HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Fine tuning retry delay and numder of times to redial



Hi Luigi,

I don't know to much about this parameters, but I added this:
MaxDials: n
in the /etc/hylafax/hyla.conf and it works fine.
You can check it and many more in the hylafax-config man page.

Regards,

FAP.


2007/6/13, Luigi Carrieri <l.carrieri@xxxxxx>:
Hi everyone,
I use Hylafax 4.3.1 with Mainpine Rockforce Octo+ fax board.
Actually Hylafax tries 12 times to resend outgoing faxes when
an error occurs (e.g busy signal, no answer, etc.) with a delay
of 5 minutes between retries.
I want to fine tune this hylafax behavior and so I put the following
parameters in each config.ttySx modem configuration file (located
in <hylafax-home>/var/spool/etc) as suggested by hylafax-config manual:

# The delay in seconds to wait before retrying a job whose
# dialing attempt failed with a BUSY status result.
JobReqBusy:       180

# The delay in seconds to wait before retrying a job whose
# dialing attempt failed with a NO ANSWER status result.
JobReqNoAnswer:   180

# The delay in seconds to wait before retrying a job whose
# dialing attempt failed with a NO CARRIER status result.
JobReqNoCarrier:  180

# The number of times to redial a phone number after receiving
# a BUSY result code when the number has not been successfully dialed
before.
JobRetryBusy:     20

# The number of times to redial a phone number after the dialing
# attempt failed because of NO ANSWER when the number has not been
successfully dialed before.
JobRetryNoAnswer: 10

# The number of times to redial a phone number after the dialing
# attempt failed because of NO CARRIER when the number has not been
successfully dialed before.
JobRetryNoCarrier:10

# If a ring is heard and the call is not answered, the time in ms
# to wait before reinitializing the modem for the next call.
RingTimeout:      15000

Unfortunately Hylafax seems to ignore this configuration and
keeps on trying 12 times to send a fax before giving up.
What's wrong? Did I miss anything else?

Thanks in advance for your help.
Luigi

Ing. Luigi Carrieri
Consulente senior - Business solutions

56125 Pisa - Viale Gramsci, 12
Voice: +39 050 2202260 - Fax: +39 050 24421
Mobile: +39 335 7734062 - http://www.tai.it
____________________________________________________
COMUNICAZIONE AI SENSI LEGGE 675/96
Il presente messaggio di posta elettronica viene inviato al Vostro indirizzo
email, che abbiamo acquisito da Vostre Visite, da incontri commerciali,
elenchi di pubblico dominio, Vostre precedenti comunicazioni. Il Vostro dato
in questione e' in possesso di TAI S.r.l., che lo ha immagazzinato in
formato elettronico. Tali informazioni non saranno divulgate a terzi. Se
desiderate verificare, cancellare o modificare i dati in nostro possesso,
nel rispetto dell'art.13 della legge citata, inviate fax al numero
0554266356.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




--
FAP

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions