 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Hylafax with winprinter hylafax send fax problem
- To: "'razidan'" <razidan@xxxxxxxxxxxxxxx>, "'Lee Howard'" <faxguy@xxxxxxxxxxxxxxxx>
- Subject: [hylafax-users] Hylafax with winprinter hylafax send fax problem
- From: "johnny" <johnny_xing@xxxxxxxxxxxx>
- Cc: <hylafax-users@xxxxxxxxxxx>
- Date: Tue, 16 Jan 2007 19:40:59 +0800
Hi, guys, I am using Hylafax with winprinter hylafax to send out fax through
my labtop.
And I received the following error, Any one knows the reason? I am sending
through the PSTN line.
The logs file has 2 different errors (partially copy down)
=========================================================
Jan 16 19:19:15.53: [ 7371]: SESSION BEGIN 000000017 6562271311
Jan 16 19:19:15.53: [ 7371]: HylaFAX (tm) Version 5.0.3
Jan 16 19:19:15.53: [ 7371]: SEND FAX: JOB 4 DEST 62271311 COMMID 000000017
DEVICE '/dev/ttyIAX' FROM 'root <johnny_xing@xxxxxxxxxxxx>' USER root
Jan 16 19:19:15.53: [ 7371]: STATE CHANGE: RUNNING -> SENDING
Jan 16 19:19:15.53: [ 7371]: <-- [12:AT+FCLASS=1\r]
Jan 16 19:19:15.53: [ 7371]: --> [2:OK]
Jan 16 19:19:15.53: [ 7371]: MODEM set XON/XOFF/FLUSH: input ignored, output
disabled
Jan 16 19:19:15.53: [ 7371]: DIAL 62271311
Jan 16 19:19:15.53: [ 7371]: <-- [13:ATDT62271311\r]
Jan 16 19:20:20.00: [ 7371]: --> [10:NO CARRIER]
Jan 16 19:20:20.00: [ 7371]: SEND FAILED: JOB 4 DEST 62271311 ERR No carrier
detected
Jan 16 19:20:20.00: [ 7371]: <-- [5:ATH0\r]
Jan 16 19:20:20.00: [ 7371]: --> [2:OK]
Jan 16 19:20:20.00: [ 7371]: MODEM set DTR OFF
Jan 16 19:20:20.00: [ 7371]: MODEM set baud rate: 0 baud (flow control
unchanged)
Jan 16 19:20:20.00: [ 7371]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jan 16 19:20:20.00: [ 7371]: SESSION END
================================================================
Upon retrying, the error logs is like this:
================================================
================================================
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 118
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 119
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 120
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 121
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 122
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 123
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 124
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 125
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 126
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 127
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 128
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 129
Jan 16 19:34:17.38: [ 8038]: SEND send frame number 130
Jan 16 19:34:17.38: [ 8038]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Jan 16 19:34:17.38: [ 8038]: <-- [9:AT+FRS=7\r]
Jan 16 19:34:17.42: [ 8038]: --> [2:OK]
Jan 16 19:34:17.42: [ 8038]: <-- [11:AT+FTM=146\r]
