Re: [hylafax-users] mis-interpreted senderID?

["SCIN - Danilo Bottino" <info@xxxxxxx>]

Same problem here with my MT modems.

Dec 05 15:22:30.54: [31886]: SESSION BEGIN 000006209 3842448
Dec 05 15:22:30.54: [31886]: HylaFAX (tm) Version 4.3.0
Dec 05 15:22:30.54: [31886]: CallID: "0119502823" ""
Dec 05 15:22:30.54: [31886]: <-- [4:ATA\r]
Dec 05 15:22:41.88: [31886]: --> [7:CONNECT]
Dec 05 15:22:41.88: [31886]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Dec 05 15:22:41.88: [31886]: RECV FAX: begin
Dec 05 15:22:41.88: [31886]: <-- data [32]
Dec 05 15:22:41.88: [31886]: <-- data [2]
Dec 05 15:22:41.91: [31886]: --> [7:CONNECT]
Dec 05 15:22:41.91: [31886]: <-- data [23]
Dec 05 15:22:41.91: [31886]: <-- data [2]
Dec 05 15:22:41.94: [31886]: --> [7:CONNECT]
Dec 05 15:22:41.94: [31886]: <-- data [13]
Dec 05 15:22:41.94: [31886]: <-- data [2]
Dec 05 15:22:44.21: [31886]: --> [2:OK]
Dec 05 15:22:44.21: [31886]: <-- [9:AT+FRH=3\r]
Dec 05 15:22:44.53: [31886]: --> [7:CONNECT]
Dec 05 15:22:46.29: [31886]: --> [2:OK]
Dec 05 15:22:46.29: [31886]: REMOTE TSI "0q   AUCHAN_RIVOLI_2"

It happens every one and then but _always_ with the same senders. I wonder 
if there's a way to strip off the 0q in faxrcvd with sed.. anyway, this 
monday I'll set SessionTracing to 0xFFF and I'll attach a full session log.

----- Original Message ----- 
From: "Mark" <hylafax2@xxxxxxxxxx>
To: <hylafax-users@xxxxxxxxxxx>
Sent: Friday, December 08, 2006 4:31 PM
Subject: Re: [hylafax-users] mis-interpreted senderID?q


> Lee Howard <faxguy <at> howardsilvan.com> writes:
>
> > Mark wrote:
> >
> > >Dec 07 13:17:09.10: [ 8675]: <-- [9:AT+FRH=3\r]
> > >Dec 07 13:17:09.37: [ 8675]: --> [7:CONNECT]
> > >Dec 07 13:17:11.08: [ 8675]: --> [2:OK]
> > >Dec 07 13:17:11.08: [ 8675]: REMOTE TSI "0q       +4618343428"
> > >
> >
> > Could you reproduce this log for us, but with SessionTracing at 0xFFF.
> > It would be nice to see the HDLC frame data here.
> >
> > Thanks,
> >
> > Lee.
>
>
> By the way, Lee,
>
> I happened to start my logging effort with both SESSION and SERVER 
> tracings set
> to 0xFFF.  Like that the inbound fax received/displayed no senderID at 
> all -
>
> When I turned SERVERTRACING back to 1, and leaving session tracing at 
> 0xFFF, the
> senderID showed up as it should (though with the "0q" in the senderID) ...
>
> Mark
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*