[hylafax-users] No response to PPS repeat wth Conexant HSF softmodem

[Adrien DURAND <adurand@xxxxxxxxxxx>]

Hi,

I'm running Linux Ubuntu 6.06 (Kernel 2.6.15-26-server), using hylafax 
5.1.8-1 i386 and I'm having problems to send faxes. In fact, when using 
"virtual faxes" (no physical machine but a phone number to perform 
sending) it works fine, as well as "phonefax" (phone and fax with the 
same number). But when using a "normal" facsimile machine, results are 
unstable. Generally, the 3rd try performs well, but the preceding 
doesn't deliver the fax well and I'm getting a "No response to PPS 
repeat" error.

Any idea or advice will be welcome :) Thx.

Adrien.

Here are the logs :

oct 12 13:26:56.15: [27740]: SESSION BEGIN 000000010 00238392972
oct 12 13:26:56.15: [27740]: HylaFAX (tm) Version 5.1.8
oct 12 13:26:56.15: [27740]: SEND FAX: JOB 4 DEST 00238392972 COMMID 
000000010 D
EVICE '/dev/ttySHSF0' FROM 'root <root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx>' 
USER root
oct 12 13:26:56.15: [27740]: STATE CHANGE: RUNNING -> SENDING
oct 12 13:26:56.15: [27740]: <-- [14:AT+FCLASS=1.0\r]
oct 12 13:26:56.19: [27740]: --> [2:OK]
oct 12 13:26:56.19: [27740]: DIAL 00238392972
oct 12 13:26:56.19: [27740]: <-- [16:ATDT00238392972\r]
oct 12 13:27:18.15: [27740]: --> [7:CONNECT]
oct 12 13:27:19.29: [27740]: --> HDLC<25:FF C0 02 04 04 04 04 04 04 04 
04 04 04
04 04 04 04 04 04 04 04 04 04 A4 F3>
oct 12 13:27:19.37: [27740]: --> [2:OK]
oct 12 13:27:19.37: [27740]: REMOTE CSI ""
oct 12 13:27:19.37: [27740]: <-- [9:AT+FRH=3\r]
oct 12 13:27:19.41: [27740]: --> [7:CONNECT]
oct 12 13:27:19.69: [27740]: --> HDLC<14:FF C8 01 04 77 15 23 01 09 01 
01 18 D6
91>
oct 12 13:27:19.77: [27740]: --> [2:OK]
oct 12 13:27:19.77: [27740]: REMOTE best rate 33600 bit/s
oct 12 13:27:19.77: [27740]: REMOTE max A4 page width (215 mm)
oct 12 13:27:19.77: [27740]: REMOTE max unlimited page length
oct 12 13:27:19.77: [27740]: REMOTE best vres 7.7 line/mm
oct 12 13:27:19.77: [27740]: REMOTE format support: MH, MR, MMR, JPEG 
Full-Color
oct 12 13:27:19.77: [27740]: REMOTE supports T.30 Annex A, 256-byte ECM
oct 12 13:27:19.77: [27740]: REMOTE best 10 ms/scanline
oct 12 13:27:19.77: [27740]: USE 14400 bit/s
oct 12 13:27:19.77: [27740]: USE error correction mode
oct 12 13:27:19.77: [27740]: SEND file "docq/doc4.pdf;30"
oct 12 13:27:19.77: [27740]: USE A4 page width (215 mm)
oct 12 13:27:19.77: [27740]: USE unlimited page length
oct 12 13:27:19.77: [27740]: USE 3.85 line/mm
oct 12 13:27:19.77: [27740]: USE 2-D MMR
oct 12 13:27:19.77: [27740]: USE 0 ms/scanline
oct 12 13:27:19.77: [27740]: SEND training at v.17 14400 bit/s
oct 12 13:27:19.77: [27740]: <-- [9:AT+FRS=7\r]
oct 12 13:27:19.94: [27740]: --> [2:OK]
oct 12 13:27:19.94: [27740]: <-- [9:AT+FTH=3\r]
oct 12 13:27:20.26: [27740]: --> [7:CONNECT]
oct 12 13:27:20.26: [27740]: <-- HDLC<23:FF C0 C2 76 F6 4E 16 C6 76 9E 
CA FA 6E
96 2E 96 76 F6 C2 04 04 04 04>
oct 12 13:27:20.26: [27740]: <-- data [23]
oct 12 13:27:20.26: [27740]: <-- data [2]
oct 12 13:27:21.84: [27740]: --> [7:CONNECT]
oct 12 13:27:21.84: [27740]: <-- HDLC<7:FF C8 C1 00 44 1F 22>
oct 12 13:27:21.84: [27740]: <-- data [7]
oct 12 13:27:21.84: [27740]: <-- data [2]
oct 12 13:27:22.35: [27740]: --> [2:OK]
oct 12 13:27:22.35: [27740]: <-- [9:AT+FTS=7\r]
oct 12 13:27:22.51: [27740]: --> [2:OK]
