Re: [hylafax-users] Server Hardware (rackmount, raid, etc)

["Darren Nickerson" <darren.nickerson@xxxxxxxx>]

The Mainpines also work very well in the 2950s (it's another one of our 
standard combinations), the only problem is that they don't have a T1 
interface so you'd need a minimum of three 8-port cards and a channel bank 
to get the same density. I think you mentioned wanting to use a few 'extra' 
T1 circuits (lucky guy)! Unfortunately, the 2950s don't come in a 3-slot 
PCI-X configuration, they can have at most two PCI-X slots and one PCI 
Express.

-Darren

"Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx> wrote:

> Hi Mike,
>
> If you want high performance V.34 fax at reasonable cost then why not take 
> a
> look at our RockForce fax cards
> http://www.mainpine.com/products_rockforce.php
>
> Not only do we feature industry standard interfaces (unlike the 
> proprietary
> Eicon products) but we also have enhancements such as SideBand which allow
> you to reset individual ports under full control of HylaFAX.  We can also
> offer seamless upgrades to the next generation I/O architectures.
>
> Regards
>
> ANDREW RINALDI
> Mainpine Limited - Support
> USA +1 503 822 9944 | Asia/Europe +44 1225 869439
> andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com
>
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Mike McLain
> Sent: 11 April 2007 22:23
> To: hylafax-users@xxxxxxxxxxx
> Subject: [hylafax-users] Server Hardware (rackmount, raid, etc)
>
> I am currently running HylaFAX (tm) Version 4.1.8 under Slackware 9.1.0
> utilizing two Comtrol PCI RocketModem 4 port devices. Everything is
> working great with HylaFAX, except I am going to be migrating to newer
> underlying hardware. It currently is on a desktop level machine and
> hardware and wanted to get input on what hardware setups various people
> have and the success/failures they've experienced.
>
> I'm leaning towards Dell just because that is what we have for our other
> servers, but I'm open to other suggestions that people may have. I'm
> also contemplating an Eicon Diva Server as I have some "extra" T1s lying
> around that aren't currently being utilized. Has anyone had any
> experience with an Eicon Diva in a Dell box? Or Comtrol's in a Dell box
> for that matter too?
>
> I've checked the archives and didn't see anything regarding Dell server
> hardware.
>
> Mike McLain
> Network Administrator
> ReadyLink HealthCare
>
> ----------------------------------------------------------------------------
> -
> The information contained in this e-mail message is confidential and/or
> privileged and is intended only for the use of the individual or entity
> named above. Please notify the sender immediately by email if you have
> received this email by mistake and delete this email from your system.
>
> If you are not the intended recipient you are hereby notified that any
> unauthorized disclosure, copying, distributing or taking any action in
> reliance of contents of this information is strictly prohibited.
> ----------------------------------------------------------------------------
> -
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*