[hylafax-users] Incorrect EOP response sending fax

[javivf <javivf@xxxxxxxxx>]

Hi there :)

I'm using HylaFAX 4.3.3 on Debian sid and I've a Conceptronic External 
56K Modem. I can't see where is the problem. Can someone help me? Thanks 
in advance.

Here log transmission...

jun 19 12:15:25.01: [21781]: <-- [12:AT+FCLASS=1\r]
jun 19 12:15:25.11: [21781]: --> [2:OK]
jun 19 12:15:25.11: [21781]: MODEM set XON/XOFF/FLUSH: input ignored, 
output disabled
jun 19 12:15:25.12: [21781]: DIAL 973565544
jun 19 12:15:25.12: [21781]: <-- [14:ATDT973565544\r]
jun 19 12:15:51.27: [21781]: --> [7:CONNECT]
jun 19 12:15:53.16: [21781]: --> [2:OK]
jun 19 12:15:53.16: [21781]: REMOTE NSF "00 00 11 90 00 8A 4F 10 4D 4F 
42 4C 45 53 20 53 41 4C 56 41 4E 59 20 20 01 06 00 03 00 00"
jun 19 12:15:53.16: [21781]: NSF remote fax equipment: Canon
jun 19 12:15:53.16: [21781]: NSF remote station ID: "XXXXXX XXXXXXX  "
jun 19 12:15:53.16: [21781]: <-- [9:AT+FRH=3\r]
jun 19 12:15:53.17: [21781]: --> [7:CONNECT]
jun 19 12:15:53.86: [21781]: --> [2:OK]
jun 19 12:15:53.86: [21781]: REMOTE CSI "973 565544"
jun 19 12:15:53.86: [21781]: <-- [9:AT+FRH=3\r]
jun 19 12:15:53.87: [21781]: --> [7:CONNECT]
jun 19 12:15:54.17: [21781]: --> [2:OK]
jun 19 12:15:54.17: [21781]: REMOTE best rate 9600 bit/s
jun 19 12:15:54.17: [21781]: REMOTE max A4 page width (215 mm)
jun 19 12:15:54.17: [21781]: REMOTE max unlimited page length
jun 19 12:15:54.17: [21781]: REMOTE best vres 7.7 line/mm
jun 19 12:15:54.17: [21781]: REMOTE format support: MH
jun 19 12:15:54.17: [21781]: REMOTE best 20 ms, 10 ms/scanline
jun 19 12:15:54.17: [21781]: USE 9600 bit/s
jun 19 12:15:54.17: [21781]: SEND file "docq/doc122.ps;c1"
jun 19 12:15:54.17: [21781]: USE A4 page width (215 mm)
jun 19 12:15:54.17: [21781]: USE unlimited page length
jun 19 12:15:54.17: [21781]: USE 7.7 line/mm
jun 19 12:15:54.17: [21781]: USE 1-D MH
jun 19 12:15:54.17: [21781]: USE 10 ms/scanline
jun 19 12:15:54.17: [21781]: SEND training at v.29 9600 bit/s
jun 19 12:15:54.17: [21781]: DELAY 70 ms
jun 19 12:15:54.24: [21781]: <-- [9:AT+FTH=3\r]
jun 19 12:15:54.29: [21781]: --> [7:CONNECT]
jun 19 12:15:54.29: [21781]: <-- data [23]
jun 19 12:15:54.29: [21781]: <-- data [2]
jun 19 12:15:54.31: [21781]: --> [7:CONNECT]
jun 19 12:15:54.32: [21781]: <-- data [6]
jun 19 12:15:54.32: [21781]: <-- data [2]
jun 19 12:15:56.49: [21781]: --> [2:OK]
jun 19 12:15:56.49: [21781]: DELAY 70 ms
jun 19 12:15:56.56: [21781]: MODEM set XON/XOFF/FLUSH: input 
interpreted, output disabled
jun 19 12:15:56.56: [21781]: <-- [10:AT+FTM=96\r]
jun 19 12:15:57.08: [21781]: --> [7:CONNECT]
jun 19 12:15:57.08: [21781]: <-- data [1024]
jun 19 12:15:57.08: [21781]: <-- data [776]
jun 19 12:15:57.08: [21781]: <-- data [2]
jun 19 12:15:58.64: [21781]: --> [2:OK]
jun 19 12:15:58.64: [21781]: MODEM set XON/XOFF/DRAIN: input ignored, 
output disabled
jun 19 12:15:58.64: [21781]: <-- [9:AT+FRH=3\r]
jun 19 12:15:58.88: [21781]: --> [7:CONNECT]
jun 19 12:16:00.02: [21781]: --> [2:OK]
jun 19 12:16:00.02: [21781]: TRAINING succeeded
jun 19 12:16:00.02: [21781]: DELAY 70 ms
jun 19 12:16:00.10: [21781]: <-- [10:AT+FTM=96\r]
jun 19 12:16:00.69: [21781]: --> [7:CONNECT]
jun 19 12:16:00.69: [21781]: MODEM set XON/XOFF/FLUSH: input 
interpreted, output disabled
jun 19 12:16:00.69: [21781]: SEND begin page
jun 19 12:16:00.86: [21781]: Reading MMR-compressed image file
jun 19 12:16:00.96: [21781]: <-- data [38]
jun 19 12:16:00.97: [21781]: SENT 38 bytes of data
jun 19 12:16:00.97: [21781]: <-- data [36]
jun 19 12:16:00.97: [21781]: SENT 36 bytes of data
jun 19 12:16:00.97: [21781]: <-- data [12]
jun 19 12:16:00.97: [21781]: SENT 12 bytes of data
jun 19 12:16:00.97: [21781]: <-- data [42]
jun 19 12:16:00.97: [21781]: SENT 42 bytes of data
jun 19 12:16:00.97: [21781]: <-- data [47]

