HylaFAX
The world's most advanced open source fax server
Home
About
Developers
Download
Documentation
Support
Community
Get Involved
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
] [
Date Index
] [
Thread Index
]
Re: [hylafax-users] Unspecified Transmit Phase C error with Class 1
To
: Lee Howard <
faxguy@xxxxxxxxxxxxxxxx
>
Subject
: Re: [hylafax-users] Unspecified Transmit Phase C error with Class 1
From
:
Andrea.Un@xxxxxxxxxxxxxx
Cc
:
hylafax-users@xxxxxxxxxxxxxxxxxxxxx
,
hylafax-users@xxxxxxxxxxx
Date
: Mon, 30 Apr 2007 17:00:18 -0700
Hi Lee, here is the entire log. Also, the modem cannot reset itself after this kind of error occurred. I usually have to reset it with atz via cu -l or power cycle the modem.
uucp@fax:~/log$ more c000118351
Apr 30 12:21:34.73: [13131]: SESSION BEGIN 000118351 17736012556
Apr 30 12:21:34.74: [13131]: HylaFAX (tm) Version 4.2.3
Apr 30 12:21:34.74: [13131]: SEND FAX: JOB 35395 DEST 17736012556 COMMID 000118351 DEVICE '/dev/cua/a003' FROM 'RUBEN.HERNAND
EZ <RUBEN.HERNANDEZ@xxxxxxxxxxxxxx>' USER uucp
Apr 30 12:21:34.74: [13131]: <-- [12:AT+FCLASS=1\r]
Apr 30 12:21:34.76: [13131]: --> [2:OK]
Apr 30 12:21:34.76: [13131]: DIAL 9,,17736012556,0
Apr 30 12:21:34.76: [13131]: <-- [21:ATDT9,,17736012556,0\r]
Apr 30 12:21:54.45: [13131]: --> [7:CONNECT]
Apr 30 12:21:55.67: [13131]: --> [2:OK]
Apr 30 12:21:55.67: [13131]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 DE 00"
Apr 30 12:21:55.67: [13131]: NSF remote fax equipment: Brother MFC-3100C/MFC-8600
Apr 30 12:21:55.67: [13131]: <-- [9:AT+FRH=3\r]
Apr 30 12:21:55.71: [13131]: --> [7:CONNECT]
Apr 30 12:21:56.36: [13131]: --> [2:OK]
Apr 30 12:21:56.36: [13131]: REMOTE CSI "17736012556"
Apr 30 12:21:56.36: [13131]: <-- [9:AT+FRH=3\r]
Apr 30 12:21:56.40: [13131]: --> [7:CONNECT]
Apr 30 12:21:56.67: [13131]: --> [2:OK]
Apr 30 12:21:56.67: [13131]: REMOTE best rate 14400 bit/s
Apr 30 12:21:56.67: [13131]: REMOTE max A4 page width (215 mm)
Apr 30 12:21:56.67: [13131]: REMOTE max unlimited page length
Apr 30 12:21:56.67: [13131]: REMOTE best vres 15.4 line/mm
Apr 30 12:21:56.67: [13131]: REMOTE format support: MH
Apr 30 12:21:56.67: [13131]: REMOTE supports T.30 Annex A, 256-byte ECM
Apr 30 12:21:56.67: [13131]: REMOTE best 20 ms, 10 ms/scanline
Apr 30 12:21:56.67: [13131]: USE 14400 bit/s
Apr 30 12:21:56.67: [13131]: USE error correction mode
Apr 30 12:21:56.67: [13131]: SEND file "docq/doc35396.tif;31"
Apr 30 12:21:56.67: [13131]: USE A4 page width (215 mm)
Apr 30 12:21:56.67: [13131]: USE unlimited page length
Apr 30 12:21:56.67: [13131]: USE 7.7 line/mm
Apr 30 12:21:56.67: [13131]: USE 1-D MH
Apr 30 12:21:56.67: [13131]: USE 0 ms/scanline
Apr 30 12:21:56.67: [13131]: SEND training at v.17 14400 bit/s
Apr 30 12:21:56.67: [13131]: <-- [9:AT+FRS=7\r]
Apr 30 12:21:56.80: [13131]: --> [2:OK]
Apr 30 12:21:56.80: [13131]: <-- [9:AT+FTH=3\r]
