Re: [hylafax-users] Modem on USB to serial converter

["andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Aladar,

 

Get this working with Minicom first... then upgrade to the latest version of HylaFAX and try again.

 

Regards

 

ANDREW RINALDI

Mainpine Limited Support

USA +1 503 822 9944 | Asia/Europe +44 1225 869439  

andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

---

From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Róth Tamás
Sent: 16 January 2007 16:03
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Modem on USB to serial converter

Hi,

I run into a problem with one box running debian sarge, 
hylafax 4.2.1-5sarge3.

if i do lsub it can see the USB to serial 
converter:
Bus 002 Device 002: ID 04b4:5500 Cypress Semiconductor Corp. 
HID->COM RS232 Adapter
the module for the kernel loaded, but when i try to 
do a faxaddmodem ttyUSB0 it detects the speed to be:
Probing for best speed 
to talk to modem: 38400 OK.
But than it sais it can communicate to the modem 
like:
If you're unsure and your modem supports it, use Class 1.

The 
result of the AT+FCLASS=? command 
was:

QV1E1
OK
ĺLASS=?
0,1,8

OK

any ideas on how to 
set it up correctly?

thank you,
aladar