 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Hylafax sending issue
- To: <mstowe@xxxxxxxxxxxxx>
- Subject: Re: [hylafax-users] Hylafax sending issue
- From: "Chris Duncan" <hylafax@xxxxxxxxx>
- Cc: <hylafax-users@xxxxxxxxxxx>
- Date: Thu, 6 Jul 2006 11:58:41 -0400
The page size was standard US Letter, (I have tried both A4 and standard) I am trying to fax to a machine that is next to me, it rings like once then just goes away Here is the log from me doing it from command line, thanks for the help Jul 6 11:54:57 localhost FaxSend[24122]: MODEM set DTR OFF Jul 6 11:54:57 localhost FaxSend[24122]: MODEM set baud rate: 0 baud (flow control unchanged) Jul 6 11:54:57 localhost FaxSend[24122]: DELAY 75 ms Jul 6 11:54:57 localhost FaxSend[24122]: MODEM set DTR ON Jul 6 11:54:57 localhost FaxSend[24122]: DELAY 2600 ms Jul 6 11:55:01 localhost FaxSend[24122]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF Jul 6 11:55:01 localhost FaxSend[24122]: DELAY 10 ms Jul 6 11:55:01 localhost FaxSend[24122]: MODEM flush i/o Jul 6 11:55:01 localhost FaxSend[24122]: <-- [4:ATZ\r] Jul 6 11:55:01 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:01 localhost FaxSend[24122]: DELAY 3000 ms Jul 6 11:55:04 localhost FaxSend[24122]: MODEM flush i/o Jul 6 11:55:04 localhost FaxSend[24122]: <-- [5:ATH1\r] Jul 6 11:55:04 localhost FaxSend[24122]: --> [4:ATH1] Jul 6 11:55:04 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:04 localhost FaxSend[24122]: <-- [10:AT+VCID=1\r] Jul 6 11:55:04 localhost FaxSend[24122]: --> [9:AT+VCID=1] Jul 6 11:55:04 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:04 localhost FaxSend[24122]: <-- [7:ATS0=0\r] Jul 6 11:55:04 localhost FaxSend[24122]: --> [6:ATS0=0] Jul 6 11:55:04 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:04 localhost FaxSend[24122]: <-- [5:ATE0\r] Jul 6 11:55:04 localhost FaxSend[24122]: --> [4:ATE0] Jul 6 11:55:04 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:04 localhost FaxSend[24122]: <-- [5:ATV1\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: <-- [5:ATQ0\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: <-- [7:ATS8=2\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: <-- [8:ATS7=60\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: <-- [12:AT+FCLASS=?\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [7:0,1,1.0] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports "Data" Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports "Class 1" Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports "Class 1.0" Jul 6 11:55:05 localhost FaxSend[24122]: <-- [12:AT+FCLASS=1\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: <-- [5:ATI3\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [19:www.soft-switch.org] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: MODEM: Mfr www.soft-switch.org Jul 6 11:55:05 localhost FaxSend[24122]: <-- [5:ATI0\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [7:spandsp] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: MODEM: Model spandsp Jul 6 11:55:05 localhost FaxSend[24122]: <-- [9:AT+FTM=?\r] Jul 6 11:55:05 localhost FaxSend[24122]: --> [39:24,48,72,73,74,96,97,98,121,122,145,146] Jul 6 11:55:05 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 3.85 line/mm Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 7.7 line/mm Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 15.4 line/mm Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports R16 x 15.4 line/mm Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 200 x 100 dpi Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 200 x 200 dpi Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 200 x 400 dpi Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 300 x 300 dpi Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 2400 bit/s Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 4800 bit/s Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 7200 bit/s Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 9600 bit/s Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 12000 bit/s Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 14400 bit/s Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports A4 page width (215 mm) Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports B4 page width (255 mm) Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports A3 page width (303 mm) Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports A4 page length (297 mm) Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports B4 page length (364 mm) Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports unlimited page length Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 1-D MH Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 2-D MR Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 2-D MMR Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports no ECM Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports T.30 Annex A, 64-byte ECM Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports T.30 Annex A, 256-byte ECM Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 0 ms/scanline Jul 6 11:55:05 localhost FaxSend[24122]: MODEM Supports 5 ms/scanline Jul 6 11:55:06 localhost FaxSend[24122]: MODEM Supports 10 ms, 5 ms/scanline Jul 6 11:55:06 localhost FaxSend[24122]: MODEM Supports 10 ms/scanline Jul 6 11:55:06 localhost FaxSend[24122]: MODEM Supports 20 ms, 10 ms/scanline Jul 6 11:55:06 localhost FaxSend[24122]: MODEM Supports 20 ms/scanline Jul 6 11:55:06 localhost FaxSend[24122]: MODEM Supports 40 ms, 20 ms/scanline Jul 6 11:55:06 localhost FaxSend[24122]: MODEM Supports 40 ms/scanline Jul 6 11:55:06 localhost FaxSend[24122]: MODEM WWW.SOFT-SWITCH.ORG spandsp/ Jul 6 11:55:06 localhost FaxSend[24122]: <-- [5:ATM0\r] Jul 6 11:55:06 localhost FaxSend[24122]: --> [2:OK] Jul 6 11:55:06 localhost FaxSend[24122]: STATE CHANGE: BASE -> RUNNING (timeout 30) Jul 6 11:55:06 localhost FaxSend[24122]: MODEM input buffering disabled Jul 6 11:55:06 localhost FaxSend[24122]: SEND FAX: JOB 8 DEST 16148714848 COMMID 000000026 DEVICE '/dev/ttyIAX' FROM 'myname <myname@xxxxxxxxxxxx>' USER root Jul 6 11:55:56 localhost FaxSend[24122]: SEND FAX: JOB 8 SENT in 0:30 Jul 6 11:56:11 localhost FaxSend[24122]: SEND FAX: JOB 8 SENT in 0:14 Jul 6 11:56:14 localhost FaxQueuer[18473]: NOTIFY: bin/notify "doneq/q8" "done" "1:18" Jul 6 11:56:15 localhost FaxQueuer[18473]: NOTIFY exit status: 0 (24133) -----Original Message----- From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Michael Stowe Sent: Thursday, July 06, 2006 11:50 AM To: Chris Duncan Cc: hylafax-users@xxxxxxxxxxx Subject: Re: [hylafax-users] Hylafax sending issue > Anyone have an idea why I would get this? I'm just trying to send a fax > out via winprinthylafax (simple windows client to send out fax's). I can > send a fax out manually via command line but not via this interface, > anyone have any insight? Thanks Not much info here, but perhaps some insights... What does it look like when it succeeds? Are you telling WinprintHylaFAX to use the A4 page size? > Jul 6 11:28:56 localhost FaxGetty[18482]: MODEM WWW.SOFT-SWITCH.ORG > spandsp/ I certainly find this intriguing. Does it have its own log with additional information? ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- References:
- Re: [hylafax-users] Hylafax sending issue
- From: Michael Stowe
- Re: [hylafax-users] Hylafax sending issue
- Prev by Date: Re: [hylafax-users] please i need ur help
- Next by Date: Re: [hylafax-users] Hylafax sending issue
- Previous by thread: Re: [hylafax-users] Hylafax sending issue
- Next by thread: [hylafax-users] How can I calculate number of pages in a PDF file?
- Index(es):
Project hosted by iFAX Solutions