[hylafax-users] Need your help with Omni 288S configuration

[ima familija <mikeboxas@xxxxxxx>]

Dear Sirs,

we hope for you help.
We have Omni 288s and we try to use it in Class2.0, but we did not receive faxes from few partners. I found in the mail archive that it would be a good idea to use it in class 1. I try to configure it based on 1496 configuration file and it work, but there is still few problems - for example, we did not receive faxes from Cannon fax mashine (configured in Class 2 it received just few lines and then completly black page). 
There is how log and configuration files looks:

;=================================================================
Jun 14 15:56:31.69: [ 3708]: SESSION BEGIN 000000300 37052150817
Jun 14 15:56:31.69: [ 3708]: HylaFAX (tm) Version 4.3.0
Jun 14 15:56:31.69: [ 3708]: <-- [4:ATA\r]
Jun 14 15:56:39.44: [ 3708]: --> [7:CONNECT]
Jun 14 15:56:39.44: [ 3708]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Jun 14 15:56:39.44: [ 3708]: RECV FAX: begin
Jun 14 15:56:39.44: [ 3708]: <-- data [32]
Jun 14 15:56:39.44: [ 3708]: <-- data [2]
Jun 14 15:56:41.36: [ 3708]: --> [7:CONNECT]
Jun 14 15:56:41.36: [ 3708]: <-- data [23]
Jun 14 15:56:41.36: [ 3708]: <-- data [2]
Jun 14 15:56:42.06: [ 3708]: --> [7:CONNECT]
Jun 14 15:56:42.06: [ 3708]: <-- data [13]
Jun 14 15:56:42.06: [ 3708]: <-- data [2]
Jun 14 15:56:42.55: [ 3708]: --> [2:OK]
Jun 14 15:56:42.55: [ 3708]: <-- [9:AT+FRH=3\r]
Jun 14 15:56:48.57: [ 3708]: --> [5:ERROR]
Jun 14 15:56:48.57: [ 3708]: MODEM Command error
Jun 14 15:56:48.57: [ 3708]: RECV FAX: RSPREC error/got EOT
Jun 14 15:56:48.57: [ 3708]: RECV FAX: end
Jun 14 15:56:48.57: [ 3708]: SESSION END
;=================================================================

there is modem configuration (modem firmware updated to the last available):

;=================================================================
# Generic Class 1 modem configuration.
#
CountryCode: 370
AreaCode: 5
FAXNumber: +xxxxxxxxxxx
LongDistancePrefix: 0
InternationalPrefix: 000
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "XXXXXXXXXXX Ltd"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 50
#
#
# CONFIG: CLASS1.0: ZyXEL*O288S*-*
#
# BEGIN-SERVER
# END-SERVER
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use class 1 interface
ModemRate: 19200
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&H0 # disable flow control
ModemHardFlowCmd: AT&H3 # hardware flow control
ModemSoftFlowCmd: AT&H4 # software flow control
ModemSetupDTRCmd: AT&D2 # DTR off causes modem to hang up
ModemSetupDCDCmd: AT&C1 # DCD tracks carrier
ModemSetupAACmd: AT+FAA=0 # enable in current class
#
# Additional reset commands:
#
# &B1  DTE-DCE rate is fixed at DTE setting
# &N0  Auto-negotiate highest possible DCE-DCE link rate
# &S0  DSR always on
# *F0  Deny remote configuration
# S38.3=1 DCD on/off sequence follows UNIX standard
# 
ModemResetCmds: AT&B1&N0&S0*F0S38.3=1
#
#
ModemDialCmd: ATDT%s # no '@' 'cuz then busy not recognized
NoCarrierRetrys: 3 # retry 3 times on no carrier
#
ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
#
ModemMfrQueryCmd: AT+FMFR?
ModemModelQueryCmd: "!"
ModemRevQueryCmd: AT+FREV?
#
Class1FrameOverhead: 2 # 6.14 firmware does not include FCS
#
# Caller ID configuration setup.
#
#CallIDPattern: "CALLER NUMBER: " # pattern string for phone number info
#CallIDPattern: "CALLER NAME: " # pattern string for identity info
#
PagerSetupCmds: AT&K0&N15 # use V.22 at 1200 bps (PageNet)
;=================================================================

Please let me know if there is something we can try to improove.

Thank you very much in advance for your help and support!

Mike


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*