Re: [hylafax-users] Cant send but can recive... PLEASE HELP! THANK YOU!

[Darren Nickerson <darren@xxxxxxxxx>]

AA wrote:
> And Here is Send Log, User hear ringing, after answering no fax 
> recived, detailed log below:
>
>  
>
> Svi 14 16:23:16.84: [ 7946]: SESSION BEGIN 000000040 38551639513
>
> Svi 14 16:23:16.84: [ 7946]: HylaFAX (tm) Version 4.3.1
>
> Svi 14 16:23:16.84: [ 7946]: SEND FAX: JOB 24 DEST 639513 COMMID 
> 000000040 DEVICE '/dev/ttySL0' FROM 'Andrej <pitonije@gmai$
>
> Svi 14 16:23:16.84: [ 7946]: <-- [12:AT+FCLASS=1\r]
>
> Svi 14 16:23:16.84: [ 7946]: --> [2:OK]
>
> Svi 14 16:23:16.84: [ 7946]: DIAL 639513
>
> Svi 14 16:23:16.84: [ 7946]: <-- [13:ATX3DT639513\r]
>
> Svi 14 16:23:50.88: [ 7946]: --> [7:CONNECT]
>
> Svi 14 16:23:52.52: [ 7946]: --> [2:OK]
>
> Svi 14 16:23:52.52: [ 7946]: REMOTE NSF "AD 00 42 30 01 20 20 20 20 20 
> 20 20 20 20 20 20 20 20 20 20"
>
> Svi 14 16:23:52.52: [ 7946]: NSF remote fax equipment: FaxTalk
>
> Svi 14 16:23:52.52: [ 7946]: NSF remote station ID: "               "
>
> Svi 14 16:23:52.52: [ 7946]: <-- [9:AT+FRH=3\r]
>
> Svi 14 16:23:52.54: [ 7946]: --> [7:CONNECT]
>
> Svi 14 16:23:53.38: [ 7946]: --> [2:OK]
>
> Svi 14 16:23:53.38: [ 7946]: REMOTE CSI "PLETIKOSA"
>
> Svi 14 16:23:53.39: [ 7946]: <-- [9:AT+FRH=3\r]
>
> Svi 14 16:23:53.40: [ 7946]: --> [7:CONNECT]
>
> Svi 14 16:23:53.92: [ 7946]: --> [2:OK]
>
> Svi 14 16:23:53.92: [ 7946]: REMOTE best rate 14400 bit/s
>
> Svi 14 16:23:53.92: [ 7946]: REMOTE max A4 page width (215 mm)
>
> Svi 14 16:23:53.92: [ 7946]: REMOTE max unlimited page length
>
> Svi 14 16:23:53.92: [ 7946]: REMOTE best vres 7.7 line/mm
>
> Svi 14 16:23:53.92: [ 7946]: REMOTE format support: MH
>
> Svi 14 16:23:53.92: [ 7946]: REMOTE best 0 ms/scanline
>
> Svi 14 16:23:53.92: [ 7946]: USE 14400 bit/s
>
> Svi 14 16:23:53.92: [ 7946]: <-- [9:AT+FTH=3\r]
>
> Svi 14 16:23:54.00: [ 7946]: --> [7:CONNECT]
>
> Svi 14 16:23:54.00: [ 7946]: <-- data [3]
>
> Svi 14 16:23:54.00: [ 7946]: <-- data [2]
>
> Svi 14 16:23:55.30: [ 7946]: --> [2:OK]
>
> Svi 14 16:23:55.30: [ 7946]: <-- [5:ATH0\r]
>
> Svi 14 16:23:55.41: [ 7946]: --> [2:OK]
>
> Svi 14 16:23:55.41: [ 7946]: SESSION END

This looks like a fax transmission session that didn't have any work to 
do - ie: no document to send. Check the way you are submitting faxes to 
see if you can learn why this is happening. Try from the UNIX 
commandline 'sendfax' client first and see if you can send /etc/issue or 
/etc/resolv.conf and then work from there.

-Darren

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*