 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Problem sending faxes
- To: <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] Problem sending faxes
- From: "Andrej Kolakovic" <pitonije@xxxxxxxxx>
- Date: Mon, 7 May 2007 12:04:10 +0200
|
Is there any problem, because user cannot recive fax, line
is ringing, fax is answering, hyla is doing something for 1,11 minute and here
is the log: May 07 11:25:25.36: [ 5999]: SESSION BEGIN 000000027
XXXXXXXXXXX May 07 11:25:25.36: [ 5999]: HylaFAX (tm) Version 4.3.1 May 07 11:25:25.36: [ 5999]: SEND FAX: JOB 17 DEST XXXXXX
COMMID 000000027 DEVICE '/$ May 07 11:25:25.36: [ 5999]: <-- [12:AT+FCLASS=1\r] May 07 11:25:25.36: [ 5999]: --> [2:OK] May 07 11:25:25.36: [ 5999]: DIAL 626553 May 07 11:25:25.36: [ 5999]: <-- [13:ATX3DTXXXXXX\r] May 07 11:25:43.02: [ 5999]: --> [7:CONNECT] May 07 11:25:45.12: [ 5999]: --> [2:OK] May 07 11:25:45.12: [ 5999]: REMOTE NSF "00 00 0E 00 00
00 96 0F 41 07 00 10 00 02 9$ May 07 11:25:45.12: [ 5999]: NSF remote fax equipment:
Panasonic May 07 11:25:45.12: [ 5999]: NSF remote station ID:
"INFORMIS d.o.o. " May 07 11:25:45.12: [ 5999]: <-- [9:AT+FRH=3\r] May 07 11:25:45.14: [ 5999]: --> [7:CONNECT] May 07 11:25:45.86: [ 5999]: --> [2:OK] May 07 11:25:45.86: [ 5999]: REMOTE CSI "00 385 51 626
553" May 07 11:25:45.86: [ 5999]: <-- [9:AT+FRH=3\r] May 07 11:25:45.88: [ 5999]: --> [7:CONNECT] May 07 11:25:46.24: [ 5999]: --> [2:OK] May 07 11:25:46.24: [ 5999]: REMOTE best rate 9600 bit/s May 07 11:25:46.24: [ 5999]: REMOTE max A4 page width (215
mm) May 07 11:25:46.24: [ 5999]: REMOTE max unlimited page
length May 07 11:25:46.24: [ 5999]: REMOTE best vres 15.4 line/mm May 07 11:25:46.24: [ 5999]: REMOTE format support: MH, MR,
MMR May 07 11:25:46.24: [ 5999]: REMOTE supports T.30 Annex A,
256-byte ECM May 07 11:25:46.24: [ 5999]: REMOTE best 20 ms/scanline May 07 11:25:46.24: [ 5999]: USE 9600 bit/s May 07 11:25:46.24: [ 5999]: USE error correction mode May 07 11:25:46.24: [ 5999]: <-- [9:AT+FTH=3\r] May 07 11:25:46.32: [ 5999]: --> [7:CONNECT] May 07 11:25:46.32: [ 5999]: <-- data [3] May 07 11:25:46.32: [ 5999]: <-- data [2] May 07 11:25:47.62: [ 5999]: --> [2:OK] May 07 11:25:47.62: [ 5999]: <-- [5:ATH0\r] May 07 11:25:47.73: [ 5999]: --> [2:OK] May 07 11:25:47.73: [ 5999]: SESSION END Thank you |
- Follow-Ups:
- Re: [hylafax-users] Problem sending faxes
- From: Andrew Rinaldi
- Re: [hylafax-users] Problem sending faxes
- From: Lee Howard
- Re: [hylafax-users] Problem sending faxes
- Prev by Date: [hylafax-users] hylafax
- Next by Date: [hylafax-users] MODEM Command Error
- Previous by thread: [hylafax-users] hylafax
- Next by thread: Re: [hylafax-users] Problem sending faxes
- Index(es):