Re: [hylafax-users] CallerID in italy

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Michele,

Italy uses at least three different Caller ID Standards.  You will need to
match the standards from the ISDN equipment and the modem for this to work.
It's the standards at the analog interface that matter NOT at the ISDN
interface.

Regards

ANDREW RINALDI
Mainpine Limited - Support
USA +1 503 822 9944 | Asia/Europe +44 1225 869439  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com


-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Michele Petrazzo -
Unipex srl
Sent: 17 April 2007 09:30
To: Hylafax Mailling List
Subject: Re: [hylafax-users] CallerID in italy

Andrew Rinaldi wrote:
> Hi,
> 
> When you look for a modem you will also need to understand which
> Caller ID standard your ISDN service provides.... in Italy this will
> probably be ETSI but it will depend a lot on your ISDN equipment.
> 

I don't know which standard are active in Italy, but on a ISDN line all
the "who is" (translate from Italian "Chi é?", so Caller ID ) service is
active in all ISDN lines, by default. If the OP has a standard ISDN line
and a modem that support the CID service, I _think_ that all work.

Michele




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*