Jan 16 19:34:17.44: [ 8038]: --> [7:CONNECT]
Jan 16 19:34:17.44: [ 8038]: DELAY 400 ms
Jan 16 19:34:17.84: [ 8038]: <-- data [1026]
Jan 16 19:34:17.84: [ 8038]: <-- data [1031]
Jan 16 19:34:17.84: [ 8038]: <-- data [1038]
Jan 16 19:34:17.84: [ 8038]: <-- data [1033]
Jan 16 19:34:17.84: [ 8038]: <-- data [1030]
Jan 16 19:34:18.42: [ 8038]: <-- data [1034]
Jan 16 19:34:18.42: [ 8038]: <-- data [1034]
Jan 16 19:34:18.42: [ 8038]: <-- data [1046]
Jan 16 19:34:19.00: [ 8038]: <-- data [1036]
Jan 16 19:34:19.58: [ 8038]: <-- data [1030]
Jan 16 19:34:20.16: [ 8038]: <-- data [1028]
Jan 16 19:34:20.74: [ 8038]: <-- data [1030]
Jan 16 19:34:21.32: [ 8038]: <-- data [1031]
Jan 16 19:34:21.90: [ 8038]: <-- data [1032]
Jan 16 19:34:22.48: [ 8038]: <-- data [1033]
Jan 16 19:34:23.06: [ 8038]: <-- data [1034]
Jan 16 19:34:23.64: [ 8038]: <-- data [1029]
Jan 16 19:34:24.22: [ 8038]: <-- data [1029]
Jan 16 19:34:24.80: [ 8038]: <-- data [1032]
Jan 16 19:34:25.38: [ 8038]: <-- data [1035]
Jan 16 19:34:25.96: [ 8038]: <-- data [1033]
Jan 16 19:34:26.54: [ 8038]: <-- data [1032]
Jan 16 19:34:27.12: [ 8038]: <-- data [1035]
Jan 16 19:34:27.70: [ 8038]: <-- data [1032]
Jan 16 19:34:28.28: [ 8038]: <-- data [1030]
Jan 16 19:34:28.86: [ 8038]: <-- data [1034]
Jan 16 19:34:29.44: [ 8038]: <-- data [1032]
Jan 16 19:34:30.02: [ 8038]: <-- data [1031]
Jan 16 19:34:30.60: [ 8038]: <-- data [1032]
Jan 16 19:34:31.18: [ 8038]: <-- data [1033]
Jan 16 19:34:31.76: [ 8038]: <-- data [1036]
Jan 16 19:34:32.34: [ 8038]: <-- data [1034]
Jan 16 19:34:32.92: [ 8038]: <-- data [1044]
Jan 16 19:34:33.50: [ 8038]: <-- data [1028]
Jan 16 19:34:34.08: [ 8038]: <-- data [974]
Jan 16 19:34:34.66: [ 8038]: <-- data [2]
Jan 16 19:34:37.78: [ 8038]: --> [2:OK]
Jan 16 19:34:37.78: [ 8038]: MODEM set XON/XOFF/DRAIN: input ignored, output
disabled
Jan 16 19:34:37.78: [ 8038]: <-- [9:AT+FTS=7\r]
Jan 16 19:34:37.88: [ 8038]: --> [2:OK]
Jan 16 19:34:37.88: [ 8038]: <-- [9:AT+FTH=3\r]
Jan 16 19:34:37.88: [ 8038]: --> [7:CONNECT]
Jan 16 19:34:37.88: [ 8038]: <-- HDLC<7:FF C8 FD F2 00 00 41>
Jan 16 19:34:37.88: [ 8038]: <-- data [7]
Jan 16 19:34:37.88: [ 8038]: <-- data [2]
Jan 16 19:34:39.06: [ 8038]: --> [2:OK]
Jan 16 19:34:39.06: [ 8038]: SEND send PPS (partial page signal)
Jan 16 19:34:39.06: [ 8038]: SEND send MPS (more pages, same document)
Jan 16 19:34:39.06: [ 8038]: <-- [9:AT+FRH=3\r]
Jan 16 19:34:42.16: [ 8038]: --> [0:]
Jan 16 19:34:42.16: [ 8038]: MODEM <Empty line>
Jan 16 19:34:42.16: [ 8038]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 16 19:34:42.16: [ 8038]: <-- data [1]
Jan 16 19:34:42.16: [ 8038]: --> [2:OK]
Jan 16 19:34:42.16: [ 8038]: <-- [9:AT+FTH=3\r]
Jan 16 19:34:42.16: [ 8038]: --> [7:CONNECT]
Jan 16 19:34:42.16: [ 8038]: <-- HDLC<7:FF C8 FD F2 00 00 41>
Jan 16 19:34:42.16: [ 8038]: <-- data [7]
Jan 16 19:34:42.16: [ 8038]: <-- data [2]
Jan 16 19:34:43.34: [ 8038]: --> [2:OK]
Jan 16 19:34:43.34: [ 8038]: SEND send PPS (partial page signal)
