HylaFAX The world's most advanced open source fax server |
I've been mucking around this for a few
days.
I am trying to configure an Email to Fax
setup using IAXmodem and Hylafax.
When I run it through my script I keep
getting emails that says "No local dialtone detected."
My IAXmodem and Hylafax config are configured in
reference to this Wiki.
My /usr/lib64/fax/sendfax.conf is a mix of
mgetty+sendfax config structure and the man page, and it readsat this time
(minus comments)
===========================
verbose y
Host 216.54.143.19
Protocol ssh Modem ttyIAX0:ttyIAX1:ttyIAX2:ttyIAX3 fax-devices ttyIAX0:ttyIAX1:ttyIAX2:ttyIAX3
fax-id 49 115 xxxxxxxx
ModemDialCmd: ATX3DT%s
max-tries 3
max-tries-continue y ======================
My Iaxmodems are set for context "internal-fax" and that context in
extensions.conf reads
====================
[internal-fax]
;exten => faxrcv,1,Dial(IAX2/iaxmodem1/${ARG2})
exten => faxrcv,1,Dial(IAX2/iaxmodem2/${ARG2}) exten => faxrcv,2,Dial(IAX2/iaxmodem3/${ARG2}) exten => faxrcv,3,Dial(IAX2/iaxmodem4/${ARG2}) exten => faxrcv,4,Busy exten => faxrcv,5,Hangup exten => _X.,1,Dial(zap/R1d/${EXTEN},60)
exten => _X.,2,Hangup() ================================== I've tried directing sendfax to both a telephone number and
"faxrcv".
Here are my versions of hylafax and iaxmodem.
[ebuild R ] net-misc/hylafax-4.3.0
USE="mgetty pam -faxonly -html -jbig" 0 kB
[ebuild R ] net-misc/iaxmodem-0.1.9 0 kB [2] This is a gentoo install, very similar to the wiki above.
(http://svn.netdomination.org/gentoo-voip/wiki/GentooAsteriskInstall)
Fax to Email is working nicely, by the way. I am trying to accomplish
email to fax in the opposite direction. I cannot seem to get sendfax to
work. If there is a way to fix this or another solution to make this work,
I would greatly appreciate it.
Joshua Nunn
Network Manager Cypress Telecommunications |