Re: [hylafax-users] Problem with a new installation

["Ken Keefe" <kjkeefe@xxxxxxxxx>]

On 9/19/07, David Mimms <david.mimms@xxxxxxxx> wrote:
>
> The HylaFAX logs can be found in either /var/spool/hylafax/log or /
> var/spool/fax/log.
>
> Also, hsfmodems are not very reliable.
>
> David

The modem will be replaced once I have demonstrated a working
solution. Would the hsfmodem cause this type of problem? Regardless, I
have no intention of using this hsfmodem in production...

Here's what I found in /var/spool/hylafax/log (sorry it is so long):

# cat /var/spool/hylafax/log/c000000036
Sep 19 10:49:19.48: [12633]: SESSION BEGIN 000000036 1217912177282032
Sep 19 10:49:19.48: [12633]: HylaFAX (tm) Version 4.3.1
Sep 19 10:49:19.48: [12633]: SEND FAX: JOB 11 DEST 912177282032 COMMID
000000036 DEVICE '/dev/modem' FROM 'Ken Keefe <kjkeefe@xxxxxxxxx>'
USER root
Sep 19 10:49:19.48: [12633]: <-- [12:AT+FCLASS=1\r]
Sep 19 10:49:19.51: [12633]: --> [2:OK]
Sep 19 10:49:19.51: [12633]: DIAL 912177282032
Sep 19 10:49:19.51: [12633]: <-- [17:ATDT912177282032\r]
Sep 19 10:49:32.08: [12633]: --> [7:CONNECT]
Sep 19 10:49:33.26: [12633]: --> [2:OK]
Sep 19 10:49:33.26: [12633]: REMOTE NSF "00 00 25 00 00 00 12 50 6D 02
00 58 00 28 00 A4 80 80 11"
Sep 19 10:49:33.26: [12633]: NSF remote fax equipment: Ricoh
Sep 19 10:49:33.26: [12633]: <-- [9:AT+FRH=3\r]
Sep 19 10:49:33.29: [12633]: --> [7:CONNECT]
Sep 19 10:49:33.61: [12633]: --> [2:OK]
Sep 19 10:49:33.61: [12633]: REMOTE best rate 33600 bit/s
Sep 19 10:49:33.61: [12633]: REMOTE max A4 page width (215 mm)
Sep 19 10:49:33.61: [12633]: REMOTE max unlimited page length
Sep 19 10:49:33.61: [12633]: REMOTE best vres 200 x 200 dpi
Sep 19 10:49:33.61: [12633]: REMOTE format support: MH, MR, MMR
Sep 19 10:49:33.61: [12633]: REMOTE supports T.30 Annex A, 256-byte ECM
Sep 19 10:49:33.61: [12633]: REMOTE best 10 ms, 5 ms/scanline
Sep 19 10:49:33.61: [12633]: USE 14400 bit/s
Sep 19 10:49:33.61: [12633]: USE error correction mode
Sep 19 10:49:33.61: [12633]: SEND file "docq/cover11;c0"
Sep 19 10:49:33.61: [12633]: USE A4 page width (215 mm)
Sep 19 10:49:33.61: [12633]: USE unlimited page length
Sep 19 10:49:33.61: [12633]: USE 3.85 line/mm
Sep 19 10:49:33.61: [12633]: USE 2-D MMR
Sep 19 10:49:33.61: [12633]: USE 0 ms/scanline
Sep 19 10:49:33.61: [12633]: SEND training at v.17 14400 bit/s
Sep 19 10:49:33.61: [12633]: <-- [9:AT+FRS=7\r]
Sep 19 10:49:33.80: [12633]: --> [2:OK]
Sep 19 10:49:33.80: [12633]: <-- [9:AT+FTH=3\r]
Sep 19 10:49:34.11: [12633]: --> [7:CONNECT]
Sep 19 10:49:34.11: [12633]: <-- data [23]
Sep 19 10:49:34.11: [12633]: <-- data [2]
Sep 19 10:49:35.69: [12633]: --> [7:CONNECT]
Sep 19 10:49:35.69: [12633]: <-- data [7]
Sep 19 10:49:35.69: [12633]: <-- data [2]
Sep 19 10:49:36.20: [12633]: --> [2:OK]
