Re: [hylafax-users] ERR No receiver protocol (T.30 T1 timeout)

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Jan,

Many years ago we had a product family based on the Conexant SmartACF
chipset.  We sold vast quantities for use in the data market but never sold
it for fax because it was not reliable enough for our customers.

I'd suggest that you get a modem based on the Agere Venus chipset, or for
the very latest and greatest a LSI (Agere) CFAX34 chipset.

Regards

ANDREW RINALDI
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Jan Kalcic
Sent: 31 August 2007 06:30
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] ERR No receiver protocol (T.30 T1 timeout)

Hi All,

anyone experienced problems with external modem fax Hamlet HV92KX2?

The error in subject is driving me crazy. I can't find any solution and
I'm about to start to think it's a modem issue. The config.ttyS0 is the
following:

#CountryCode:            ""
#AreaCode:               ""
FAXNumber:              0000000000
#LongDistancePrefix:     ""
#InternationalPrefix:    ""
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          "off"
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Tecnocasa - Studio Carate"
LogFacility:            local0
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier
(or not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
# #######################################
# "X3" addes to avoid "No local dialtone" error #
########################################
ModemDialCmd:           ATX3DT%s                # T for tone dialing


Here the log:

Aug 31 15:21:18 plutone FaxQueuer[4258]: SUBMIT JOB 29
Aug 31 15:21:18 plutone FaxQueuer[4258]: JOB 29 (suspended dest  pri 127
tts 0:00 killtime 2:59:00): CREATE
Aug 31 15:21:18 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:59:00): READY
Aug 31 15:21:18 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:59:00): PROCESS
Aug 31 15:21:18 plutone HylaFAX[5202]: <--- 200 Job 29 submitted.
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 27 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 24 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 25 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 26 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): PREPARE START
Aug 31 15:21:19 plutone FaxQueuer[5207]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): CONVERT DOCUMENT:
bin/ps2fax -o docq/doc35.ps;c1 -r 196 -w 1728 -l 297 -m 4294967295 -U -3
docq/doc35.ps.29
Aug 31 15:21:19 plutone FaxQueuer[4258]: NOTIFY exit status: 0177400 (5205)
Aug 31 15:21:19 plutone FaxGetty[4736]: LOCKWAIT
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): PREPARE DONE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 27 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:48:48): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 24 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:41:32): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 25 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:44:49): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 26 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:45:42): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): CMD START
/usr/sbin/faxsend -m ttyS0 sendq/q29 sendq/q27 sendq/q24 sendq/q25
sendq/q26 (PID 5214)
Aug 31 15:21:29 plutone FaxSend[5214]: MODEM ROCKWELL
RC288DPi/ACF3_V1.702-V90_P21_FSH
Aug 31 15:21:29 plutone FaxSend[5214]: SEND FAX: JOB 29 DEST 00000000000
COMMID 000000054 DEVICE '/dev/ttyS0' FROM 'root <root@xxxxxxxxxxxx>'
USER root
Aug 31 15:22:30 plutone FaxSend[5214]: SEND FAILED: JOB 29 DEST
00000000000 ERR No receiver protocol (T.30 T1 timeout) {E126}
Aug 31 15:22:34 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:57:44): CMD DONE: exit status 0
Aug 31 15:22:34 plutone FaxQueuer[4258]: JOB 29 (sleeping dest
+00000000000 pri 126 tts 0:00 killtime 2:57:44): SEND INCOMPLETE:
requeue for 0:56; No receiver protocol (T.30 T1 timeout)
Aug 31 15:22:34 plutone FaxQueuer[4258]: JOB 29 (sleeping dest
+00000000000 pri 126 tts 0:56 killtime 2:57:44): SLEEP FOR 0:56


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*