[hylafax-users] trouble sending fax

[Joe <joe@xxxxxxxxxxxxxxx>]

Can anyone tell me what happened here...

(I deleted the phone number)

Dec 20 13:12:33.90: [28128]: SESSION BEGIN 000006206 163020870354268
Dec 20 13:12:33.90: [28128]: HylaFAX (tm) Version 4.3.0
Dec 20 13:12:33.90: [28128]: SEND FAX: JOB 1101 DEST deleted COMMID 000006206 DEVICE '/dev/ttyS4' FROM 'deleted' USER 
lstager
Dec 20 13:12:33.90: [28128]: <-- [12:AT+FCLASS=1\r]
Dec 20 13:12:33.90: [28128]: --> [2:OK]
Dec 20 13:12:33.91: [28128]: DIAL deleted
Dec 20 13:12:33.91: [28128]: <-- [24:ATDTdeleted\r]
Dec 20 13:12:55.84: [28128]: --> [7:CONNECT]
Dec 20 13:12:57.55: [28128]: --> [2:OK]
Dec 20 13:12:57.55: [28128]: REMOTE NSF "00 00 49 04 CA 00 00 00 DA 80 48 04 86 23 89 61 19 10 02 B3 20 00 24 00 22 00"
Dec 20 13:12:57.55: [28128]: NSF remote fax equipment: Japan Electric
Dec 20 13:12:57.55: [28128]: <-- [9:AT+FRH=3\r]
Dec 20 13:12:57.55: [28128]: --> [7:CONNECT]
Dec 20 13:12:58.46: [28128]: --> [2:OK]
Dec 20 13:12:58.46: [28128]: REMOTE NSF "00 00 49 40 00 0E AC 00 00 C1 C8 00 21 12 14 30 92 12 C2 04 32 04 04 04 04 04 
04 04"
Dec 20 13:12:58.46: [28128]: NSF remote fax equipment: Japan Electric
Dec 20 13:12:58.46: [28128]: NSF remote station ID: "IHC L       "
Dec 20 13:12:58.46: [28128]: <-- [9:AT+FRH=3\r]
Dec 20 13:12:58.47: [28128]: --> [7:CONNECT]
Dec 20 13:12:59.16: [28128]: --> [2:OK]
Dec 20 13:12:59.16: [28128]: REMOTE CSI "deleted"
Dec 20 13:12:59.16: [28128]: <-- [9:AT+FRH=3\r]
Dec 20 13:12:59.17: [28128]: --> [7:CONNECT]
Dec 20 13:12:59.59: [28128]: --> [2:OK]
Dec 20 13:12:59.59: [28128]: REMOTE best rate 33600 bit/s
Dec 20 13:12:59.59: [28128]: REMOTE max A3 page width (303 mm)
Dec 20 13:12:59.59: [28128]: REMOTE max unlimited page length
Dec 20 13:12:59.59: [28128]: REMOTE best vres R16 x 15.4 line/mm
Dec 20 13:12:59.59: [28128]: REMOTE format support: MH, MR, MMR, JBIG
Dec 20 13:12:59.59: [28128]: REMOTE supports T.30 Annex A, 256-byte ECM
Dec 20 13:12:59.59: [28128]: REMOTE best 10 ms/scanline
Dec 20 13:12:59.59: [28128]: USE 14400 bit/s
Dec 20 13:12:59.59: [28128]: USE error correction mode
Dec 20 13:12:59.59: [28128]: SEND file "docq/doc1297.pdf;f0"
Dec 20 13:12:59.59: [28128]: Modem does not support document page width, max page width 0 pixels, image width 1084424192 
pixels
Dec 20 13:12:59.59: [28128]: <-- [9:AT+FTH=3\r]
Dec 20 13:13:00.55: [28128]: --> [7:CONNECT]
Dec 20 13:13:00.55: [28128]: <-- data [3]
Dec 20 13:13:00.55: [28128]: <-- data [2]
Dec 20 13:13:00.94: [28128]: --> [2:OK]
Dec 20 13:13:00.94: [28128]: <-- [5:ATH0\r]
Dec 20 13:13:01.29: [28128]: --> [2:OK]
Dec 20 13:13:01.29: [28128]: SESSION END

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*