Re: [hylafax-users] LOG EXPLAIN

["Grygoriy Dobrovolskyy" <megahohol@xxxxxxxxx>]

Nov 20 14:00:32.05: [ 2651]: RECV: REJECT page quality, 14-line run (max 5)
that is my opinion too

2006/11/20, Jamin W. Collins <jcollins@xxxxxxxxxxxxxxxx >:

Sasa Ostrouska wrote:
> Hi to all !!
>
> Today I received a fax and this log was attached to the e-mail notify
> mesg. I would
> kindly ask if somebody can explain me why I have not received well the
> page.
>
> ---- log ----
>          Sender: 035 282XXX
>           Pages: 1
>         Quality: Normal
>            Size: ISO A4
>        Received: 2006:11:20 14:00:14
> Time To Receive: 0:28
>     Signal Rate: 14400 bit/s
>     Data Format: 2-D MR
>   Error Correct: No
>     Received On: ttyS0
>
> The full document was not received because:
>
>    COMREC received DCN
>
>    ---- Transcript of session follows ----
>
> Nov 20 13:59:54.37: [ 2651]: SESSION BEGIN 000000061 39048153xxxx
> Nov 20 13:59:54.37: [ 2651]: HylaFAX (tm) Version 4.3.0
> Nov 20 13:59:54.37: [ 2651]: <-- [4:ATA\r]
> Nov 20 14:00:04.12: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00:04.12: [ 2651]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
> Nov 20 14:00:04.12: [ 2651]: RECV FAX: begin
> Nov 20 14:00:04.15: [ 2651]: --> [1:]
> Nov 20 14:00:04.15: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00:04.16: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00: 07.38: [ 2651]: --> [2:OK]
> Nov 20 14:00:07.38: [ 2651]: <-- [9:AT+FRH=3\r]
> Nov 20 14:00:08.29: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00:09.90: [ 2651]: --> [2:OK]
> Nov 20 14:00:09.90 : [ 2651]: REMOTE TSI "035 282xxx"
> Nov 20 14:00:09.90: [ 2651]: <-- [9:AT+FRH=3\r]
> Nov 20 14:00:09.91: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00:10.22: [ 2651]: --> [2:OK]
> Nov 20 14:00: 10.22: [ 2651]: REMOTE wants 14400 bit/s
> Nov 20 14:00:10.22: [ 2651]: REMOTE wants A4 page width (215 mm)
> Nov 20 14:00:10.22: [ 2651]: REMOTE wants unlimited page length
> Nov 20 14:00:10.22: [ 2651]: REMOTE wants 3.85 line/mm
> Nov 20 14:00:10.22: [ 2651]: REMOTE wants 2-D MR
> Nov 20 14:00:10.22: [ 2651]: RECV training at v.17 14400 bit/s
> Nov 20 14:00:10.22: [ 2651]: <-- [11:AT+FRM=145\r]
> Nov 20 14:00: 11.92: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00:13.19: [ 2651]: RECV: TCF 2520 bytes, 0% non-zero, 2520
> zero-run
> Nov 20 14:00:13.20: [ 2651]: --> [10:NO CARRIER]
> Nov 20 14:00:13.20: [ 2651]: <-- [9:AT+FRS=7\r]
> Nov 20 14:00:13.43: [ 2651]: --> [2:OK]
> Nov 20 14:00:13.43: [ 2651]: TRAINING succeeded
> Nov 20 14:00:13.43: [ 2651]: <-- [9:AT+FTH=3\r]
> Nov 20 14:00:13.47: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00:14.78: [ 2651]: --> [1:]
> Nov 20 14:00:14.78: [ 2651]: --> [2:OK]
> Nov 20 14:00:14.78: [ 2651]: <-- [11:AT+FRM=146\r]
> Nov 20 14:00:16.20: [ 2651]: --> [7:CONNECT]
> Nov 20 14:00:16.20: [ 2651]: RECV: begin page
> Nov 20 14:00:32.05: [ 2651]: RECV: 1191 total lines, 45 bad lines, 14
> consecutive bad lines
> Nov 20 14:00:32.05: [ 2651]: RECV: REJECT page quality, 14-line run (max 5)
> Nov 20 14:00:32.05: [ 2651]: RECV: end page

My guess would be the four above lines.  I would take them to mean that
there were multiple (it appears 14) bad lines in the transmission and
that exceeded the current configuration (which seems to be 5) for
accepting the fax.

I'm new to reading Hylafax logs, so I could be completely off base.

--
Jamin W. Collins

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*