oct 12 13:27:22.51: [27740]: <-- [11:AT+FTM=145\r]
oct 12 13:27:22.55: [27740]: --> [7:CONNECT]
oct 12 13:27:22.55: [27740]: <-- data [1024]
oct 12 13:27:22.55: [27740]: <-- data [1024]
oct 12 13:27:22.55: [27740]: <-- data [652]
oct 12 13:27:22.55: [27740]: <-- data [2]
oct 12 13:27:25.72: [27740]: --> [2:OK]
oct 12 13:27:25.72: [27740]: <-- [9:AT+FRH=3\r]
oct 12 13:27:26.02: [27740]: --> [7:CONNECT]
oct 12 13:27:27.22: [27740]: --> HDLC<5:FF C8 21 57 BE>
oct 12 13:27:27.28: [27740]: --> [2:OK]
oct 12 13:27:27.28: [27740]: TRAINING succeeded
oct 12 13:27:27.28: [27740]: SEND begin page
oct 12 13:27:27.28: [27740]: Reading MH-compressed image file
oct 12 13:27:27.32: [27740]: SEND EOFB
oct 12 13:27:27.32: [27740]: SEND send frame number 0
oct 12 13:27:27.32: [27740]: SEND send frame number 1
[... send frame conitnued ...]
oct 12 13:27:27.35: [27740]: SEND send frame number 158
oct 12 13:27:27.35: [27740]: SEND send frame number 159
oct 12 13:27:27.35: [27740]: <-- [9:AT+FRS=7\r]
oct 12 13:27:27.48: [27740]: --> [2:OK]
oct 12 13:27:27.48: [27740]: <-- [11:AT+FTM=146\r]
oct 12 13:27:27.80: [27740]: --> [7:CONNECT]
oct 12 13:27:27.80: [27740]: <-- data [1030]
oct 12 13:27:27.80: [27740]: <-- data [1035]
oct 12 13:27:27.80: [27740]: <-- data [1031]
oct 12 13:27:27.80: [27740]: <-- data [1034]
oct 12 13:27:27.81: [27740]: <-- data [1036]
oct 12 13:27:27.81: [27740]: <-- data [1035]
oct 12 13:27:27.81: [27740]: <-- data [1036]
oct 12 13:27:27.81: [27740]: <-- data [1034]
oct 12 13:27:28.73: [27740]: <-- data [1033]
oct 12 13:27:28.73: [27740]: <-- data [1040]
oct 12 13:27:29.90: [27740]: <-- data [1030]
oct 12 13:27:29.90: [27740]: <-- data [1032]
oct 12 13:27:29.90: [27740]: <-- data [1033]
oct 12 13:27:31.05: [27740]: <-- data [1029]
oct 12 13:27:31.05: [27740]: <-- data [1032]
oct 12 13:27:32.22: [27740]: <-- data [1032]
oct 12 13:27:32.22: [27740]: <-- data [1032]
oct 12 13:27:33.37: [27740]: <-- data [1030]
oct 12 13:27:33.37: [27740]: <-- data [1031]
oct 12 13:27:34.54: [27740]: <-- data [1031]
oct 12 13:27:34.54: [27740]: <-- data [1031]
oct 12 13:27:35.71: [27740]: <-- data [1040]
oct 12 13:27:35.71: [27740]: <-- data [1029]
oct 12 13:27:36.86: [27740]: <-- data [1029]
oct 12 13:27:36.86: [27740]: <-- data [1037]
oct 12 13:27:38.03: [27740]: <-- data [1039]
oct 12 13:27:38.03: [27740]: <-- data [1032]
oct 12 13:27:39.18: [27740]: <-- data [1035]
oct 12 13:27:39.18: [27740]: <-- data [1035]
oct 12 13:27:40.33: [27740]: <-- data [1034]
oct 12 13:27:40.33: [27740]: <-- data [1031]
oct 12 13:27:41.50: [27740]: <-- data [1034]
oct 12 13:27:41.50: [27740]: <-- data [1028]
oct 12 13:27:42.65: [27740]: <-- data [1035]
oct 12 13:27:42.65: [27740]: <-- data [1028]
oct 12 13:27:43.82: [27740]: <-- data [1035]
oct 12 13:27:43.82: [27740]: <-- data [1035]
oct 12 13:27:44.97: [27740]: <-- data [1036]
oct 12 13:27:44.97: [27740]: <-- data [1030]
oct 12 13:27:46.14: [27740]: <-- data [1037]
oct 12 13:27:46.14: [27740]: <-- data [1041]
oct 12 13:27:47.31: [27740]: <-- data [1006]
oct 12 13:27:47.31: [27740]: <-- data [2]
oct 12 13:27:52.12: [27740]: --> [2:OK]
oct 12 13:27:52.12: [27740]: <-- [9:AT+FTS=9\r]
oct 12 13:27:52.32: [27740]: --> [2:OK]
oct 12 13:27:52.32: [27740]: <-- [9:AT+FTH=3\r]
oct 12 13:27:52.38: [27740]: --> [7:CONNECT]
oct 12 13:27:52.38: [27740]: <-- HDLC<7:FF C8 FD F4 00 00 F9>
oct 12 13:27:52.38: [27740]: <-- data [7]
