HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] ERR Remote has no T.4 receiver capability

alex@xxxxxxxxxxxx wrote:

Jul 01 20:51:54.08: [24556]: <-- [9:AT+FRH=3\r]
Jul 01 20:51:54.09: [24556]: --> [7:CONNECT]
Jul 01 20:51:54.50: [24556]: --> [2:OK]
Jul 01 20:51:54.50: [24556]: Remote has no T.4 receiver capability



I really need you to set SessionTracing to 0xFFF, retry the fax, and
then send me the resulting log.  Either the receiver really does not
have receiving capability, or the DIS signal is being mis-interpreted.
I can't see the DIS signal with the lower SessionTracing level that you
currently have in use.

Well, not surprisingly (given how much computers love to confound us all), this thing actually sent properly once I turned SessionTracing to 0xFFF as requested above. Thanks anyway for your help; I'll paste the output of that log below, in case it's relevant for finding any kind of niggling bug.

Meanwhile, since I have a couple of other issues related to this fax campaign, but which are distinct errors, I'll start those one at a time in different threads (as that seems to be the most polite way to go).

Thanks,
Alex Kirk

Output:

Jul 02 13:45:22.40: [ 8564]: SESSION BEGIN 000003369 17037012022255652
Jul 02 13:45:22.40: [ 8564]: HylaFAX (tm) Version 4.3.0
Jul 02 13:45:22.40: [ 8564]: SEND FAX: JOB 1907 DEST *701-202-225-5652 COMMID 000003369 DEVICE '/dev/ttyS0' FROM 'alex <alex@xxxxxxxxxxxx>' USER alex
Jul 02 13:45:22.40: [ 8564]: STATE CHANGE: RUNNING -> SENDING
Jul 02 13:45:22.40: [ 8564]: <-- [12:AT+FCLASS=1\r]
Jul 02 13:45:22.54: [ 8564]: --> [2:OK]
Jul 02 13:45:22.54: [ 8564]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Jul 02 13:45:22.54: [ 8564]: DIAL *7012022255652
Jul 02 13:45:22.54: [ 8564]: <-- [19:ATDT*7012022255652\r]
Jul 02 13:45:45.85: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:47.63: [ 8564]: --> HDLC<38:FF C0 04 00 00 88 01 00 51 92 08 AA 74 CA 74 04 4A A2 0A 74 04 D2 82 2A 12 9A 04 00 CA 00 01 01 01 30 80 40 3D D5>
Jul 02 13:45:47.63: [ 8564]: --> [2:OK]
Jul 02 13:45:47.63: [ 8564]: REMOTE NSF "00 00 11 80 00 8A 49 10 55 2E 53 2E 20 52 45 50 2E 20 4B 41 54 48 59 20 00 53 00 80 80 80 0C 01 02"
Jul 02 13:45:47.63: [ 8564]: NSF remote fax equipment: Canon Laser Class 9000 Series
Jul 02 13:45:47.63: [ 8564]: NSF remote station ID: "U.S. REP. KATHY "
Jul 02 13:45:47.63: [ 8564]: <-- [9:AT+FRH=3\r]
Jul 02 13:45:47.64: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:48.31: [ 8564]: --> HDLC<25:FF C0 02 4C AC 6C AC 04 AC 4C 4C 04 4C 0C 4C 04 04 04 04 04 04 04 04 D7 74>
Jul 02 13:45:48.31: [ 8564]: --> [2:OK]
Jul 02 13:45:48.31: [ 8564]: REMOTE CSI "202 225 5652"
Jul 02 13:45:48.31: [ 8564]: <-- [9:AT+FRH=3\r]
Jul 02 13:45:48.33: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:48.77: [ 8564]: --> HDLC<15:FF C8 01 04 77 15 23 01 A9 01 01 01 1C 64 86>
