2
Nov 29 17:46:05 ralums FaxGetty[20707]: CLOSE /dev/ttyx0

Does this look fine so far?  I am only working with Linux/Ubuntu for a 
couple months now.  We are looking to migrate our infrastructure away 
from windows.   :)


Jennifer C. Eyrich |Network Administrator
Resnick Amsterdam Leshner, PC | 653 Skippack Pike, Suite 300 |Blue 
Bell, Pa 19422
Phone - 215.628.8080  x139 | Fax - 215.628.4752 |Website - 
www.ral-cpa.com

On Thu, 29 Nov 2007 16:40:55 -0500
 "Giulio Orsero" <giulioo@xxxxxxxxx> wrote:
 On Nov 29, 2007 9:59 PM, Jennifer Eyrich <jce@xxxxxxxxxxx> wrote:
> Thank you for the script.
>
> I am not sure how to send a fax via ttyx0 w/destiniation ttyx1.. 
> Sorry
 
 Kill any instance of t38modem that may be running
 Start t38modem with the command line you see in my preious email.
 Check that you have both /var/spool/hylafax/FIFO.ttyx0 and 
FIFO.ttyx1
 Check that you have both /var/spool/hylafax/etc/config.ttyx0 and
config.ttyx1
 Have faxgetty running on both ttyx0 and ttyx1
 sendfax -n -h ttyx0@ -d 0123 testfax
 it will be sent using ttyx0 and received on ttyx1
 Once this works you know for sure your local setup is ok, then you
can
 restart t38modem using the command line you need to use the media
 gateway.
 
 
> If I use two terminal windows, one for each connection and try it 
> that way, I get busy.  I have the route all@(gatewayIP).
 
 You don't need to use a terminal window for each connection, just a
 single terminal window to issue the above commands. Don't use "cu"
 while testing fax send/receive.
 
 
 --
 giulioo@xxxxxxxxx
 
 
 ____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxx*
 
 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*