Jan 16 19:34:43.34: [ 8038]: SEND send MPS (more pages, same document)
Jan 16 19:34:43.34: [ 8038]: <-- [9:AT+FRH=3\r]
Jan 16 19:34:46.44: [ 8038]: --> [0:]
Jan 16 19:34:46.44: [ 8038]: MODEM <Empty line>
Jan 16 19:34:46.44: [ 8038]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 16 19:34:46.44: [ 8038]: <-- data [1]
Jan 16 19:34:46.46: [ 8038]: --> [2:OK]
Jan 16 19:34:46.46: [ 8038]: <-- [9:AT+FTH=3\r]
Jan 16 19:34:46.46: [ 8038]: --> [7:CONNECT]
Jan 16 19:34:46.46: [ 8038]: <-- HDLC<7:FF C8 FD F2 00 00 41>
Jan 16 19:34:46.46: [ 8038]: <-- data [7]
Jan 16 19:34:46.46: [ 8038]: <-- data [2]
Jan 16 19:34:47.64: [ 8038]: --> [2:OK]
Jan 16 19:34:47.64: [ 8038]: SEND send PPS (partial page signal)
Jan 16 19:34:47.64: [ 8038]: SEND send MPS (more pages, same document)
Jan 16 19:34:47.64: [ 8038]: <-- [9:AT+FRH=3\r]
Jan 16 19:34:50.74: [ 8038]: --> [0:]
Jan 16 19:34:50.74: [ 8038]: MODEM <Empty line>
Jan 16 19:34:50.74: [ 8038]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 16 19:34:50.74: [ 8038]: <-- data [1]
Jan 16 19:34:50.74: [ 8038]: --> [2:OK]
Jan 16 19:34:50.74: [ 8038]: No response to PPS repeated 3 times.
Jan 16 19:34:50.74: [ 8038]: SEND end page
Jan 16 19:34:50.74: [ 8038]: SEND: No response to PPS repeated 3 times.;
Giving up after 3 attempts to send same page "docq/doc4.ps;f1", dirnum 0
Jan 16 19:34:50.74: [ 8038]: <-- [9:AT+FRS=7\r]
Jan 16 19:34:50.74: [ 8038]: --> [2:OK]
Jan 16 19:34:50.74: [ 8038]: <-- [9:AT+FTH=3\r]
Jan 16 19:34:50.76: [ 8038]: --> [7:CONNECT]
Jan 16 19:34:50.76: [ 8038]: <-- HDLC<3:FF C8 DF>
Jan 16 19:34:50.76: [ 8038]: <-- data [3]
Jan 16 19:34:50.76: [ 8038]: <-- data [2]
Jan 16 19:34:51.84: [ 8038]: --> [2:OK]
Jan 16 19:34:51.84: [ 8038]: MODEM input buffering enabled
Jan 16 19:34:51.84: [ 8038]: <-- [5:ATH0\r]
Jan 16 19:34:51.94: [ 8038]: --> [2:OK]
Jan 16 19:34:51.94: [ 8038]: MODEM set DTR OFF
Jan 16 19:34:51.94: [ 8038]: MODEM set baud rate: 0 baud (flow control
unchanged)
Jan 16 19:34:51.94: [ 8038]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jan 16 19:34:51.94: [ 8038]: SESSION END
=================================================
Best regards
johnny
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Hylafax with winprinter hylafax send fax problem
- From: andrew rinaldi
- Re: [hylafax-users] Hylafax with winprinter hylafax send fax problem
- From: Lee Howard
- Re: [hylafax-users] Hylafax with winprinter hylafax send fax problem
- References:
- Re: [hylafax-users] Hylafax port usage ( besides 4559)
- From: razidan
- Re: [hylafax-users] Hylafax port usage ( besides 4559)
- Prev by Date: [hylafax-users] Problem sending faxes with embedded fonts (evolution)
- Next by Date: Re: [hylafax-users] Hylafax with winprinter hylafax send fax problem
- Previous by thread: Re: [hylafax-users] Hylafax port usage ( besides 4559)
- Next by thread: Re: [hylafax-users] Hylafax with winprinter hylafax send fax problem
- Index(es):
Project hosted by iFAX Solutions