oct 12 13:27:52.38: [27740]: <-- data [2]
oct 12 13:27:53.81: [27740]: --> [2:OK]
oct 12 13:27:53.81: [27740]: SEND send PPS (partial page signal)
oct 12 13:27:53.81: [27740]: SEND send EOP (no more pages or documents)
oct 12 13:27:53.81: [27740]: <-- [9:AT+FRH=3\r]
oct 12 13:27:53.98: [27740]: --> [7:CONNECT]
oct 12 13:27:54.10: [27740]: --> [2:10 03]
oct 12 13:27:54.10: [27740]: --> [5:ERROR]
oct 12 13:27:54.10: [27740]: MODEM Command error
oct 12 13:27:54.10: [27740]: FCS error
oct 12 13:27:54.10: [27740]: <-- [9:AT+FTH=3\r]
oct 12 13:27:55.92: [27740]: --> [7:CONNECT]
oct 12 13:27:55.92: [27740]: <-- HDLC<7:FF C8 FD F4 00 00 F9>
oct 12 13:27:55.92: [27740]: <-- data [7]
oct 12 13:27:55.92: [27740]: <-- data [2]
oct 12 13:27:57.31: [27740]: --> [2:OK]
oct 12 13:27:57.31: [27740]: SEND send PPS (partial page signal)
oct 12 13:27:57.31: [27740]: SEND send EOP (no more pages or documents)
oct 12 13:27:57.31: [27740]: <-- [9:AT+FRH=3\r]
oct 12 13:27:57.48: [27740]: --> [7:CONNECT]
oct 12 13:27:57.62: [27740]: --> [2:10 03]
oct 12 13:27:57.62: [27740]: --> [5:ERROR]
oct 12 13:27:57.62: [27740]: MODEM Command error
oct 12 13:27:57.62: [27740]: FCS error
oct 12 13:27:57.62: [27740]: <-- [9:AT+FTH=3\r]
oct 12 13:27:59.24: [27740]: --> [7:CONNECT]
oct 12 13:27:59.24: [27740]: <-- HDLC<7:FF C8 FD F4 00 00 F9>
oct 12 13:27:59.24: [27740]: <-- data [7]
oct 12 13:27:59.24: [27740]: <-- data [2]
oct 12 13:28:00.64: [27740]: --> [2:OK]
oct 12 13:28:00.64: [27740]: SEND send PPS (partial page signal)
oct 12 13:28:00.64: [27740]: SEND send EOP (no more pages or documents)
oct 12 13:28:00.64: [27740]: <-- [9:AT+FRH=3\r]
oct 12 13:28:00.81: [27740]: --> [7:CONNECT]
oct 12 13:28:00.93: [27740]: --> [2:10 03]
oct 12 13:28:00.93: [27740]: --> [5:ERROR]
oct 12 13:28:00.93: [27740]: MODEM Command error
oct 12 13:28:00.93: [27740]: FCS error
oct 12 13:28:00.93: [27740]: No response to PPS repeated 3 times. {E147}
oct 12 13:28:00.93: [27740]: SEND end page
oct 12 13:28:00.93: [27740]: SEND: No response to PPS repeated 3 times. 
{E147};
Giving up after 3 attempts to send same page "docq/doc4.pdf;30", dirnum 0
oct 12 13:28:00.93: [27740]: <-- [9:AT+FRS=7\r]
oct 12 13:28:02.38: [27740]: --> [2:OK]
oct 12 13:28:02.38: [27740]: <-- [9:AT+FTH=3\r]
oct 12 13:28:02.70: [27740]: --> [7:CONNECT]
oct 12 13:28:02.70: [27740]: <-- HDLC<3:FF C8 DF>
oct 12 13:28:02.70: [27740]: <-- data [3]
oct 12 13:28:02.70: [27740]: <-- data [2]
oct 12 13:28:03.99: [27740]: --> [2:OK]
oct 12 13:28:03.99: [27740]: MODEM input buffering enabled
oct 12 13:28:05.00: [27740]: <-- [5:ATH0\r]
oct 12 13:28:05.16: [27740]: --> [2:OK]
oct 12 13:28:05.16: [27740]: MODEM set DTR OFF
oct 12 13:28:05.16: [27740]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
oct 12 13:28:05.16: [27740]: SESSION END

begin:vcard
fn:Adrien DURAND
n:DURAND;Adrien
org;quoted-printable:Conitiv Synchron;D=C3=A9veloppement
adr;quoted-printable;quoted-printable;quoted-printable:6 all=C3=A9e Pelletier Doisy;;Technop=C3=B4le de Nancy Brabois;VILLERS L=C3=88S NANCY;;54500;FRANCE
email;internet:adurand@xxxxxxxxxxx
title;quoted-printable:Ing=C3=A9nieur Cadre sp=C3=A9cialis=C3=A9 Traitement Automatique de la=
	 Langue
tel;work:+33 (0)3 83 61 44 74
tel;fax:+33 (0)3 83 40 38 75
tel;cell:+33 (0)6 64 98 70 99
x-mozilla-html:TRUE
url:http://www.conitiv-synchron.com/
version:2.1
end:vcard