Re: [hylafax-users] Modem on USB to serial converter

["andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Aladar,

 

Please reply in list so that everyone can help you and learn from your experience - thanks !

 

That's a great help.... few (if any) 'Win/Lin-modems" will work reliably for fax.  get yourself a decent hardware modem based on the Agere Venus chipset.

 

Regards

 

ANDREW RINALDI

Mainpine Limited Support

USA +1 503 822 9944 | Asia/Europe +44 1225 869439  

andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

---

From: Róth Tamás [mailto:aladar@xxxxxxxxxx]
Sent: 16 January 2007 16:48
To: andrew.rinaldi@xxxxxxxxxxxx
Subject: RE: [hylafax-users] Modem on USB to serial converter

Hi,

i can talk to the modem and it seems to be working fine, 
all infos i got back when asking for them...
I also upgraded my hylafax 
server to 4.3.0-7~bpo.1 but the problem is still there.

These are the 
infos i got from the modem:
ati1
CD08.55 - 747 SERIAL - DSP PATCH: 
3.26

OK
ati2
ROM TEST 
OK

OK
ati3
MD56xx

OK
ati4
Intel 
Corporation

OK
ati5
Full V.92 Upgradeable
Present, 32K DSP 
RAM.000
Host I/F: Serial
P. Mem. : 008 Bit 001 W.S.
D. Mem  : 008 
Bit 001 W.S.
DSP loc : INT ROM

OK

aladar

2007. 01. 16, 
kedd keltezéssel 16.10-kor andrew rinaldi ezt írta: 
> Hi 
>   Aladar, 
>  
> Get this working with Minicom first... then upgrade to 
>   the latest version of HylaFAX and try again. 
>  
> Regards 
>  
> ANDREW 
>   RINALDI 
> Mainpine Limited 
>   Support 
> USA +1 503 822 
>   9944 | Asia/Europe +44 1225 869439   
> andrew.rinaldi@xxxxxxxxxxxx | 
>   www.mainpine.com

---

From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Róth Tamás
Sent: 16 January 2007 16:03
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Modem on USB to serial converter

>
> Hi,
>
> I run into a problem with one box running debian sarge, hylafax 
>   4.2.1-5sarge3.
>
> if i do lsub it can see the 
>   USB to serial converter:
> Bus 002 Device 002: ID 
>   04b4:5500 Cypress Semiconductor Corp. HID->COM RS232 
>   Adapter
> the module for the kernel loaded, but 
>   when i try to do a faxaddmodem ttyUSB0 it detects the speed to 
>   be:
> Probing for best speed to talk to modem: 
>   38400 OK.
> But than it sais it can communicate to 
>   the modem like:
> If you're unsure and your modem 
>   supports it, use Class 1.
>
> The result of the 
>   AT+FCLASS=? command was:
>
> QV1E1
> OK
> ĺLASS=?
> 0,1,8
>
> OK
>
> any ideas on how to set it 
>   up correctly?
>
> thank you,
> aladar