Re: [hylafax-users] 3com u.s. robotics 5

[Mauro Sanna <mauro.sanna@xxxxxxxxxxxxxxxxxx>]

> I can probably help if your problem is with the settings for this modem,   
> but your session log indicates there is something wrong with the number   
> given to hylafax to dial, and others on the list will be more able than I   
> to suggest where that's gone wrong (with the client?)
>
> Where your log shows "DIAL ??? # number" I would have expected it to say   
> "DIAL 8441" as per the 3rd line of your log. I suspect the problem is   
> with the client or how you are using it. How are you sending the fax -   
> using sendfax within a script or using a client of some sort? If the   
> former let us see the script. Might be useful to post doneq/q11.


Here is the complete session log:

nov 14 13:20:25.86: [ 4356]: SESSION BEGIN 000000066 00390708441
nov 14 13:20:25.86: [ 4356]: HylaFAX (tm) Version 4.2.1
nov 14 13:20:25.86: [ 4356]: SEND FAX: JOB 14 DEST 8441 COMMID 000000066 
DEVICE
'/dev/ttyS0'
nov 14 13:20:25.86: [ 4356]: <-- [9:AT+FLO=2\r]
nov 14 13:20:26.11: [ 4356]: --> [2:OK]
nov 14 13:20:26.11: [ 4356]: <-- [9:AT+FPP=0\r]
nov 14 13:20:26.36: [ 4356]: --> [2:OK]
nov 14 13:20:26.36: [ 4356]: <-- [9:AT+FBO=0\r]
nov 14 13:20:26.61: [ 4356]: --> [2:OK]
nov 14 13:20:26.61: [ 4356]: <-- [10:AT+FCT=30\r]
nov 14 13:20:26.86: [ 4356]: --> [2:OK]
nov 14 13:20:26.86: [ 4356]: <-- [15:AT+FNR=1,1,1,0\r]
nov 14 13:20:27.11: [ 4356]: --> [2:OK]
nov 14 13:20:27.11: [ 4356]: <-- [9:AT+FIE=0\r]
nov 14 13:20:27.36: [ 4356]: --> [2:OK]
nov 14 13:20:27.36: [ 4356]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
nov 14 13:20:27.62: [ 4356]: --> [2:OK]
nov 14 13:20:27.62: [ 4356]: DIAL 8441
nov 14 13:20:27.62: [ 4356]: <-- [9:ATDT8441\r]
nov 14 13:20:42.71: [ 4356]: --> [4:+FCO]
nov 14 13:20:46.00: [ 4356]: --> [27:+FCI:"          0706778441"]
nov 14 13:20:46.00: [ 4356]: REMOTE CSI "0706778441"
nov 14 13:20:46.00: [ 4356]: --> [20:+FIS:1,5,0,2,1,0,0,3]
nov 14 13:20:46.00: [ 4356]: --> [2:OK]
nov 14 13:20:46.00: [ 4356]: REMOTE best rate 14400 bit/s
nov 14 13:20:46.00: [ 4356]: REMOTE max A4 page width (215 mm)
nov 14 13:20:46.00: [ 4356]: REMOTE max unlimited page length
nov 14 13:20:46.00: [ 4356]: REMOTE best vres 7.7 line/mm
nov 14 13:20:46.00: [ 4356]: REMOTE best format 2-D MR
nov 14 13:20:46.00: [ 4356]: REMOTE best 10 ms/scanline
nov 14 13:20:46.00: [ 4356]: USE 14400 bit/s
nov 14 13:20:46.00: [ 4356]: USE 10 ms/scanline
nov 14 13:20:46.00: [ 4356]: <-- [5:ATH0\r]
nov 14 13:20:46.25: [ 4356]: --> [2:OK]
nov 14 13:20:46.25: [ 4356]: SESSION END

it says:

 FaxQueuer[4330]: NOTIFY: bin/notify "doneq/q14" "failed" "0:36"
Nov 14 13:20:46 fax1 FaxQueuer[4330]: NOTIFY exit status: 0 (4358)

I can't get where is the problem.
With another modem I can send faxes without any problem.
With this Robotic is a problem.
Here is my configuration:

ModemType:              Class2.0        # use class 2.0 interface
ModemRate:              9600            # DCE-DTE communication rate
ModemFlowControl:       rtscts          # hardware flow control
#
ModemNoFlowCmd:         AT&H0&I0&R1     # setup modem for no flow control
ModemHardFlowCmd:       AT&H1&I0&R2     # setup modem for hardware flow 
control
ModemSoftFlowCmd:       AT&H2&I2&R1     # setup modem for software flow 
control
#
ModemSetupDTRCmd:       ATS13=1&D2      # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier 
(or not)
ModemResultCodesCmd:    ATQ0X4          # enable extended result codes
#
ModemSetupAACmd:        AT+FAA=1

ModemSetVolumeCmd:      "ATM0 ATM1 ATM1 ATM1 ATM1"
#

Class2BUGCmd:           AT+FBU=0
#
#
Class2CQQueryCmd:       !(0),(0)        # override modem response
#
#
Class2NRCmd:    AT+FNR=1,1,1,0

Class2SendRTC:  yes
#
Class2APQueryCmd:       none

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*