Re: [hylafax-users] V.34 fax failure - is this a machine-specific problem? Running 1.0 - should I shut that off? [Fwd: facsimile job 3236 to 202-225-7313 failed]

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Karl Denninger wrote:

> Oct 19 09:39:46.77: [47783]: SEND send PPS (partial page signal)
> Oct 19 09:39:46.77: [47783]: SEND send MPS (more pages, same document)
> Oct 19 09:39:47.49: [47783]: SEND recv PPR (partial page request)
>  

> Oct 19 09:40:02.18: [47783]: SEND send PPS (partial page signal)
> Oct 19 09:40:02.18: [47783]: SEND send MPS (more pages, same document)
> Oct 19 09:40:02.91: [47783]: SEND recv PPR (partial page request)
>  

> Oct 19 09:40:15.02: [47783]: SEND send PPS (partial page signal)
> Oct 19 09:40:15.02: [47783]: SEND send MPS (more pages, same document)
> Oct 19 09:40:15.74: [47783]: SEND recv PPR (partial page request)
>  

> Oct 19 09:40:31.65: [47783]: EOT received (end of transmission)
> Oct 19 09:40:31.65: [47783]: Failed to properly open control V.34 channel.

Does this happen to every V.34-Fax-supporting receiver that you send 
to?  Does it work if you don't use V.34 (i.e., using 'sendfax -B 
14400')?  You're not using VoIP are you?

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*