HylaFAX The world's most advanced open source fax server |
Hi Andrej; What does the users machine do ? Does it report an error ? Please set the logging to 0xfff and then post the detailed logs
here. It would also help to know more about the modem, it’s firmware
(use Minicom to send commands ATi0 to ATi11), and the type of lines in use at
both ends of the call (analog, ISDN, VoIP, etc). Regards ANDREW RINALDI Mainpine Limited - Support USA +1 503 822 9944 |
Asia/Europe +44 1225 869439 From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Andrej Kolakovic Is there any problem, because user cannot
recive fax, line is ringing, fax is answering, hyla is doing something for 1,11
minute and here is the log: May 07 11:25:25.36: [ 5999]: SESSION BEGIN
000000027 XXXXXXXXXXX May 07 11:25:25.36: [ 5999]: HylaFAX (tm)
Version 4.3.1 May 07 11:25:25.36: [ 5999]: SEND FAX: JOB 17
DEST XXXXXX COMMID 000000027 DEVICE '/$ May 07 11:25:25.36: [ 5999]: <--
[12:AT+FCLASS=1\r] May 07 11:25:25.36: [ 5999]: --> [2:OK] May 07 11:25:25.36: [ 5999]: DIAL 626553 May 07 11:25:25.36: [ 5999]: <--
[13:ATX3DTXXXXXX\r] May 07 11:25:43.02: [ 5999]: -->
[7:CONNECT] May 07 11:25:45.12: [ 5999]: --> [2:OK] May 07 11:25:45.12: [ 5999]: REMOTE NSF
"00 00 0E 00 00 00 96 0F 41 07 00 10 00 02 9$ May 07 11:25:45.12: [ 5999]: NSF remote fax
equipment: Panasonic May 07 11:25:45.12: [ 5999]: NSF remote
station ID: "INFORMIS d.o.o. " May 07 11:25:45.12: [ 5999]: <--
[9:AT+FRH=3\r] May 07 11:25:45.14: [ 5999]: -->
[7:CONNECT] May 07 11:25:45.86: [ 5999]: --> [2:OK] May 07 11:25:45.86: [ 5999]: REMOTE CSI
"00 385 51 626 553" May 07 11:25:45.86: [ 5999]: <--
[9:AT+FRH=3\r] May 07 11:25:45.88: [ 5999]: -->
[7:CONNECT] May 07 11:25:46.24: [ 5999]: --> [2:OK] May 07 11:25:46.24: [ 5999]: REMOTE best rate
9600 bit/s May 07 11:25:46.24: [ 5999]: REMOTE max A4
page width (215 mm) May 07 11:25:46.24: [ 5999]: REMOTE max
unlimited page length May 07 11:25:46.24: [ 5999]: REMOTE best vres
15.4 line/mm May 07 11:25:46.24: [ 5999]: REMOTE format
support: MH, MR, MMR May 07 11:25:46.24: [ 5999]: REMOTE supports
T.30 Annex A, 256-byte ECM May 07 11:25:46.24: [ 5999]: REMOTE best 20
ms/scanline May 07 11:25:46.24: [ 5999]: USE 9600 bit/s May 07 11:25:46.24: [ 5999]: USE error
correction mode May 07 11:25:46.24: [ 5999]: <--
[9:AT+FTH=3\r] May 07 11:25:46.32: [ 5999]: -->
[7:CONNECT] May 07 11:25:46.32: [ 5999]: <-- data [3] May 07 11:25:46.32: [ 5999]: <-- data [2] May 07 11:25:47.62: [ 5999]: --> [2:OK] May 07 11:25:47.62: [ 5999]: <-- [5:ATH0\r] May 07 11:25:47.73: [ 5999]: --> [2:OK] May 07 11:25:47.73: [ 5999]: SESSION END Thank you |