[hylafax-users] faxsend hangs?

[anthony andrew <anthonyvoip@xxxxxxxxx>]

Hello everybody,
Sorry if this question doesn't fit here but I am looking everywhere for errors finding nothing.
I have been sending several national faxes with no problem, now I am trying to send an international fax to Brazil but faxsend seems to hang waiting for something. I've reboot the server several times with no luck.
This is what my sessiontrace shows, hope you guys can figure something  out from here. Thanks.

Jul 27 18:28:32.05: [ 6013]: SESSION BEGIN 000003605 934572200552122571850
Jul 27 18:28:32.05: [ 6013]: HylaFAX (tm) Version 4.2.5.4
Jul 27 18:28:32.05: [ 6013]: SEND FAX: JOB 1536 DEST 0934572200552122571850 COMMID 000003605 DEVICE '/dev/ttyy0' FROM 'soluzamexviajes <soluzamexviajes@xxxxxxxx>' USER uucp
Jul 27 18:28:32.05: [ 6013]: STATE CHANGE: RUNNING -> SENDING
Jul 27 18:28:32.05: [ 6013]: <-- [12:AT+FCLASS=1\r]
Jul 27 18:28:32.05: [ 6013]: --> [2:OK]
Jul 27 18:28:32.07: [ 6013]: DIAL
 0934572200552122571850
Jul 27 18:28:32.07: [ 6013]: <-- [27:ATDT0934572200552122571850\r]
Jul 27 18:28:45.39: [ 6013]: --> [7:CONNECT]
Jul 27 18:28:45.69: [ 6013]: --> HDLC<11:FF C8 01 00 72 1D 01 01 88 A9 FF>
Jul 27 18:28:45.69: [ 6013]: --> [2:OK]
Jul 27 18:28:45.69: [ 6013]: REMOTE best rate 9600 bit/s
Jul 27 18:28:45.69: [ 6013]: REMOTE max A4 page width (215 mm)
Jul 27 18:28:45.69: [ 6013]: REMOTE max unlimited page length
Jul 27 18:28:45.69: [ 6013]: REMOTE best vres 15.4 line/mm
Jul 27 18:28:45.69: [ 6013]: REMOTE format support: MH
Jul 27 18:28:45.69: [ 6013]: REMOTE best 20 ms, 10 ms/scanline
Jul 27 18:28:45.69: [ 6013]: USE 9600 bit/s
Jul 27 18:28:45.69: [ 6013]: SEND file "docq/doc2855.ps;40"
Jul 27 18:28:45.71: [ 6013]: USE A4 page width (215 mm)
Jul 27 18:28:45.71: [ 6013]: USE unlimited page length
Jul 27 18:28:45.71: [ 6013]: USE 3.85 line/mm
Jul 27 18:28:45.71: [ 6013]: USE 1-D MH
Jul 27
 18:28:45.71: [ 6013]: USE 20 ms/scanline
Jul 27 18:28:45.71: [ 6013]: SEND training at v.29 9600 bit/s
Jul 27 18:28:45.71: [ 6013]: <-- [9:AT+FRS=7\r]
Jul 27 18:28:45.78: [ 6013]: --> [2:OK]
Jul 27 18:28:45.78: [ 6013]: <-- [9:AT+FTH=3\r]
Jul 27 18:28:45.78: [ 6013]: --> [7:CONNECT]
Jul 27 18:28:45.78: [ 6013]: <-- HDLC<23:FF C0 C2 E2 92 C2 F4 92 CA 2A 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jul 27 18:28:45.78: [ 6013]: <-- data [23]
Jul 27 18:28:45.78: [ 6013]: <-- data [2]
Jul 27 18:28:47.36: [ 6013]: --> [7:CONNECT]
Jul 27 18:28:47.36: [ 6013]: <-- HDLC<6:FF C8 C1 00 60 10>
Jul 27 18:28:47.36: [ 6013]: <-- data [6]
Jul 27 18:28:47.36: [ 6013]: <-- data [2]
Jul 27 18:28:47.66: [ 6013]: --> [2:OK]
Jul 27 18:28:47.66: [ 6013]: <-- [9:AT+FTS=7\r]
Jul 27 18:28:47.81: [ 6013]: --> [2:OK]
Jul 27 18:28:47.81: [ 6013]: <-- [10:AT+FTM=96\r]
Jul 27 18:28:47.81: [ 6013]:
 --> [7:CONNECT]
Jul 27 18:28:47.81: [ 6013]: <-- data [1024]
Jul 27 18:28:47.81: [ 6013]: <-- data [776]
Jul 27 18:28:47.81: [ 6013]: <-- data [2]
Jul 27 18:28:49.70: [ 6013]: --> [2:OK]
Jul 27 18:28:49.70: [ 6013]: <-- [9:AT+FRH=3\r]
Jul 27 18:28:52.04: [ 6013]: --> [7:CONNECT]
Jul 27 18:28:52.88: [ 6013]: --> HDLC<5:FF C8 22 67 DD>
Jul 27 18:28:52.88: [ 6013]: --> [2:OK]
Jul 27 18:28:52.88: [ 6013]: SEND training at v.29 7200 bit/s
Jul 27 18:28:52.88: [ 6013]: <-- [9:AT+FRS=7\r]
Jul 27 18:28:52.96: [ 6013]: --> [2:OK]
Jul 27 18:28:52.96: [ 6013]: <-- [9:AT+FTH=3\r]
Jul 27 18:28:52.96: [ 6013]: --> [7:CONNECT]
Jul 27 18:28:52.96: [ 6013]: <-- HDLC<23:FF C0 C2 E2 92 C2 F4 92 CA 2A 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jul 27 18:28:52.96: [ 6013]: <-- data [23]
Jul 27 18:28:52.96: [ 6013]: <-- data [2]
Jul 27 18:28:54.53: [ 6013]: --> [7:CONNECT]
Jul 27
 18:28:54.53: [ 6013]: <-- HDLC<6:FF C8 C1 00 70 10>
Jul 27 18:28:54.53: [ 6013]: <-- data [6]
Jul 27 18:28:54.53: [ 6013]: <-- data [2]
Jul 27 18:28:54.83: [ 6013]: --> [2:OK]
Jul 27 18:28:54.83: [ 6013]: <-- [9:AT+FTS=7\r]
Jul 27 18:28:54.98: [ 6013]: --> [2:OK]
Jul 27 18:28:54.98: [ 6013]: <-- [10:AT+FTM=72\r]
Jul 27 18:28:54.98: [ 6013]: --> [7:CONNECT]
Jul 27 18:28:54.98: [ 6013]: <-- data [1024]
Jul 27 18:28:54.98: [ 6013]: <-- data [326]
Jul 27 18:28:54.98: [ 6013]: <-- data [2]
Jul 27 18:28:56.88: [ 6013]: --> [2:OK]
Jul 27 18:28:56.88: [ 6013]: <-- [9:AT+FRH=3\r]
Jul 27 18:28:59.22: [ 6013]: --> [7:CONNECT]
Jul 27 18:29:00.07: [ 6013]: --> HDLC<5:FF C8 22 67 DD>
Jul 27 18:29:00.07: [ 6013]: --> [2:OK]

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com