Sep 19 10:49:36.20: [12633]: <-- [9:AT+FTS=7\r]
Sep 19 10:49:36.35: [12633]: --> [2:OK]
Sep 19 10:49:36.35: [12633]: <-- [11:AT+FTM=145\r]
Sep 19 10:49:36.38: [12633]: --> [7:CONNECT]
Sep 19 10:49:36.38: [12633]: <-- data [1024]
Sep 19 10:49:36.38: [12633]: <-- data [1024]
Sep 19 10:49:36.38: [12633]: <-- data [652]
Sep 19 10:49:36.38: [12633]: <-- data [2]
Sep 19 10:49:39.54: [12633]: --> [2:OK]
Sep 19 10:49:39.54: [12633]: <-- [9:AT+FRH=3\r]
Sep 19 10:49:40.48: [12633]: --> [7:CONNECT]
Sep 19 10:49:41.68: [12633]: --> [2:OK]
Sep 19 10:49:41.68: [12633]: TRAINING succeeded
Sep 19 10:49:41.68: [12633]: SEND begin page
Sep 19 10:49:41.69: [12633]: SEND EOFB
Sep 19 10:49:41.69: [12633]: SEND send frame number 0
Sep 19 10:49:41.69: [12633]: SEND send frame number 1
Sep 19 10:49:41.69: [12633]: SEND send frame number 2
Sep 19 10:49:41.69: [12633]: SEND send frame number 3
Sep 19 10:49:41.69: [12633]: SEND send frame number 4
Sep 19 10:49:41.69: [12633]: SEND send frame number 5
Sep 19 10:49:41.69: [12633]: SEND send frame number 6
Sep 19 10:49:41.69: [12633]: SEND send frame number 7
Sep 19 10:49:41.69: [12633]: SEND send frame number 8
Sep 19 10:49:41.69: [12633]: SEND send frame number 9
Sep 19 10:49:41.70: [12633]: SEND send frame number 10
Sep 19 10:49:41.70: [12633]: SEND send frame number 11
Sep 19 10:49:41.70: [12633]: SEND send frame number 12
Sep 19 10:49:41.70: [12633]: SEND send frame number 13
Sep 19 10:49:41.70: [12633]: SEND send frame number 14
Sep 19 10:49:41.70: [12633]: SEND send frame number 15
Sep 19 10:49:41.70: [12633]: <-- [9:AT+FRS=7\r]
Sep 19 10:49:41.89: [12633]: --> [2:OK]
Sep 19 10:49:41.89: [12633]: <-- [11:AT+FTM=146\r]
Sep 19 10:49:42.20: [12633]: --> [7:CONNECT]
Sep 19 10:49:42.20: [12633]: <-- data [1031]
Sep 19 10:49:42.20: [12633]: <-- data [1039]
Sep 19 10:49:42.20: [12633]: <-- data [1045]
Sep 19 10:49:42.20: [12633]: <-- data [1038]
Sep 19 10:49:42.20: [12633]: <-- data [585]
Sep 19 10:49:42.20: [12633]: <-- data [2]
Sep 19 10:49:45.23: [12633]: --> [2:OK]
Sep 19 10:49:45.23: [12633]: <-- [9:AT+FTS=7\r]
Sep 19 10:49:45.40: [12633]: --> [2:OK]
Sep 19 10:49:45.40: [12633]: <-- [9:AT+FTH=3\r]
Sep 19 10:49:45.43: [12633]: --> [7:CONNECT]
Sep 19 10:49:45.43: [12633]: <-- data [7]
Sep 19 10:49:45.43: [12633]: <-- data [2]
Sep 19 10:49:46.81: [12633]: --> [2:OK]
Sep 19 10:49:46.81: [12633]: SEND send PPS (partial page signal)
Sep 19 10:49:46.81: [12633]: SEND send MPS (more pages, same document)
Sep 19 10:49:46.81: [12633]: <-- [9:AT+FRH=3\r]
Sep 19 10:49:46.96: [12633]: --> [7:CONNECT]
Sep 19 10:49:47.28: [12633]: --> [5:ERROR]
Sep 19 10:49:47.28: [12633]: MODEM Command error
Sep 19 10:49:47.28: [12633]: FCS error
Sep 19 10:49:47.28: [12633]: <-- [9:AT+FRS=7\r]
