Re: [hylafax-users] All faxes failing

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Dan Brummer wrote:

> Apr 04 23:01:42.57: [25966]: USE 9600 bit/s
> Apr 04 23:01:42.57: [25966]: USE error correction mode
> Apr 04 23:01:42.57: [25966]: <-- [9:AT+FTH=3\r]
> Apr 04 23:01:42.57: [25966]: --> [7:CONNECT]
> Apr 04 23:01:42.57: [25966]: <-- HDLC<3:FF C8 DF>
> Apr 04 23:01:42.57: [25966]: <-- data [3]
> Apr 04 23:01:42.57: [25966]: <-- data [2]
> Apr 04 23:01:43.65: [25966]: --> [2:OK]
> Apr 04 23:01:43.65: [25966]: MODEM input buffering enabled
> Apr 04 23:01:43.65: [25966]: <-- [5:ATH0\r]
> Apr 04 23:01:43.75: [25966]: --> [2:OK]

Double-check how you are submitting faxes.  The log you show basically 
is telling you that faxq invoked faxsend to transmit a fax, but when 
faxsend got around to looking at the documents to transmit (now, after 
the call has been placed) it doesn't find anything to transmit.

So most likely the problem is that the documents are disappearing from 
/var/spool/hylafax/docq (faxqclean malfunction?) or that the client is 
submitting bad documents.

Thanks,

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*