more about sending data...

jun 19 12:16:49.29: [21781]: SENT 36 bytes of data
jun 19 12:16:49.29: [21781]: <-- data [36]
jun 19 12:16:49.29: [21781]: SENT 36 bytes of data
jun 19 12:16:49.29: [21781]: <-- data [36]
jun 19 12:16:49.29: [21781]: SENT 36 bytes of data
jun 19 12:16:49.29: [21781]: <-- data [12]
jun 19 12:16:49.29: [21781]: SENT 12 bytes of data
jun 19 12:16:49.29: [21781]: SEND 1D RTC
jun 19 12:16:49.29: [21781]: <-- data [29]
jun 19 12:16:49.29: [21781]: <-- data [2]
jun 19 12:16:49.29: [21781]: SEND end page
jun 19 12:17:20.29: [21781]: --> [2:OK]
jun 19 12:17:20.29: [21781]: MODEM set XON/XOFF/DRAIN: input ignored, 
output disabled
jun 19 12:17:20.29: [21781]: DELAY 90 ms
jun 19 12:17:20.39: [21781]: SEND send EOP (no more pages or documents)
jun 19 12:17:20.39: [21781]: <-- [9:AT+FTH=3\r]
jun 19 12:17:20.43: [21781]: --> [7:CONNECT]
jun 19 12:17:20.43: [21781]: <-- data [3]
jun 19 12:17:20.43: [21781]: <-- data [2]
jun 19 12:17:21.75: [21781]: --> [2:OK]
jun 19 12:17:21.75: [21781]: <-- [9:AT+FRH=3\r]
jun 19 12:17:24.86: [21781]: --> [0:]
jun 19 12:17:24.86: [21781]: MODEM <Empty line>
jun 19 12:17:24.86: [21781]: MODEM TIMEOUT: waiting for v.21 carrier
jun 19 12:17:24.86: [21781]: <-- data [1]
jun 19 12:17:25.07: [21781]: MODEM TIMEOUT: reading line from modem
jun 19 12:17:25.07: [21781]: MODEM <Timeout>
jun 19 12:17:25.07: [21781]: SEND send EOP (no more pages or documents)
jun 19 12:17:25.07: [21781]: <-- [9:AT+FTH=3\r]
jun 19 12:17:25.12: [21781]: --> [7:CONNECT]
jun 19 12:17:25.12: [21781]: <-- data [3]
jun 19 12:17:25.12: [21781]: <-- data [2]
jun 19 12:17:26.43: [21781]: --> [2:OK]
jun 19 12:17:26.43: [21781]: <-- [9:AT+FRH=3\r]
jun 19 12:17:29.54: [21781]: --> [0:]
jun 19 12:17:29.54: [21781]: MODEM <Empty line>
jun 19 12:17:29.54: [21781]: MODEM TIMEOUT: waiting for v.21 carrier
jun 19 12:17:29.54: [21781]: <-- data [1]
jun 19 12:17:29.75: [21781]: MODEM TIMEOUT: reading line from modem
jun 19 12:17:29.75: [21781]: MODEM <Timeout>
jun 19 12:17:29.75: [21781]: SEND send EOP (no more pages or documents)
jun 19 12:17:29.75: [21781]: <-- [9:AT+FTH=3\r]
jun 19 12:17:29.80: [21781]: --> [7:CONNECT]
