[hylafax-users] LOG EXPLAIN

["Sasa Ostrouska" <casaxa@xxxxxxxxx>]

Hi to all !!

Today I received a fax and this log was attached to the e-mail notify
mesg. I would
kindly ask if somebody can explain me why I have not received well the page.

---- log ----
         Sender: 035 282XXX
          Pages: 1
        Quality: Normal
           Size: ISO A4
       Received: 2006:11:20 14:00:14
Time To Receive: 0:28
    Signal Rate: 14400 bit/s
    Data Format: 2-D MR
  Error Correct: No
    Received On: ttyS0

The full document was not received because:

   COMREC received DCN

   ---- Transcript of session follows ----

Nov 20 13:59:54.37: [ 2651]: SESSION BEGIN 000000061 39048153xxxx
Nov 20 13:59:54.37: [ 2651]: HylaFAX (tm) Version 4.3.0
Nov 20 13:59:54.37: [ 2651]: <-- [4:ATA\r]
Nov 20 14:00:04.12: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:04.12: [ 2651]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Nov 20 14:00:04.12: [ 2651]: RECV FAX: begin
Nov 20 14:00:04.15: [ 2651]: --> [1:]
Nov 20 14:00:04.15: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:04.16: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:07.38: [ 2651]: --> [2:OK]
Nov 20 14:00:07.38: [ 2651]: <-- [9:AT+FRH=3\r]
Nov 20 14:00:08.29: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:09.90: [ 2651]: --> [2:OK]
Nov 20 14:00:09.90: [ 2651]: REMOTE TSI "035 282xxx"
Nov 20 14:00:09.90: [ 2651]: <-- [9:AT+FRH=3\r]
Nov 20 14:00:09.91: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:10.22: [ 2651]: --> [2:OK]
Nov 20 14:00:10.22: [ 2651]: REMOTE wants 14400 bit/s
Nov 20 14:00:10.22: [ 2651]: REMOTE wants A4 page width (215 mm)
Nov 20 14:00:10.22: [ 2651]: REMOTE wants unlimited page length
Nov 20 14:00:10.22: [ 2651]: REMOTE wants 3.85 line/mm
Nov 20 14:00:10.22: [ 2651]: REMOTE wants 2-D MR
Nov 20 14:00:10.22: [ 2651]: RECV training at v.17 14400 bit/s
Nov 20 14:00:10.22: [ 2651]: <-- [11:AT+FRM=145\r]
Nov 20 14:00:11.92: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:13.19: [ 2651]: RECV: TCF 2520 bytes, 0% non-zero, 2520 zero-run
Nov 20 14:00:13.20: [ 2651]: --> [10:NO CARRIER]
Nov 20 14:00:13.20: [ 2651]: <-- [9:AT+FRS=7\r]
Nov 20 14:00:13.43: [ 2651]: --> [2:OK]
Nov 20 14:00:13.43: [ 2651]: TRAINING succeeded
Nov 20 14:00:13.43: [ 2651]: <-- [9:AT+FTH=3\r]
Nov 20 14:00:13.47: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:14.78: [ 2651]: --> [1:]
Nov 20 14:00:14.78: [ 2651]: --> [2:OK]
Nov 20 14:00:14.78: [ 2651]: <-- [11:AT+FRM=146\r]
Nov 20 14:00:16.20: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:16.20: [ 2651]: RECV: begin page
Nov 20 14:00:32.05: [ 2651]: RECV: 1191 total lines, 45 bad lines, 14
consecutive bad lines
Nov 20 14:00:32.05: [ 2651]: RECV: REJECT page quality, 14-line run (max 5)
Nov 20 14:00:32.05: [ 2651]: RECV: end page
Nov 20 14:00:32.05: [ 2651]: --> [10:NO CARRIER]
Nov 20 14:00:32.05: [ 2651]: <-- [9:AT+FRH=3\r]
Nov 20 14:00:32.31: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:33.43: [ 2651]: --> [2:OK]
Nov 20 14:00:33.43: [ 2651]: RECV recv EOP (no more pages or documents)
Nov 20 14:00:33.43: [ 2651]: <-- [9:AT+FRS=7\r]
Nov 20 14:00:33.54: [ 2651]: --> [2:OK]
Nov 20 14:00:33.54: [ 2651]: <-- [9:AT+FTH=3\r]
Nov 20 14:00:33.68: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:34.99: [ 2651]: --> [1:]
Nov 20 14:00:34.99: [ 2651]: --> [2:OK]
Nov 20 14:00:34.99: [ 2651]: RECV send RTN (retrain negative)
Nov 20 14:00:35.00: [ 2651]: <-- [9:AT+FRH=3\r]
Nov 20 14:00:35.88: [ 2651]: --> [7:CONNECT]
Nov 20 14:00:37.07: [ 2651]: --> [2:OK]
Nov 20 14:00:37.07: [ 2651]: RECV recv DCN
Nov 20 14:00:37.07: [ 2651]: RECV keeping unconfirmed page
Nov 20 14:00:37.07: [ 2651]: RECV FAX: COMREC received DCN
Nov 20 14:00:37.07: [ 2651]: RECV FAX (000000061): session with 035
282xxx terminated abnormally: COMREC received DCN
Nov 20 14:00:37.07: [ 2651]: RECV FAX: bin/faxrcvd
"recvq/fax000000048.tif" "ttyS0" "000000061" "COMREC received DCN"
Nov 20 14:00:37.07: [ 2651]: RECV FAX: end
Nov 20 14:00:37.07: [ 2651]: SESSION END


Do I miss some configuration settings ?

Rgds
Saxa

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*