Apr 30 12:21:56.87: [13131]: --> [7:CONNECT]
Apr 30 12:21:56.87: [13131]: <-- data [23]
Apr 30 12:21:56.87: [13131]: <-- data [2]
Apr 30 12:21:58.64: [13131]: --> [7:CONNECT]
Apr 30 12:21:58.64: [13131]: <-- data [7]
Apr 30 12:21:58.64: [13131]: <-- data [2]
Apr 30 12:21:59.10: [13131]: --> [2:OK]
Apr 30 12:21:59.10: [13131]: <-- [9:AT+FTS=7\r]
Apr 30 12:21:59.20: [13131]: --> [2:OK]
Apr 30 12:21:59.20: [13131]: <-- [11:AT+FTM=145\r]
Apr 30 12:21:59.25: [13131]: --> [7:CONNECT]
Apr 30 12:21:59.25: [13131]: DELAY 400 ms
Apr 30 12:21:59.66: [13131]: <-- data [1024]
Apr 30 12:21:59.66: [13131]: <-- data [1024]
Apr 30 12:21:59.66: [13131]: <-- data [652]
Apr 30 12:21:59.66: [13131]: <-- data [2]
Apr 30 12:22:02.35: [13131]: --> [2:]
Apr 30 12:22:02.35: [13131]: --> [2:OK]
Apr 30 12:22:02.35: [13131]: <-- [9:AT+FRH=3\r]
Apr 30 12:22:03.04: [13131]: --> [7:CONNECT]
Apr 30 12:22:03.96: [13131]: --> [2:OK]
Apr 30 12:22:03.96: [13131]: TRAINING succeeded
Apr 30 12:22:03.96: [13131]: SEND begin page
Apr 30 12:22:03.97: [13131]: SEND 1D RTC
Apr 30 12:22:03.97: [13131]: SEND send frame number 0
Apr 30 12:22:03.97: [13131]: SEND send frame number 1
Apr 30 12:22:03.97: [13131]: SEND send frame number 2
Apr 30 12:22:03.97: [13131]: SEND send frame number 3
Apr 30 12:22:03.97: [13131]: SEND send frame number 4
Apr 30 12:22:03.97: [13131]: SEND send frame number 5
Apr 30 12:22:03.97: [13131]: SEND send frame number 6
Apr 30 12:22:03.97: [13131]: SEND send frame number 7
Apr 30 12:22:03.97: [13131]: SEND send frame number 8
Apr 30 12:22:03.97: [13131]: SEND send frame number 9
Apr 30 12:22:03.97: [13131]: SEND send frame number 10
Apr 30 12:22:03.97: [13131]: SEND send frame number 11
Apr 30 12:22:03.97: [13131]: SEND send frame number 12
Apr 30 12:22:03.97: [13131]: SEND send frame number 13
Apr 30 12:22:03.97: [13131]: SEND send frame number 14
Apr 30 12:22:03.97: [13131]: SEND send frame number 15
Apr 30 12:22:03.97: [13131]: SEND send frame number 16
Apr 30 12:22:03.97: [13131]: SEND send frame number 17
Apr 30 12:22:03.97: [13131]: SEND send frame number 18
Apr 30 12:22:03.97: [13131]: SEND send frame number 19
Apr 30 12:22:03.97: [13131]: SEND send frame number 20
Apr 30 12:22:03.97: [13131]: SEND send frame number 21
Apr 30 12:22:03.97: [13131]: SEND send frame number 22
Apr 30 12:22:03.97: [13131]: SEND send frame number 23
Apr 30 12:22:03.97: [13131]: SEND send frame number 24
Apr 30 12:22:03.97: [13131]: SEND send frame number 25
Apr 30 12:22:03.97: [13131]: SEND send frame number 26
Apr 30 12:22:03.97: [13131]: SEND send frame number 27
Apr 30 12:22:03.97: [13131]: SEND send frame number 28
Apr 30 12:22:03.97: [13131]: SEND send frame number 29
Apr 30 12:22:03.97: [13131]: SEND send frame number 30
Apr 30 12:22:03.97: [13131]: SEND send frame number 31
Apr 30 12:22:03.97: [13131]: SEND send frame number 32