Sep 19 10:49:47.42: [12633]: --> [2:OK]
Sep 19 10:49:47.42: [12633]: <-- [9:AT+FTH=3\r]
Sep 19 10:49:49.06: [12633]: --> [7:CONNECT]
Sep 19 10:49:49.06: [12633]: <-- data [3]
Sep 19 10:49:49.06: [12633]: <-- data [2]
Sep 19 10:49:50.35: [12633]: --> [2:OK]
Sep 19 10:49:50.35: [12633]: SEND send CRP (command repeat)
Sep 19 10:49:50.35: [12633]: <-- [9:AT+FRH=3\r]
Sep 19 10:49:50.50: [12633]: --> [7:CONNECT]
Sep 19 10:49:50.82: [12633]: --> [5:ERROR]
Sep 19 10:49:50.82: [12633]: MODEM Command error
Sep 19 10:49:50.82: [12633]: FCS error
Sep 19 10:49:50.82: [12633]: <-- [9:AT+FRS=7\r]
Sep 19 10:49:50.96: [12633]: --> [2:OK]
Sep 19 10:49:50.96: [12633]: <-- [9:AT+FTH=3\r]
Sep 19 10:49:52.52: [12633]: --> [7:CONNECT]
Sep 19 10:49:52.52: [12633]: <-- data [3]
Sep 19 10:49:52.52: [12633]: <-- data [2]
Sep 19 10:49:53.81: [12633]: --> [2:OK]
Sep 19 10:49:53.81: [12633]: SEND send CRP (command repeat)
Sep 19 10:49:53.81: [12633]: <-- [9:AT+FRH=3\r]
Sep 19 10:49:56.92: [12633]: --> [0:]
Sep 19 10:49:56.92: [12633]: MODEM <Empty line>
Sep 19 10:49:56.92: [12633]: <-- data [1]
Sep 19 10:49:57.12: [12633]: MODEM <Timeout>
Sep 19 10:49:57.12: [12633]: <-- [9:AT+FTH=3\r]
Sep 19 10:49:57.43: [12633]: --> [7:CONNECT]
Sep 19 10:49:57.43: [12633]: <-- data [7]
Sep 19 10:49:57.43: [12633]: <-- data [2]
Sep 19 10:49:58.83: [12633]: --> [2:OK]
Sep 19 10:49:58.83: [12633]: SEND send PPS (partial page signal)
Sep 19 10:49:58.83: [12633]: SEND send MPS (more pages, same document)
Sep 19 10:49:58.83: [12633]: <-- [9:AT+FRH=3\r]
Sep 19 10:50:01.93: [12633]: --> [0:]
Sep 19 10:50:01.93: [12633]: MODEM <Empty line>
Sep 19 10:50:01.93: [12633]: <-- data [1]
Sep 19 10:50:02.14: [12633]: MODEM <Timeout>
Sep 19 10:50:02.14: [12633]: <-- [9:AT+FTH=3\r]
Sep 19 10:50:02.45: [12633]: --> [7:CONNECT]
Sep 19 10:50:02.45: [12633]: <-- data [7]
Sep 19 10:50:02.45: [12633]: <-- data [2]
Sep 19 10:50:03.85: [12633]: --> [2:OK]
Sep 19 10:50:03.85: [12633]: SEND send PPS (partial page signal)
Sep 19 10:50:03.85: [12633]: SEND send MPS (more pages, same document)
Sep 19 10:50:03.85: [12633]: <-- [9:AT+FRH=3\r]
Sep 19 10:50:06.95: [12633]: --> [0:]
Sep 19 10:50:06.95: [12633]: MODEM <Empty line>
Sep 19 10:50:06.95: [12633]: <-- data [1]
Sep 19 10:50:07.15: [12633]: MODEM <Timeout>
Sep 19 10:50:07.15: [12633]: No response to PPS repeated 3 times.
Sep 19 10:50:07.15: [12633]: SEND end page
Sep 19 10:50:07.15: [12633]: <-- [9:AT+FTH=3\r]
Sep 19 10:50:07.46: [12633]: --> [7:CONNECT]
Sep 19 10:50:07.46: [12633]: <-- data [3]
Sep 19 10:50:07.46: [12633]: <-- data [2]
Sep 19 10:50:08.75: [12633]: --> [2:OK]
Sep 19 10:50:08.75: [12633]: <-- [5:ATH0\r]
Sep 19 10:50:08.89: [12633]: --> [2:OK]
Sep 19 10:50:08.89: [12633]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*