Re: [hylafax-users] hylafax does not answer rings

[Steve-Kai Vyska <steve@xxxxxxxx>]

Hi,

since I'm trying on this for 3d now, there are no obvious questions, because I 
really don't know what is wrong!


Am Montag, 10. Juli 2006 17:57 schrieb Lívio Cipriano:
> Hi,
>
> Your dev must be /dev/isdnctrl1:

Ok that.


> "kcapi: Controller 1: fcpci-d000-201 attached"
>
> You don't have to link anything. Let me put you some questions, even if to
> obvious:
>
> Are you doing the instalation and testing it logged as root?;

yes I'm root on the system

> Do you have, under fax/etc/ the config and config.faxCAPI files?

yes I have

> After changing those files, do you reboot the host?

i tried bouth


for sure I put the mail Aspects of the config file here:

config:
#ContCoverPage:         "etc/cover.templ"
#DestControls:          "etc/destctrls"
#DialStringRules:       "etc/dialrules"
#QualifyCID:            "etc/cid"
#QualifyTSI:            "etc/tsi"
#ServerTracing:         0x08501
InternationalPrefix:    00
SendFaxCmd:             /usr/bin/c2faxsend




config.faxCAPI

SpoolDir:               /var/spool/hylafax
PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd
FaxReceiveUser:         uucp
FaxReceiveGroup:        dialout
LogFile:                /var/spool/hylafax/log/capi4hylafax
LogTraceLevel:          4
LogFileMode:            0600
HylafaxDeviceName:          faxCAPI it is liked s.d.
RecvFileMode:               0600
# ----------- incoming params -----------
Controller:             1
AcceptSpeech:           0
UseDDI:                 0
IncomingMSNs: faxnumber
AcceptGlobalCall:   1


babylon5:/dev# tail -f /var/spool/hylafax/log/capi4hylafax

Device "faxCAPI" uses 2 receive thread(s) with the following config:
Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO: Controller=1 : 
IncomingMSNs=fuxnumber
Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO:

So I hope I didn't vorget someting :-)

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*