Re: [hylafax-users] T.30 T2 timeout, expected signal not received

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

SCIN - Danilo Bottino wrote:

> ago 12 17:01:29.56: [20664]: SEND send PPS (partial page signal)
> ago 12 17:01:29.56: [20664]: SEND send NULL (more blocks, same page)
> ago 12 17:01:29.56: [20664]: <-- [9:AT+FRH=3\r]
> ago 12 17:01:29.83: [20664]: --> [7:CONNECT]
> ago 12 17:01:37.78: [20664]: --> [5:ERROR]
> ago 12 17:01:37.78: [20664]: MODEM Command error
> ago 12 17:01:37.78: [20664]: FCS error


On the sender-side it just looks like the receiver hung up at roughly 
this moment.

> ago 12 17:01:29.56: [18047]: RECV recv PPS (partial page signal)
> ago 12 17:01:29.56: [18047]: RECV recv NULL (more blocks, same page)
> ago 12 17:01:29.56: [18047]: RECV received 81 frames of block 1 of page 8
> ago 12 17:01:29.56: [18047]: DELAY 70 ms
> ago 12 17:01:29.63: [18047]: <-- [9:AT+FTH=3\r]
> ago 12 17:01:30.50: [18047]: --> [7:AONNECT] 


"AONNECT" ?

Indeed, the receiving modem has some internal error and causes the modem 
to go on-hook at this moment.

Diagnosis: something's wrong with the receiving modem 
firmware/hardware.  Look for an upgrade, update, or replacement.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*