Re: [hylafax-users] Best modem parameters

[John Hudak <john.j.hudak@xxxxxxxxxxx>]

I forgot to mention that setting S9 may help...It sets the carrier 
detect response time.  Its values range from 1-255  TENTHS of a second.  
Its value represents the time that is allowed for a signal that is 
detected to when it is qualified as a valid carrier.  The default time 
is 0.6 seconds. 
Good luck
-John

> Hi , guys
>
>
> This is the first time  I 'm working with hylafax !
>
>  I have a little problem to solve :  I have configured my hylafax to 
> broadcast a fax to multiple destinations , but  there are too many 
> attemps  failed  to good numbers ( verified ) .  Looking on  logs , I 
> understand  that my modems place the call and wait for a short  period 
> of time the response from the remotes ; if  it not receive any  
> response  close the call and start again the operation . I verify that 
> there are a lot of remote modems which have a time delay to respond to 
> an incoming call  that no respect the time delay of  my modems .   ( I 
> think  that this is the real problem ! )
>
>  Is there a a configuration parameter to mdify the time delay a modem 
> wait to a response after placing a call ?
>
>  I' m sorry for my English
>
> Thanks in advance
>
>
> Regards
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*