Jul 02 13:45:48.77: [ 8564]: --> [2:OK]
Jul 02 13:45:48.77: [ 8564]: REMOTE best rate 33600 bit/s
Jul 02 13:45:48.77: [ 8564]: REMOTE max A4 page width (215 mm)
Jul 02 13:45:48.77: [ 8564]: REMOTE max unlimited page length
Jul 02 13:45:48.77: [ 8564]: REMOTE best vres R16 x 15.4 line/mm
Jul 02 13:45:48.77: [ 8564]: REMOTE format support: MH, MR, MMR, JBIG
Jul 02 13:45:48.77: [ 8564]: REMOTE supports T.30 Annex A, 256-byte ECM
Jul 02 13:45:48.77: [ 8564]: REMOTE best 10 ms/scanline
Jul 02 13:45:48.77: [ 8564]: USE 14400 bit/s
Jul 02 13:45:48.77: [ 8564]: USE error correction mode
Jul 02 13:45:48.77: [ 8564]: SEND file "docq/doc1934.pdf;31"
Jul 02 13:45:48.77: [ 8564]: USE A4 page width (215 mm)
Jul 02 13:45:48.77: [ 8564]: USE unlimited page length
Jul 02 13:45:48.77: [ 8564]: USE 7.7 line/mm
Jul 02 13:45:48.77: [ 8564]: USE 2-D MMR
Jul 02 13:45:48.77: [ 8564]: USE 0 ms/scanline
Jul 02 13:45:48.77: [ 8564]: SEND training at v.17 14400 bit/s
Jul 02 13:45:48.77: [ 8564]: DELAY 70 ms
Jul 02 13:45:48.84: [ 8564]: <-- [9:AT+FTH=3\r]
Jul 02 13:45:49.03: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:49.03: [ 8564]: <-- HDLC<23:FF C0 C2 2C 8C 4C 6C 74 1C EC EC 74 CC 0C EC 04 04 04 04 04 04 04 04>
Jul 02 13:45:49.03: [ 8564]: <-- data [23]
Jul 02 13:45:49.03: [ 8564]: <-- data [2]
Jul 02 13:45:49.06: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:49.06: [ 8564]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
Jul 02 13:45:49.06: [ 8564]: <-- data [7]
Jul 02 13:45:49.06: [ 8564]: <-- data [2]
Jul 02 13:45:51.04: [ 8564]: --> [2:OK]
Jul 02 13:45:51.04: [ 8564]: <-- [9:AT+FTS=7\r]
Jul 02 13:45:51.12: [ 8564]: --> [2:OK]
Jul 02 13:45:51.12: [ 8564]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Jul 02 13:45:51.12: [ 8564]: <-- [11:AT+FTM=145\r]
Jul 02 13:45:52.60: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:52.60: [ 8564]: <-- data [1024]
Jul 02 13:45:52.60: [ 8564]: <-- data [1024]
Jul 02 13:45:52.60: [ 8564]: <-- data [652]
Jul 02 13:45:52.60: [ 8564]: <-- data [2]
Jul 02 13:45:54.13: [ 8564]: --> [2:OK]
Jul 02 13:45:54.13: [ 8564]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Jul 02 13:45:54.13: [ 8564]: <-- [9:AT+FRS=1\r]
Jul 02 13:45:54.15: [ 8564]: --> [2:OK]
Jul 02 13:45:54.15: [ 8564]: <-- [9:AT+FRH=3\r]
Jul 02 13:45:54.65: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:55.78: [ 8564]: --> HDLC<5:FF C8 21 57 BE>
Jul 02 13:45:55.78: [ 8564]: --> [2:OK]
Jul 02 13:45:55.78: [ 8564]: TRAINING succeeded
Jul 02 13:45:55.78: [ 8564]: SEND begin page
Jul 02 13:45:55.78: [ 8564]: Reading MH-compressed image file
Jul 02 13:45:55.82: [ 8564]: SEND EOFB
Jul 02 13:45:55.82: [ 8564]: SEND send frame number 0
...<trimmed frames for readability>...
