Re: [hylafax-users] Brooktrout TR114. Is it necessary to use Hyla-fax Enterprice version?

["Claus Kvolsgaard Jensen. Frode Laursen A/S" <cjens@xxxxxxxxxxxxxxxxx>]

Lee Howard wrote:
> Claus Kvolsgaard Jensen. Frode Laursen A/S wrote:
>
> > I am running a Hylafax server 4.4.2 on a SUSE Enterprise 9.0 server.
> >
> > Today I am using 6 Lasat safire 560 class 1 modems, and that works fine.
> >
> > However I would like to upgrade the modems to a Brooktrout TR114 4 
> > channel ISDN card (PCI) and use 2 ISDN2 lines with 3 or 4 numbers on 
> > each line and then use DID to route faxes.
> >
> > My problem is just that i can't find out how to install the TR114 via 
> > faxaddmodem.
> >
> > I did search the net but i allways end up with sites where I have to 
> > buy the HYLA-fax Enterprise version for 995$. Acording to them that 
> > should support Brooktrout TR114 and TR3104...
> >
> > Is there no other way??
>
>
> Brooktrout's TR114 has a proprietary interface, one that requires usage 
> of the Brooktrout API.  The open-source versions of HylaFAX do not 
> support that proprietary API.
>
> There are ISDN alternatives to the TR114 that will use standard 
> interfaces for HylaFAX.  Search through the mailing list archives, and 
> you'll find them.
>
> Thanks,
>
> Lee.

Thanks Lee.

So this mean the only way to use my existing brokktrout card is to buy a 
Hylafax enterprice version.

Do I understand you right?

Regards

/KvolsgaarD


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*