Re: [hylafax-users] [ANN] Hylapex 2.2.0

["Cecil Brand" <brandc.RD@xxxxxxxxxxxxxxx>]

Hi,

Thanks for the replay. I installed a new XP machine with the latest SP2
and Patches.
I downloaded the pre-compiled "Hylapex_full_V2.2.0.exe" on the machine.


After this I run the application, it asked me to run the "3 button"  I
press the first,
it activates the second button but nothing executes to answer yes or ok
on...
the same happens with the second button up to the third 

After I pressed the third, I go and check the printers... nothing. I
tried this 3 times 
(every time on a new machine) giving any where from 5 second to 5
minutes between 
pressing the next button.

thx
Cecil


>>> Michele Petrazzo <michele.petrazzo@xxxxxxxxx> 2007/02/06 11:40 AM
>>>
Cecil Brand wrote:
> Hi Michele,
> 

Ciao,

> I tried to install hylapex on Windows XP. a Quick question, do I
have
>  to install all the pre required software on Windows first? Because
> it seems that

What installation? Source or pre-compiled? If windows pre-compiled, no
of course. If it's the first time installation, only download the
"full"
.exe from sf.net, install and use it!

> I'm unable to get the Redmon or printer entry installed... any 
> thoughts??

Go to administration, press the "three buttons", wait some seconds and
you have end the installation procedure. That's all.

> 
> thx Cecil
> 

Bye,
Michele

_____________________________________________________________________

University of the Free State: This message and its contents are subject to a disclaimer. 
Please refer to  http://www.uovs.ac.za/disclaimer  for full details. 

Universiteit van die Vrystaat: 
Hierdie boodskap en sy inhoud is aan 'n vrywaringsklousule onderhewig. 
Volledige besonderhede is by http://www.uovs.ac.za/vrywaring  beskikbaar. 
_____________________________________________________________________

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*