Jul 02 13:45:55.83: [ 8564]: SEND send frame number 109
Jul 02 13:45:55.83: [ 8564]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Jul 02 13:45:55.83: [ 8564]: DELAY 200 ms
Jul 02 13:45:56.03: [ 8564]: <-- [11:AT+FTM=146\r]
Jul 02 13:45:56.29: [ 8564]: --> [7:CONNECT]
Jul 02 13:45:56.29: [ 8564]: <-- data [1028]
Jul 02 13:45:56.29: [ 8564]: <-- data [1028]
Jul 02 13:45:56.29: [ 8564]: <-- data [1032]
Jul 02 13:45:56.29: [ 8564]: <-- data [1032]
Jul 02 13:45:58.28: [ 8564]: <-- data [1031]
Jul 02 13:45:58.28: [ 8564]: <-- data [1031]
Jul 02 13:45:58.28: [ 8564]: <-- data [1032]
Jul 02 13:45:58.28: [ 8564]: <-- data [1031]
Jul 02 13:46:00.28: [ 8564]: <-- data [1027]
Jul 02 13:46:00.28: [ 8564]: <-- data [1034]
Jul 02 13:46:00.28: [ 8564]: <-- data [1028]
Jul 02 13:46:00.28: [ 8564]: <-- data [1029]
Jul 02 13:46:02.28: [ 8564]: <-- data [1033]
Jul 02 13:46:02.28: [ 8564]: <-- data [1028]
Jul 02 13:46:02.28: [ 8564]: <-- data [1029]
Jul 02 13:46:02.28: [ 8564]: <-- data [1041]
Jul 02 13:46:04.27: [ 8564]: <-- data [1032]
Jul 02 13:46:04.27: [ 8564]: <-- data [1027]
Jul 02 13:46:04.27: [ 8564]: <-- data [1030]
Jul 02 13:46:06.27: [ 8564]: <-- data [1028]
Jul 02 13:46:06.27: [ 8564]: <-- data [1035]
Jul 02 13:46:06.27: [ 8564]: <-- data [1030]
Jul 02 13:46:06.27: [ 8564]: <-- data [1028]
Jul 02 13:46:08.27: [ 8564]: <-- data [1030]
Jul 02 13:46:08.27: [ 8564]: <-- data [1032]
Jul 02 13:46:08.27: [ 8564]: <-- data [1030]
Jul 02 13:46:08.27: [ 8564]: <-- data [1025]
Jul 02 13:46:10.26: [ 8564]: <-- data [1027]
Jul 02 13:46:10.26: [ 8564]: <-- data [1030]
Jul 02 13:46:10.26: [ 8564]: <-- data [840]
Jul 02 13:46:10.26: [ 8564]: <-- data [2]
Jul 02 13:46:13.28: [ 8564]: --> [2:OK]
Jul 02 13:46:13.28: [ 8564]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Jul 02 13:46:13.28: [ 8564]: <-- [9:AT+FTS=7\r]
Jul 02 13:46:13.36: [ 8564]: --> [2:OK]
Jul 02 13:46:13.36: [ 8564]: <-- [9:AT+FTH=3\r]
Jul 02 13:46:13.51: [ 8564]: --> [7:CONNECT]
Jul 02 13:46:13.51: [ 8564]: <-- HDLC<7:FF C8 FD F2 00 00 B6>
Jul 02 13:46:13.51: [ 8564]: <-- data [7]
Jul 02 13:46:13.51: [ 8564]: <-- data [2]
Jul 02 13:46:14.79: [ 8564]: --> [2:OK]
Jul 02 13:46:14.79: [ 8564]: SEND send PPS (partial page signal)
Jul 02 13:46:14.79: [ 8564]: SEND send MPS (more pages, same document)
Jul 02 13:46:14.79: [ 8564]: <-- [9:AT+FRH=3\r]
Jul 02 13:46:15.45: [ 8564]: --> [7:CONNECT]
Jul 02 13:46:16.51: [ 8564]: --> HDLC<5:FF C8 31 45 8F>
Jul 02 13:46:16.51: [ 8564]: --> [2:OK]
Jul 02 13:46:16.51: [ 8564]: SEND recv MCF (message confirmation)
Jul 02 13:46:16.51: [ 8564]: DELAY 70 ms
Jul 02 13:46:16.58: [ 8564]: SEND end page
Jul 02 13:46:16.58: [ 8564]: SEND FAX (000003369): FROM alex@xxxxxxxxxxxx TO *701-202-225-5652 (page 1 of 2 sent in 0:28)
Jul 02 13:46:16.58: [ 8564]: SEND begin page
Jul 02 13:46:16.58: [ 8564]: Reading MH-compressed image file
Jul 02 13:46:16.64: [ 8564]: SEND EOFB
Jul 02 13:46:16.64: [ 8564]: SEND send frame number 0
...<trimmed frames for readability>...
