[hylafax-users] Cannot send faxes using Duxbury/IP586x modem

["Frank Millman" <frank@xxxxxxxxxxxx>]

Hi all

I have installed Hylafax 4.3.1 on Fedora Core 6. I am trying to get working
a Duxbury 56k fax/modem, which uses the IC Ace IP586x 56K V.90 chip.

After composing this message, I have learned about winmodems, and I now
realise that my problem may simply be that this modem is a winmodem, and
without a linux driver it will never work. If this is the case, please
ignore the rest of the message. I have googled to try to find a linux driver
for this chip, but without success.

Frank Millman

- original message follows -

I have an identical modem attached to a Windows XP machine, using the
standard Microsoft fax software. I am testing by sending a fax to/from each
machine.

I can send a fax from Windows, and Hylafax receives it correctly.

I cannot send a fax from Hylafax to Windows. The Windows machine can receive
faxes from outside sources, so I don't think the problem is on the receive
side.

I have tried hardware flow control and software flow control. I have tried
swapping the modems. The results are the same.

I tried substituting a USR 56k fax/modem on the sending machine, and without
even regenerating the config file, it sent a fax to the Windows machine
successfully.

The send always fails at the same point. Here is the relevant extract from
the log.

Feb 23 09:28:20.74: [ 4248]: SEND training at v.17 14400 bit/s
Feb 23 09:28:20.74: [ 4248]: <-- [9:AT+FRS=7\r]
Feb 23 09:28:20.75: [ 4248]: --> [2:OK]
Feb 23 09:28:20.75: [ 4248]: <-- [9:AT+FTH=3\r]
Feb 23 09:28:20.80: [ 4248]: --> [7:CONNECT]
Feb 23 09:28:20.80: [ 4248]: <-- HDLC<23:FF C0 C2 26 4E F6 66 E6 86 16 C2 04
04 04 04 04 04 04 04 04 04 04 04>
Feb 23 09:28:20.80: [ 4248]: <-- data [23]
Feb 23 09:28:20.80: [ 4248]: <-- data [2]
Feb 23 09:28:20.82: [ 4248]: --> [1:]
Feb 23 09:28:20.82: [ 4248]: --> [7:CONNECT]
Feb 23 09:28:20.82: [ 4248]: <-- HDLC<6:FF C8 C1 00 45 1E>
Feb 23 09:28:20.82: [ 4248]: <-- data [6]
Feb 23 09:28:20.82: [ 4248]: <-- data [2]
Feb 23 09:28:22.99: [ 4248]: --> [2:OK]
Feb 23 09:28:22.99: [ 4248]: <-- [9:AT+FTS=7\r]
Feb 23 09:28:23.00: [ 4248]: --> [2:OK]
Feb 23 09:28:23.00: [ 4248]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Feb 23 09:28:23.00: [ 4248]: <-- [11:AT+FTM=145\r]
Feb 23 09:28:24.68: [ 4248]: --> [7:CONNECT]
Feb 23 09:28:24.68: [ 4248]: <-- data [1024]
Feb 23 09:28:24.68: [ 4248]: <-- data [1024]
Feb 23 09:28:24.68: [ 4248]: <-- data [652]
Feb 23 09:28:24.68: [ 4248]: <-- data [2]
Feb 23 09:28:25.24: [ 4248]: --> [10:NO CARRIER]
Feb 23 09:28:25.24: [ 4248]: MODEM No carrier
Feb 23 09:29:25.24: [ 4248]: MODEM TIMEOUT: reading line from modem

Any suggestions will be much appreciated.

Thanks

Frank Millman


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*