[hylafax-users] facsimile job failed

["Steffen Bisgaard" <steffen_bisgaard@xxxxxxxxx>]

Hallo All,

I am probably on the wrong list, but thought I would try here. I have a hylafax setup with 2 modems on debian stable. Everything works, I can send faxes and receive faxes just fine.

I am trying to use the WHFC (Windows Hylafax Client), and the faxes are never sent. I always get the below error message. Has anyone got any idea on where to start troubleshooting this?

Many thanks.

Stef



 
Your facsimile job to 4860099 failed because:
    <no reason recorded>

    ---- Transcript of session follows ----

Dec 13 11:05:28.36: [29160]: SESSION BEGIN 000000565 31534860099 Dec 13 11:05:28.36: [29160]: HylaFAX (tm) Version 4.2.1 Dec 13 11:05:28.36: [29160]: SEND FAX: JOB 9 DEST 4860099 COMMID 000000565 DEVICE '/dev/ttyS0'
Dec 13 11:05:28.36: [29160]: <-- [12:AT+FCLASS=1\r] Dec 13 11:05:28.48: [29160]: --> [2:OK] Dec 13 11:05:28.48: [29160]: DIAL 9,4860099 Dec 13 11:05:28.48: [29160]: <-- [14:ATDT9,4860099\r] Dec 13 11:05:44.90: [29160]: --> [7:CONNECT] Dec 13 11:05:47.06: [29160]: --> [2:OK] Dec 13 11:05:47.06: [29160]: REMOTE NSF "00 00 00 00 00 00 00 00 00 00 00 00 00"
Dec 13 11:05:47.06: [29160]: NSF remote fax equipment: unknown - Japan Dec 13 11:05:47.06: [29160]: <-- [9:AT+FRH=3\r] Dec 13 11:05:47.08: [29160]: --> [7:CONNECT] Dec 13 11:05:47.96: [29160]: --> [2:OK] Dec 13 11:05:47.96: [29160]: REMOTE CSI "+31 53 4860099"
Dec 13 11:05:47.96: [29160]: <-- [9:AT+FRH=3\r] Dec 13 11:05:47.98: [29160]: --> [7:CONNECT] Dec 13 11:05:48.26: [29160]: --> [2:OK] Dec 13 11:05:48.26: [29160]: REMOTE best rate 14400 bit/s Dec 13 11:05:48.26: [29160]: REMOTE max A4 page width (215 mm) Dec 13 11:05:48.26: [29160]: REMOTE max unlimited page length Dec 13 11:05:48.26: [29160]: REMOTE best vres 7.7 line/mm Dec 13 11:05:48.26: [29160]: REMOTE best format 2-D MR Dec 13 11:05:48.26: [29160]: REMOTE best 0 ms/scanline Dec 13 11:05:48.26: [29160]: USE 14400 bit/s Dec 13 11:05:48.26: [29160]: USE 0 ms/scanline Dec 13 11:05:48.26: [29160]: <-- [9:AT+FTH=3\r] Dec 13 11:05:48.31: [29160]: --> [7:CONNECT] Dec 13 11:05:49.61: [29160]: --> [2:OK] Dec 13 11:05:49.61: [29160]: <-- [5:ATH0\r] Dec 13 11:05:50.53: [29160]: --> [2:OK] Dec 13 11:05:50.53: [29160]: SESSION END

    ---- Unsent job status ----

   Destination: 4860099
         JobID: 9
       GroupID: 9
        Sender: xxx
      Mailaddr: xxx
        CommID: 000000565
Submitted From: 10.2.43.23
    Page Width: 194 (mm)
   Page Length: 281 (mm)
    Resolution: 98 (lpi)
        Status:   (nothing available)
       Dialogs: 1 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 1 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 0 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are available on the server for reuse until they are automatically purged when this job is removed.  Documents may also be manually removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc9.ps.9              4 Unknown document type

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.18/584 - Release Date: 12/12/2006 11:17 PM
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.18/584 - Release Date: 12/12/2006 11:17 PM
 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*