Apr 30 12:22:03.97: [13131]: SEND send frame number 33
Apr 30 12:22:03.98: [13131]: SEND send frame number 34
Apr 30 12:22:03.98: [13131]: SEND send frame number 35
Apr 30 12:22:03.98: [13131]: SEND send frame number 36
Apr 30 12:22:03.98: [13131]: SEND send frame number 37
Apr 30 12:22:03.98: [13131]: SEND send frame number 38
Apr 30 12:22:03.98: [13131]: SEND send frame number 39
Apr 30 12:22:03.98: [13131]: SEND send frame number 40
Apr 30 12:22:03.98: [13131]: SEND send frame number 41
Apr 30 12:22:03.98: [13131]: SEND send frame number 42
Apr 30 12:22:03.98: [13131]: SEND send frame number 43
Apr 30 12:22:03.98: [13131]: SEND send frame number 44
Apr 30 12:22:03.98: [13131]: SEND send frame number 45
Apr 30 12:22:03.98: [13131]: SEND send frame number 46
Apr 30 12:22:03.98: [13131]: SEND send frame number 47
Apr 30 12:22:03.98: [13131]: SEND send frame number 48
Apr 30 12:22:03.98: [13131]: SEND send frame number 49
Apr 30 12:22:03.98: [13131]: SEND send frame number 50
Apr 30 12:22:03.98: [13131]: SEND send frame number 51
Apr 30 12:22:03.98: [13131]: SEND send frame number 52
Apr 30 12:22:03.98: [13131]: SEND send frame number 53
Apr 30 12:22:03.98: [13131]: SEND send frame number 54
Apr 30 12:22:03.98: [13131]: SEND send frame number 55
Apr 30 12:22:03.98: [13131]: SEND send frame number 56
Apr 30 12:22:03.98: [13131]: SEND send frame number 57
Apr 30 12:22:03.98: [13131]: SEND send frame number 58
Apr 30 12:22:03.98: [13131]: SEND send frame number 59
Apr 30 12:22:03.98: [13131]: SEND send frame number 60
Apr 30 12:22:03.98: [13131]: SEND send frame number 61
Apr 30 12:22:03.98: [13131]: SEND send frame number 62
Apr 30 12:22:03.98: [13131]: SEND send frame number 63
Apr 30 12:22:03.98: [13131]: SEND send frame number 64
Apr 30 12:22:03.98: [13131]: SEND send frame number 65
Apr 30 12:22:03.98: [13131]: SEND send frame number 66
Apr 30 12:22:03.98: [13131]: SEND send frame number 67
Apr 30 12:22:03.98: [13131]: SEND send frame number 68
Apr 30 12:22:03.98: [13131]: SEND send frame number 69
Apr 30 12:22:03.98: [13131]: DELAY 200 ms
Apr 30 12:22:04.19: [13131]: <-- [11:AT+FTM=146\r]
Apr 30 12:22:34.20: [13131]: MODEM <Timeout>
Apr 30 12:22:34.20: [13131]: SEND end page
Apr 30 12:22:34.20: [13131]: Unspecified Transmit Phase C error
Apr 30 12:22:34.20: [13131]: <-- [9:AT+FTH=3\r]
Apr 30 12:22:41.76: [13131]: --> [0:]
Apr 30 12:22:41.76: [13131]: <-- [5:ATH0\r]
Apr 30 12:22:46.77: [13131]: MODEM <Timeout>
Apr 30 12:22:46.77: [13131]: SESSION END
Prev by Date:
Re: [hylafax-users] Unspecified Transmit Phase C error with Class 1
Next by Date:
[hylafax-users] Unspecified Transmit Phase C error with Class 1
Previous by thread:
Re: [hylafax-users] Unspecified Transmit Phase C error with Class 1
Next by thread:
[hylafax-users] Unspecified Transmit Phase C error with Class 1
Index(es):
Main
Thread
Project hosted by
iFAX Solutions