Jul 02 13:46:16.67: [ 8564]: SEND send frame number 220
Jul 02 13:46:16.67: [ 8564]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Jul 02 13:46:16.67: [ 8564]: DELAY 200 ms
Jul 02 13:46:16.87: [ 8564]: <-- [11:AT+FTM=146\r]
Jul 02 13:46:17.12: [ 8564]: --> [7:CONNECT]
Jul 02 13:46:17.12: [ 8564]: <-- data [1029]
Jul 02 13:46:17.12: [ 8564]: <-- data [1031]
Jul 02 13:46:17.12: [ 8564]: <-- data [1037]
Jul 02 13:46:17.12: [ 8564]: <-- data [1043]
Jul 02 13:46:19.12: [ 8564]: <-- data [1048]
Jul 02 13:46:19.12: [ 8564]: <-- data [1037]
Jul 02 13:46:19.12: [ 8564]: <-- data [1034]
Jul 02 13:46:19.12: [ 8564]: <-- data [1036]
Jul 02 13:46:21.12: [ 8564]: <-- data [1036]
Jul 02 13:46:21.12: [ 8564]: <-- data [1030]
Jul 02 13:46:21.12: [ 8564]: <-- data [1037]
Jul 02 13:46:21.12: [ 8564]: <-- data [1040]
Jul 02 13:46:23.11: [ 8564]: <-- data [1037]
Jul 02 13:46:23.11: [ 8564]: <-- data [1032]
Jul 02 13:46:23.11: [ 8564]: <-- data [1027]
Jul 02 13:46:23.11: [ 8564]: <-- data [1032]
Jul 02 13:46:25.11: [ 8564]: <-- data [1034]
Jul 02 13:46:25.11: [ 8564]: <-- data [1029]
Jul 02 13:46:25.11: [ 8564]: <-- data [1029]
Jul 02 13:46:27.11: [ 8564]: <-- data [1041]
Jul 02 13:46:27.11: [ 8564]: <-- data [1028]
Jul 02 13:46:27.11: [ 8564]: <-- data [1031]
Jul 02 13:46:27.11: [ 8564]: <-- data [1038]
Jul 02 13:46:29.10: [ 8564]: <-- data [1027]
Jul 02 13:46:29.10: [ 8564]: <-- data [1036]
Jul 02 13:46:29.10: [ 8564]: <-- data [1036]
Jul 02 13:46:29.10: [ 8564]: <-- data [1027]
Jul 02 13:46:31.10: [ 8564]: <-- data [1035]
Jul 02 13:46:31.10: [ 8564]: <-- data [1032]
Jul 02 13:46:31.10: [ 8564]: <-- data [1035]
Jul 02 13:46:33.10: [ 8564]: <-- data [1031]
Jul 02 13:46:33.10: [ 8564]: <-- data [1030]
Jul 02 13:46:33.10: [ 8564]: <-- data [1039]
Jul 02 13:46:33.10: [ 8564]: <-- data [1032]
Jul 02 13:46:35.09: [ 8564]: <-- data [1040]
Jul 02 13:46:35.09: [ 8564]: <-- data [1040]
Jul 02 13:46:35.09: [ 8564]: <-- data [1033]
Jul 02 13:46:35.09: [ 8564]: <-- data [1031]
Jul 02 13:46:37.09: [ 8564]: <-- data [1036]
Jul 02 13:46:37.09: [ 8564]: <-- data [1028]
Jul 02 13:46:37.09: [ 8564]: <-- data [1028]
Jul 02 13:46:37.09: [ 8564]: <-- data [1032]
Jul 02 13:46:39.09: [ 8564]: <-- data [1035]
Jul 02 13:46:39.09: [ 8564]: <-- data [1033]
Jul 02 13:46:39.09: [ 8564]: <-- data [1038]
Jul 02 13:46:41.08: [ 8564]: <-- data [1037]
Jul 02 13:46:41.08: [ 8564]: <-- data [1029]