jun 19 12:17:29.80: [21781]: <-- data [3]
jun 19 12:17:29.80: [21781]: <-- data [2]
jun 19 12:17:31.11: [21781]: --> [2:OK]
jun 19 12:17:31.12: [21781]: <-- [9:AT+FRH=3\r]
jun 19 12:17:34.22: [21781]: --> [0:]
jun 19 12:17:34.22: [21781]: MODEM <Empty line>
jun 19 12:17:34.22: [21781]: MODEM TIMEOUT: waiting for v.21 carrier
jun 19 12:17:34.22: [21781]: <-- data [1]
jun 19 12:17:34.43: [21781]: MODEM TIMEOUT: reading line from modem
jun 19 12:17:34.43: [21781]: MODEM <Timeout>
jun 19 12:17:34.43: [21781]: No response to EOP repeated 3 tries
jun 19 12:17:34.43: [21781]: <-- [9:AT+FTH=3\r]
jun 19 12:17:34.48: [21781]: --> [7:CONNECT]
jun 19 12:17:34.48: [21781]: <-- data [3]
jun 19 12:17:34.48: [21781]: <-- data [2]
jun 19 12:17:35.80: [21781]: --> [2:OK]
jun 19 12:17:35.80: [21781]: MODEM input buffering enabled
jun 19 12:17:35.80: [21781]: <-- [5:ATH0\r]
jun 19 12:17:36.22: [21781]: --> [10:NO CARRIER]
jun 19 12:17:36.22: [21781]: MODEM No carrier
jun 19 12:17:36.22: [21781]: MODEM set DTR OFF
jun 19 12:17:36.22: [21781]: SESSION END

And here probemodem output:

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 modem.

ATI0    RESULT = "OK"   RESPONSE = "TP560 Data/Fax/Voice 56K Modem"
ATI1    RESULT = "OK"   RESPONSE = "External Controller Ver3.00, 
CheckSum=3802"
ATI2    RESULT = "OK"   RESPONSE = "TEST OK!"
ATI3    RESULT = "OK"   RESPONSE = "TP560 Data/Fax/Voice 56K Modem"
ATI4    RESULT = "OK"   RESPONSE = "DSP Ver3.00 CheckSum=668C"
ATI5    RESULT = "OK"   RESPONSE = "CTR21 Complex Impedence"
ATI6    RESULT = "OK"   RESPONSE = "0"
ATI7    RESULT = "OK"   RESPONSE = "Controller Ver3.00 Date:Jan 02 14:16 
2002"
ATI8    RESULT = "OK"   RESPONSE = "DSP Ver3.00 Date:Jan 02 14:06 2002"
ATI9    RESULT = "OK"   RESPONSE = "Software Speakerphone"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,8"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAE=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
AT+FTM=?        RESULT = "OK"   RESPONSE = 
"24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=?        RESULT = "OK"   RESPONSE = 
"24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*