Re: [hylafax-users] Faxgetty not functioning well for very high volume outbound fax

[ACL <access_you@xxxxxxxxx>]

we are using mainpine OCTO+ and HylaFAX 4.3.1 release.

 

the modem should be ok. when faxgetty is restarted, queued fax could be sent.

 

andrew rinaldi <andrew.rinaldi@xxxxxxxxxxxx> 說：

寄件人: "andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>
收件人: "'ACL'" <access_you@xxxxxxxxx>, <hylafax-users@xxxxxxxxxxx>
標題: RE: [hylafax-users] Faxgetty not functioning well for very high volume outbound fax
日期: Tue, 13 Feb 2007 12:01:05 -0000

Hi,

 

My advice would be to tell us what modems, firmware, and HylaFAX version you are using.

 

Regards

 

ANDREW RINALDI

Mainpine Limited Support

USA +1 503 822 9944 | Asia/Europe +44 1225 869439  

andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

---

From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of ACL
Sent: 13 February 2007 11:01
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Faxgetty not functioning well for very high volume outbound fax

I have a server running 48 fax modems (cpu=P4 2.66G, 90%+ utilisation , mem=512MB, 60% used, no swap used) nonstop 24/7.

 

faxes are sending every minute.

 

Every day, there are one or two fax modems failed to send queued fax. After killing the corresponding faxgetty, the faxgetty is restarted automatically by init and then the fax modems start to send fax again. They keep running for several days or months.

 

This happens randomly among the 48 fax modems.

 

- Modem status is "running and idle" when faxgetty is not functioning.

- sendfax, faxrm, faxstat, etc are functioning well.

 

As a workaround, I have written a program to kill faxgetty if the modem is idle for certain time.

 

Pls advise.

 

 

_______________________________________
YM - 褩??洘
憩呾斕?衄奻鋒ㄛ斕腔攬衭゛褫眕隱狟?洘緻斕ㄛ?斕奻鋒?憩夔蕾撈艘善ㄛ￤睡挲?飲?軗囮﹝
http://messenger.yahoo.com.hk

_______________________________________
YM - 離線訊息
就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任何說話都冇走失。
http://messenger.yahoo.com.hk