Jul 02 13:46:41.08: [ 8564]: <-- data [1034]
Jul 02 13:46:41.08: [ 8564]: <-- data [1031]
Jul 02 13:46:43.08: [ 8564]: <-- data [1033]
Jul 02 13:46:43.08: [ 8564]: <-- data [1037]
Jul 02 13:46:43.08: [ 8564]: <-- data [1033]
Jul 02 13:46:43.08: [ 8564]: <-- data [1031]
Jul 02 13:46:45.08: [ 8564]: <-- data [1042]
Jul 02 13:46:45.08: [ 8564]: <-- data [1031]
Jul 02 13:46:45.08: [ 8564]: <-- data [1034]
Jul 02 13:46:47.07: [ 8564]: <-- data [1034]
Jul 02 13:46:47.07: [ 8564]: <-- data [1033]
Jul 02 13:46:47.07: [ 8564]: <-- data [920]
Jul 02 13:46:47.07: [ 8564]: <-- data [2]
Jul 02 13:46:50.66: [ 8564]: --> [2:OK]
Jul 02 13:46:50.66: [ 8564]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Jul 02 13:46:50.66: [ 8564]: <-- [9:AT+FTS=9\r]
Jul 02 13:46:50.76: [ 8564]: --> [2:OK]
Jul 02 13:46:50.76: [ 8564]: <-- [9:AT+FTH=3\r]
Jul 02 13:46:50.91: [ 8564]: --> [7:CONNECT]
Jul 02 13:46:50.91: [ 8564]: <-- HDLC<7:FF C8 FD F4 80 00 3B>
Jul 02 13:46:50.91: [ 8564]: <-- data [7]
Jul 02 13:46:50.91: [ 8564]: <-- data [2]
Jul 02 13:46:52.19: [ 8564]: --> [2:OK]
Jul 02 13:46:52.19: [ 8564]: SEND send PPS (partial page signal)
Jul 02 13:46:52.19: [ 8564]: SEND send EOP (no more pages or documents)
Jul 02 13:46:52.19: [ 8564]: <-- [9:AT+FRH=3\r]
Jul 02 13:46:53.05: [ 8564]: --> [7:CONNECT]
Jul 02 13:46:53.89: [ 8564]: --> HDLC<5:FF C8 31 45 8F>
Jul 02 13:46:53.89: [ 8564]: --> [2:OK]
Jul 02 13:46:53.89: [ 8564]: SEND recv MCF (message confirmation)
Jul 02 13:46:53.89: [ 8564]: DELAY 70 ms
Jul 02 13:46:53.96: [ 8564]: SEND end page
Jul 02 13:46:53.96: [ 8564]: SEND FAX (000003369): FROM alex@xxxxxxxxxxxx TO *701-202-225-5652 (page 2 of 2 sent in 0:37)
Jul 02 13:46:53.96: [ 8564]: SEND FAX (000003369): FROM alex@xxxxxxxxxxxx TO *701-202-225-5652 (docq/doc1934.pdf;31 sent in 1:05)
Jul 02 13:46:54.97: [ 8564]: <-- [9:AT+FTH=3\r]
Jul 02 13:46:55.16: [ 8564]: --> [7:CONNECT]
Jul 02 13:46:55.16: [ 8564]: <-- HDLC<3:FF C8 DF>
Jul 02 13:46:55.16: [ 8564]: <-- data [3]
Jul 02 13:46:55.16: [ 8564]: <-- data [2]
Jul 02 13:46:56.34: [ 8564]: --> [2:OK]
Jul 02 13:46:56.34: [ 8564]: MODEM input buffering enabled
Jul 02 13:46:56.34: [ 8564]: <-- [5:ATH0\r]
Jul 02 13:46:56.57: [ 8564]: --> [2:OK]
Jul 02 13:46:56.57: [ 8564]: MODEM set DTR OFF
Jul 02 13:46:56.57: [ 8564]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jul 02 13:46:56.57: [ 8564]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions