Re: [hylafax-users] CallerID in italy

[Disaster <sghebuz@xxxxxxxxx>]

On Tue, 2007-04-17 at 10:29 +0200, Michele Petrazzo - Unipex srl wrote:
> I don't know which standard are active in Italy, but on a ISDN line all
> the "who is" (translate from Italian "Chi é?", so Caller ID ) service is
> active in all ISDN lines, by default. If the OP has a standard ISDN line
> and a modem that support the CID service, I _think_ that all work.
Hi, I just called Telecom Italia and asked about callerid on my fax
lines:
1) one of them is a "real" analog without "who is" service enabled
2) the other 2 are connected to an isdn BRI (NT1 plus) so the service
should be enable by default

anyway I'm not able to receive the callid on my modem connected to the
isdn. here are the relevant parts of my logs:

Apr 17 12:28:34.36: [30264]: SESSION BEGIN 000047047 +39***
Apr 17 12:28:34.36: [30264]: HylaFAX (tm) Version 5.1.2
Apr 17 12:28:34.36: [30264]: <-- [4:ATA\r]
Apr 17 12:28:46.98: [30264]: --> [9:+F34:12,1]
Apr 17 12:28:46.98: [30264]: V.8 handshaking succeeded, V.34-Fax
(SuperG3) capability enabled.
Apr 17 12:28:46.98: [30264]: Primary channel rate: 28800 bit/s, Control
channel rate: 1200 bit/s.
Apr 17 12:28:46.98: [30264]: --> [7:CONNECT]
Apr 17 12:28:46.98: [30264]: ANSWER: FAX CONNECTION  DEVICE
'/dev/ttyACM1'
Apr 17 12:28:46.98: [30264]: STATE CHANGE: ANSWERING -> RECEIVING
Apr 17 12:28:46.98: [30264]: RECV FAX: begin
Apr 17 12:28:46.98: [30264]: Control channel selected
Apr 17 12:28:46.98: [30264]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86
62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 AC 74 8C 74 4C>
Apr 17 12:28:46.98: [30264]: <-- data [32]
Apr 17 12:28:46.98: [30264]: <-- data [2]
Apr 17 12:28:46.98: [30264]: <-- HDLC<23:FF C0 02 32 4A CA 04 F2 92 32
E2 F2 E4 32 32 82 22 04 04 04 04 04 04>
Apr 17 12:28:46.98: [30264]: <-- data [23]
Apr 17 12:28:46.98: [30264]: <-- data [2]
Apr 17 12:28:46.98: [30264]: <-- HDLC<13:FF C8 01 04 77 5F 23 01 FB C1
01 01 18>
Apr 17 12:28:46.98: [30264]: <-- data [13]
Apr 17 12:28:46.98: [30264]: <-- data [2]
Apr 17 12:28:47.90: [30264]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 89 69>
Apr 17 12:28:47.90: [30264]: REMOTE TSI ""
Apr 17 12:28:47.97: [30264]: --> HDLC<9:FF C8 C1 00 40 1F 22 8B 1B>
Apr 17 12:28:47.97: [30264]: REMOTE wants 28800 bit/s
Apr 17 12:28:47.97: [30264]: REMOTE wants A4 page width (215 mm)
Apr 17 12:28:47.97: [30264]: REMOTE wants unlimited page length
Apr 17 12:28:47.97: [30264]: REMOTE wants 3.85 line/mm
Apr 17 12:28:47.97: [30264]: REMOTE wants 2-D MMR
Apr 17 12:28:47.97: [30264]: REMOTE wants T.30 Annex A, 256-byte ECM

config:
RingsBeforeAnswer:      2
ModemResetCmds: AT+VCID=1
CallIDPattern:  "NMBR="

What I'm missing?

Andrea


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*